FCC ID: 2AXJE-LA-WE2S WIFI Module

LA-WE2S User Manual File No.20200907-V2.0 This document shall come into effect on the date of approval and shall not be reproduced without permission. Contents 1 Product Overview................................................................................1 1.1 Product Characteristics............................................................ 1 1.2 Main Application Fields........................................................... 1 3 Overall dimension...............................................................................3 4 PCB Package Size................................................................................ 3 5 Pin Definition........................................................................................4 6 Electrical Parameters..........................................................................5 6.1 Absolute Electrical Parameters.............................................. 5 6.2 Working Conditions..................................................................5 7 RF Characteristics................................................................................ 7 7.1 Basic RF Characteristics............................................................7 7.2 WiFi Output Power....................................................................7 7.3 WiFi Receiving Sensitivity........................................................8 8 Application schematic diagram...................................................... 9 8.1 Breaker Application................................................................... 9 8.2 Non-metering version of smart socket.............................10 8.2.1 Single indicator application........................................ 10 8.2.2 Dual indicator application........................................... 10 8.3 Metering version smart socket............................................11 8.3.1 Single indicator application........................................ 11 8.3.2 Dual indicator application........................................... 12 9 Application scenarios.......................................................................12 1 Product Overview LA-WE2S is a Low-Power Embedded WiFi module. It is composed of a highly integrated radio frequency chip TR6260S1 and a small number of peripheral devices, with built-in WiFi network protocol stack and rich library functions. LA-WE2S is embedded with low-power 32-bit microcontroller, 1Mbyte flash memory and rich peripheral resources. Users can develop embedded WiFi products to meet their own needs based on these. 1.1 Product Characteristics 2.4GHzIEEE802.11b/g/n Adopt low power 32-bit CPU, and the main frequency is up to 160MHz Support STA / AP working mode Support WEP/WPA-PSK/WPA2-PSK Support SmartConfig with one click distribution network 1.2 Main Application Fields All kinds of electrical occasions Page 1 of 10 It is used in such scenes as switching socket, wall switch, wall socket and circuit breaker, and supports voice control and Amazon cloud voice. The TYWE2S module compatible with pin2pin graffiti Page 1 of 10 3 Overall Dimension 4 PCB Package Size Bottom view Top view Page 2 of 10 5 Pin Definition TOP Bottom No. Name Illustration 1 2 3 4 5 6 7 8 9 10 11 RST NC GPIO13 GPIO4 GPIO22 GPIO0 GPIO1 U1TX U1RX GND VDD Page 3 of 10 Low level reset N.C. Digital IO Digital IO Digital IO Digital IO Digital IO UART1_TX and Digital IO UART1_RX and Digital IO Power ground Power 3.3V 6 Electrical Parameters 6.1 Absolute electrical parameters Parameters Description Minimum Maximum Unit TS Working temperature VDD Supply voltage

-20

-0.3 85 3.6 V 6.2 Working conditions Parameters Description Minimum Typical Maximum Unit VDD Working voltage VDDIO IO voltage VIL IO low level input 3.0 1.8

-0 VIH IO high level input 0.7*VIO 3.3 3.3

3.6 3.6 0.3*VIO VIO VTH COMS threshold

0.5 VIO V V V V V Imax IO maximum drive 12 mA 6.3 Power consumption in operation mode Working mode Working status, Ta=25 Average Unit Fast connect The module is in the state of fast connection distribution network, distribution network Wi-Fi indicator light flashes quickly status Hot spot distribution The module is in hot distribution network state, Wi-Fi indicator network status light flashes slowly Network connection The module is in the networking state, and the Wi Fi indicator is status always on 120 mA 122 mA 105 mA Page 4 of 10 Networking attempt The module is in the working state of disconnection (trying to connect to the network), and the WiFi indicator is always off 110 mA Page 4 of 10 7 RF Characteristics 7.1 Basic RF characteristics Basic RF characteristics Parameter item Detailed description Working frequency 2.412~2.462GHz WiFi standard IEEE 802.11b/g/n(Channel 1-11) Data transmission rate 11b:1,2,5.5,11 (Mbps) 11g:6,9,12,18,24,36,48,54(Mbps) 11n:HT20 MCS7 Antenna type PCB antenna (default) 7.2 WiFi output power TX continuous transmission power Parameter Minimum Typical Rate 11M 54M HT20-MCS7

