L820 AI Floodlight Cam Installation Guide V1.0 Please follow the link: www.freecamglobal.com for more FAQ(Frequently Asked Questions) solutions Shenzhen Leshi Video Technology Co., Ltd. www.freecamglobal.com AI Floodlight Cam is an outdoor security camera integrating surveillance and lighting with WiFi connection. Camera with built-in AI suspicious intrusion detection algorithm;
avoiding false alarms. Protection zone and lighting trigger can be set up on the APP. Combine outdoor security surveillance with lighting. 1080P full HD. 2 Indicator Light Status Indicator Light Status Status statement Red indicator is on Camera starts up,continue for 15 seconds Red indicator blinks Red indicator blinks (every 1 sec): WiFi configuration standby Blue indicator blinks Blue indicator blinks:connecting WiFi Blue indicator is on Connect WiFi successfully Red and blue indicator blinks alternately 2 indicators blink alternately (every 1 sec): Device upgrading Please keep charging 1 AI Floodlight Cam 3 Mounting Position And Protection Zone Front Back Lens Indicator light PIR infrared body sensor Mic Reset Speaker TF card slot 3.1 Check Wi-Fi availability The AI Floodlight Cam needs a stable and sufficient strong Wi-fi connection. 2.4GHz Please choose the location where you would like to position your AI Floodlight Cam and check the s t r e n g t h of the W i- f i s ig n al HSNVR**** using your smart phone. The table above indicates whether the WiFi signal is strong enough for use in combination with the AI Floodlight Cam. 3.2 Ideal installation height of motion detection 4.2 Installation notes:
When mounted at 9 feet above the ground 1.PIR Detection: When PIR detector parallels with the ground level, the sensor is optimized to detect human-sized objects at up to 30 feet away. 2.AI ModeSuspicious invasion detection Video recording will be triggered and the alert will be pushed to your phone when humanoid object is detected within 15 feet from the camera. Other moving objects will not trigger the alarm. Parallel to ground Height of installation from the ground is suggested around 9 feet.(3 meters) Motion sensor (Factory settings)has an horizontal range of 24 feet (8 Meters). Default setting of sensibility as Middle. Mounting bracket mounts to recessed or surface standard junction box. Junction box must be at least 1-1/2 inch in depth for proper installation. 4.3 NOTED These instructions assume youre replacing an existing floodlight and /or have a junction box where Floodlight Cam can be mounted. If you dont have a junction box, then youll need to hire a licensed electrician to install one. 9 feet 30 feet 4.4 Accessories and installation guide 4 Installation Illustration M820 AI Floodlight Cam needs (US)100-110VAC (EU)220-240VAC power supply (with live, neutral and ground connections). Before you start the installation please ensure the power is switched off at the main power switch. A B O peration instruction of the product 4.1 Safety instructions:
Prior to installation or maintenance, the electricity supply must be turned off. Please use the supply leads that must be at least 22AWG pvc coated wire. Be sure to connect ground lead. Screwdriver(2) Mounting Bracket A.Inch thread (2) B.Metric thread (2) Hook Wire Nuts (3) Manual (3) Cap Nuts (2) Installation instrustion C. Install the mounting bracket with the two posts level with the ground or level with your wall if mounting vertically on an overhand. Mounting bracket
#10-24x5/8 junction box screw wire nut M4X40 cover mounting screw Camera 4.5 Installation instructions:
A. Turn OFF power at the circuit breaker box. B. Loosen the knobs on the light fixtures to rotate them out of the way and allow access to the mounting screws. D. Make sure your existing wires come through the middle of the bracket. Attach the bracket to your junction box using at least two screws. L N GND E. Use the provided hook to hang floodlight cam from the bracket while connecting the wires. G. Carefully push all the wires through the large opening in the bracket. Align the mounting posts with the holes on floodlight cam and press together, securing the screw cap nuts with the screwdriver. Black:L White:N Copper:GND F. Use a wire nut to connect the white wire to the neutral wire coming out of your junction box. The black wire from the floodlight cam is a hot wire. Connect this wire to the hot wire coming out of your junction box using another wire nut. Connect the ground wire to the green ground screw on the bracket and the existing ground wire inside your junction box. Use one of the supplied wire nuts if necessary.
(Black:L White:N Copper:GND) H. After finished floodlight mounting Refer to the AI Floodlight Cam user manual to set up. 5 Technical Parameters Item Voltage input Frequency input Color temperature AI Floodlight Cam
(US)100-110VAC
(EU)220-240VAC 50HZ /60HZ 5000K Light Output(Lumens) 2150 (5000K) Power 24W Power for the camera 5V5%@Max.500mA Operation environment and protection
-20-50/IP55 WiFi Box dimension Weight 802.11 b/g/n
(L)205mm(W)163mm(H)200mm 1050g 6 FAQ Can I install a junction box myself?
If you do not have a junction box, you need to install one, we highly recommend that you engage a licensed electrician for installation. You'll need a 4-inch round waterproof junction box for use with this Floodlight Cam. FCC ID:2AJPAL820 FCC Warning
(1) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(2) (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter 820-V1.0-E-LS0001-1/3