treecam C390/C390S Battery video alarm camera User Manual V1.0 Shenzhen Leshi Video Technology Co., Ltd. www.freecamglobal.com
@ Magnetic bracket x1 Screw set x1 Type-c charging cable x1 Antitheft fine x1 Manual x3 B) C390S J0e0eH)0 4 oO @ @ @ @
Type-c charging cable x1 Anti-theft ine x1 Magnetic bracket x1 Screw set x1 Manual x3 Extension cable x1 (1 meters) Bracket for solar panel x1 8@ee0 B Camera Indicator Light Status Indicator ight status_| Description Solution Indicator blue Waiting for light is blinking configuration Ifit blinks over 2 minutes and still can't Gpanecting tothe | connect success, please reset device iF and check the router's WiFi signal Indicator light Normal operation is off or power off The C390/C390S is a smart siren and flash alarm camera that can be battery powered for long-term operation. e It only works when the PIR triggers the alarm or APP wakes up remotely. It usually keeps online with the way of deep sleep and low power consumption. The C390/C390S Can automatically woken up" if it detects the motion events within its field of alarm, Simultaneously push pictures and notify users and automatically recording in the cloud. 390/390S can wake up at once at anywhere&anytime and get remote live view on Mobile phone.
* Automatic sound and light alarm at night.
* Long-term work under normal sunshine conditions in most parts of the world (only for C390S). B Exterior diagram Prior operation of the camera, please carefully read and follow the installation and operation instructions, A) C390 Caution Light Anti-theft line [
| mounting hole =
Lens Mic Indicator Magnetic bracket status light WiFi key PIR eee Power switch Power state indicator Power cable Indicator light status | Description Blue Light on External charging Power state indicator Light off No charging B Installation Illustration 1) Check the strength of the WiFi signal at the location where you would like to position your camera by using your smartphone, 1) |
hy) }) |
B Technical parameters Kems Specifications Product model 6390 3908 Tens 2.8mm / 120 degrees Video H.264 encoding Audio support twowway audio WiFi Support IEE802,11b/gin protocol(2.4GHz) Infrared LED Support PIR motion detection Motion detect range ~ 9-27 feet partitions for set up Storage Builtin TF card or Cloud storage P2P Support acca aoeel APP support erne ji Warum aso ae 6800mAh, 10-20 times 6800mAh, Charged the solar Battory Standby | fpagiact over 160 daye, | activates 10-20 ims per day life time operating, Dimension Camera:7463112mm Solar panel:16414440mm Net weight Camera:260g _ Solar power kit:480g Waterproof evel P55 2) Switch on the camera power, 3) For the time the blue light is blinking, if not, please press the WiFi key for 3-5 seconds for reset, Add the camera to the app. (Please refer to the APP instruction manual) 4) The indicator light operation process fromblue light blinksred light blinksoff, The camera enters normal operation mode (sleeping mode), 5) Install the solar panel (only for C390S), 6) Positioning your camera and install it. C390 installation:
Tear off the sticker and paste it on a chosen location,drill the holes and drive in expansion bolts. Installation for the solar panel:
A Notice Prior installation of the camera, please charge it over 6 hours to a DC5V/1A regular smartphone power adaptor until the charging indicator light goes off by using the enclosed USB cable. C3908 Installation 1 Place the bracket aligned with the sticker, screw the bracket into the hole which drilled on the walll and screw the solar panel on the bracket afterwards. 2 Ideal location for installation. 2.1 Choose a location and direction where has as the most sufficient sunlight as possible for the solar panel installation. 2.2 Mount the solar panel on a wall or roof and connect the power line to the camera. The yellow indicatior on the panel and camera will be solid on when catch the sunshine. FCC ID:2AJPAC390S FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation, NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
= Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Fig. 4 The number of wake-up times/Day Average sunshine time (hour) Black 0 Red 1 Blue 2 Green 3 Note: The shaded area means charging the equipment artificially according to Practical situation. Continuous working time of camera (day) Fig. 2 If the camera detects false alerts frequently,you have option to turn off the motion detection function by selecting "Security" in APP and turn off the "Motion Detection" function in Protection menu. 1 Device adding failure?
Failure device adding to the app Solutions:
@ Make sure your router working properly(only supports 2.4GHz WiFi), and Mac addressing limitation option is not enabled .
@ Check the WiFi indicator light status, if it blinks red, reset the camera by pressing on the WiFi key for 3-5 seconds, enter password of the router and make sure there is sufficient WiFi signal, repeat device adding process. 2 Canluse the PC to read the camera TF card contents?
When the camera connecting WiFi, the recorded videos can be playbacked on the app.The PC software can also derive the videos as AVI format in LAN, Or use the card reader connects the TF card to the computer, playback on the PC software, 3 Why the camera battery goes out so quickly?
@ The camera is triggered frequently by frequent moving objects Turn off the Motion Detection or adjust the camera direction out from the filed with frequent moving objects for reduction of camera triggering.
@ Solar charging can only maintain normal camera operations. if solar energy is not sufficient enough for camera consumption. under this condition, you need to charge the camera with a power adaptor manually when you are reminded of low power.
* Please follow the link: www.freecamglobal.com for more FAQ(Frequently Asked Questions) solutions Contact: Mr Dong(Jet Darter Inc) ADD: 222 Yamato Road Suite 106-130 Boca Raton, FL 33431 US Phone : 302-229:7880 _ joeseasky@gmail.com 390-V1,0-E-L$0001-1/3