Mode RF average output power,802.11b CCK RF average output power,802.11g RF average output power,802.11n OFDM Mode Frequency error 18 16 14

Maximu Unit m dBm

dBm dBm dBm

-10 10 ppm Page 5 of 10 7.3 WiFi receiving sensitivity RX receiving sensitivity Parameter Pattern Rate Minimum Typical Maximu Unit m dBm 11M

-88.0 dBm 54M

-74.0 dBm

RF average output power,802.11b CCK RF average output Mode power,802.11g RF average output OFDM Mode power,802.11n HT20-MCS7

-70.6 dBm OFDM Mode Frequency error

-10

10 ppm Page 6 of 10 8 Application schematic diagram 8.1 Application of breaker K e y W i f i l i g h t P o w e r g r o u n d P o w e r s u p p l y 3 3 V

. R e a y l Page 7 of 10 8.2 Non-metering version of smart socket 8.2.1Single indicator application P o w e r g r o u n d P o w e r s u p p l y 3 3 V

. R e a y l W I F I l i g h t 8.2.2 Dual indicator application K e y K e y P o w e r g r o u n d P o w e r s u p p l y 3 3 V

. R e a y l W I F I l i g h t l R e a y l i g h t Page 8 of 10 8.3 Metering version smart socket 8.3.1 Single indicator application K e y P o w e r p u l s e C u r r e n t

v o l t a g e p u l s e P o w e r g r o u n d P o w e r s u p p l y 3 3 V

. R e a y l W I F I l i g h t C o n f i g u r e o u t p u t l v a u e Page 9 of 10 8.3.2 Dual indicator application K e y P o w e r p u l s e C u r r e n t

v o l t a g e p u l s e P o w e r g r o u n d P o w e r s u p p l y 3 3 V

. R e a y l W I F I l i g h t l R e a y l i g h t C o n f i g u r e o u t p u t l v a u e 9 Application Scenarios Support all kinds of intelligent lamps and sockets Page 10 of 10 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Please notice that if the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains FCC ID:2AXJE-LA-WE2S any similar wording that expresses the same meaning may be used. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The module is limited to OEM installation ONLY. The OEM integrator is responsible for ensuring that the end-user has no manual instruction to remove or install module. A separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and difference antenna configurations. There is requirement that the grantee provide guidance to the host manufacturer for compliance with Part 15B requirements. The OEM integrator is responsible for ensuring that the end-user has no manual instructions to rem-ove or install module. The module is limited to installation in mobile or fixed application. Page 10 of 10

0 >

aT

a ecu Ore Nth PS i Lea OTR) 50 TU

(eh mn UU

(ea In|

vA OR) aT mn il IO ROAR ay Aa Sn Pe. ett) Peete eM os UU By oe ATT LSTeest CR

Shenzhen Leadcoo Technology Co,.Ltd Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2020/9/10 SUBJECT: FCC Application for (FCC ID: 2AXJE-LA-WE2S) To Whom It May Concern:

We, the undersigned, hereby authorize Alisa Feng in Shenzhen Huaxia Testing Technology Co., Ltd at 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Shenzhen Huaxia Testing Technology Co., Ltd on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely,

(Must be signed by the person that is listed on the FCC Website) Signature:

Contact name: Zhao Feng Company name: Shenzhen Leadcoo Technology Co,.Ltd Address: No. 313-321, Building 4, Shenzhen Software Park Phase 1, Keji Middle 2nd Rd, Nanshan District, Shenzhen, Guangdong Province, China 518057 Date: 04/17/2018 VCB_F-01: Operating Procedures Form FCC Authorization v02 Page 1 of 1

No Shenzhen Leadcoo Technology Co,.Ltd FCC ID:2AXJE-LA-WE2S MODULAR APPROVAL LETTER Modular Approval Requirement

(i) The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements.

(ii) The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation.

(iii) The modular transmitter must have its own power supply regulation.

(iv) The modular transmitter must comply with the antenna and transmission system requirements of 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a unique antenna coupler

(at all connections between the module and the antenna, including the cable). The professional installation provision of 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section.

(v) The modular transmitter must be tested in a stand-alone configuration

(vi) The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number.

(vii) The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization.

(viii) The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. Yes Signature:

Printed name:Zhao Feng M:\Master Documents\TEMPLATES\Modular Approval Letter_140225.docx

Overview The Wi-Fi module is a 2.4GHz IEEE 802.11b/g/n Wi-Fi single chip solution with standard security features. With optimized power and RF performance, robustness, versatility, reliability, various power profiles, full features and functions, the chip is designed for a wide variety of applications, including Smart home, Wearable devices and IoT (Internet of Things). It integrates a 32-bit microcontroller, 802.11b/g/n Wi-Fi baseband, a 2.4GHz RF transceiver with antenna switch, RF balun, PA (power amplifier), LNA (low noise receive amplifier) and filters, ample memory space, a general-purpose ADC(Analog-to-Digital Converter), 6-channel PWM(Pulse Width Modulation), flexible I/O interfaces, and multi-stage power management module. With the highly-integrated SoC, few external components and minimal PCB(Printed Circuit Board) area are needed to build Wi-Fi applications. The Wi-Fi module has many features of the state-of-the-art low power chips, such as good resolution clock gating, advanced management of multi-stage power modes, and dynamic power scaling. The Wi-Fi module CMOS for single-chip fully-integrated radio and Baseband, and also integrates advanced calibration circuitries that allow the solution to dynamically adjust itself to remove external circuit imperfections or adjust to changes in external conditions. Operation Frequency:

Channel Numbers:

Channel Separation:

Type of Modulation:

Transfer Rate:

IEEE 802.11b/g/n(HT20): 2412MHz to 2462MHz IEEE 802.11n(HT40): 2422MHz to 2452MHz IEEE 802.11b/g, IEEE 802.11n HT20: 11 Channels IEEE 802.11n HT40: 7 Channels 5MHz IEEE for 802.11b: DSSS(CCK,DQPSK,DBPSK) IEEE for 802.11g : OFDM(64QAM, 16QAM, QPSK, BPSK) IEEE for 802.11n(HT20 and HT40) : OFDM (64QAM,16QAM,QPSK,BPSK) IEEE for 802.11b:

1Mbps/2Mbps/5.5Mbps/11Mbps IEEE for 802.11g:

6Mbps/9Mbps/12Mbps/18Mbps/24Mbps/36Mbps/48Mbps/54Mbps IEEE for 802.11n(HT20):

6.5Mbps/13Mbps/19.5Mbps/26Mbps/39Mbps/52Mbps/58.5Mbps/65Mbps IEEE for 802.11n(HT40):

13.5Mbps/27Mbps/40.5Mbps/54Mbps/81Mbps/108Mbps/121.5Mbps/135Mbps PCB antenna Antenna Type:

Antenna Gain:

Power Supply:

RF Chip:

Crystal oscillator:

0dBi DC 3.3V TR6260-S1 40MHz Transmitter Operational Description The 2.4 GHz transmitter up-converts the quadrature baseband signals to the 2.4 GHz RF signal, and drives the antenna with a high powered Complementary Metal Oxide Semiconductor (CMOS) power amplifier. The use of digital calibration further improves the linearity of the power amplifier, enabling state-of-the-art performance of delivering +18.5 dBm of average power for 802.11b transmission and +14 dBm for 802.11n transmission. Additional calibrations are integrated to cancel any imperfections of the radio, such as:

Carrier leakage I/Q phase matching Baseband nonlinearities RF nonlinearities Antenna matching These built-in calibration routines reduce the amount of time and required for product test and make test equipment unnecessary Receiver Operational Description The 2.4 GHz receiver down-converts the 2.4 GHz RF signal to quadrature baseband signals and converts them to the digital domain with 2 high-resolution, high-speed ADCs. To adapt to varying signal channel conditions, RF filters, Automatic Gain Control (AGC), DC offset cancelation circuits and baseband filters are integrated within Wi-Fi Module.