LP-006D Multi-functional Industrial PDA User Manual Shenzhen Light Pioneer Technology Co., Ltd Guide Thank you for choosing LightPioneers multi-functional industrial Handheld Terminal LP-006D. To provide you the high quality experience, this device was designed on the basis of LightPioneers high technology and standard. This user manual is to help the users to quickly understand the products features and how to use it. Chapter 1. Physical Construction of the Handheld Terminal Chapter 2. Start to use Chapter 3,.General Description of Functions & Applications Chapter 4. How to use Chapter 5. Using environment Chapter 6. Technical support. Chapter 7. Appendix. Chapter 1, Physical Construction Of the Handheld Terminal
.Chapter 2, Start To Use 2.1 Check the packing list Handheld terminal * 1unit;
Battery *1piece;
1 Dedicated dc power adapter*1piece;
Warranty card * 1piece. Base kit (including power adapter and USB cable) * 1unit(Optional );
2.2, install SIM card/ PSAM card / battery. When you want to use GPRS function, please prepare a SIM card. When UMTS or HSDPA service is needed, please prepare PSAM card. How to install:
a, when the Handheld terminal is powered on, press the power off button or touch the icon on main menu, to ensure the Handheld terminal is powered off. Unscrew the locking screw, take off battery. b, Open the card slot, insert the SIM card (PSAM card) into the slot, keep golden fingers down forward, ensure the card is installed properly, close the card slot. c, install the battery. 2.3 Power On / Off Press the On/Off button on front keyboard for 3 seconds to boot the device, device enter standby mode as showed in Pic; slide right to enter the main menu . Press the On/Off button for three seconds to turn off the device. 2.4 Battery recharging When using the terminal at first time, please fully recharge the battery with DC adapter or base.Both DC adapter and USB cable can be used for recharging the battery. 2 Note:
Please do use the DC adapter and USB cable in the packages provided by the manufacturer. Using unidentified adapters or cables may cause battery explosion or damage your device. Prompt:
Low battery status will be displayed on the LCD with warning sounds when the battery is low. Auto power-off will be occurred when the battery is too low. If battery is exhausted, please recharge the terminal for a few minutes before trying to turn on the terminal. Use adapter to recharge the handheld. Note:
Improper connection may cause serious damage to the charger. Plug the charger into the standard power outlet. Prompt:
1. Its normal that the device will heat up during charging. 2. When battery is fully charged, disconnect the device and power adapter. Remove the adapter from AC power socket. To save battery consumption If Auto-sync, Bluetooth, or WLAN functions are operating, battery consumption would be faster. For saving battery power, please turn off unnecessary programs. Or adjust brightness and time of the background light, switch to sleep mode through touch icon when the device is not used. 2.5Install memory card TF card is needed if want to store more multi-media files. MicroSD or microSDHC card can 3 be used to extend the user memory, maximum up to 32GB (It depends on TF card manufacturers and sorts). Please use famous brand TF card as some brand may incompatible. Note:
Use incompatible card may damage the TF card or or cause the loss of data inside. The device solely support memory card only with FAT file construction format. For other types memory card, the device will require card formatting or indicates un-recognized memory card. If you insert TF card with Non-FAT file format, it will indicate unrecognized TF card or require you to erase all content and settings Frequent write and delete data will shorten the lifespan of the TF card. Installation steps:
1. Remove the battery cover. 2. Open SIM card slot first, and open memory card slot, install the TF card then close the cover. 3. Insert the TF card into the slot and lock in place. 4. Put the battery back. 2.6 Memory card format Formatting memory card on PC may cause card incompatibility with the terminal. Please only format the card on the terminal. Open APP list on main menu, choose SettingStorageUninstall SD card Confirm format SD cardDelete all. 4 Note: Please backup all data before formatting the SD card. The manufacturer's warranty service does not include data loss due to user operation. Chapter 3 Functions & Applications Introduction 3.1 Application Logistics industry for containers management, warehouse management, inventory checking etc.;
Smart vehicle management;
Automatic production management;
Electric ticket checking, and person ID card checking,etc. 3.2 Main functions UHF860~960MHzRFID reading (optional) UHF RFID readingcan read the EPC code of UHF RFID tags that comply with ISO18000-6C protocol, and write/modify the EPC code. The supported frequency range is 860-960MHz. Bar code scanningoptional Can scan one-dimensionalbarcode & two-dimensional barcode (QR code) with unlimited times QR code:PDF417.QR Code(Model 1/2) DataMatrix(ECC200.ECC000,080.100.140),Aztec,Maxiccde,etc;
One-dimension codeCode128.EAN-13,EAN-8,Code39,UPC-A,UPC-E,Codaba, China post 25,interteaved 2 of 5,ISBN/ISSN.Code93 A-GPSOptional To realize global coordinates positioning through built-in A-GPS module & antenna. WIFI/Bluetooth 5 Built-in WIFI(IEEE 802.11a/b/g/n/ac),built-in bluetooth class v2.1+EDR bluetooth v3.0+HS bluetooth v4.0 4G/GPRS(default WCDMA) 4G/GPRSbuilt-in 4G module, support WCDMA/GSM,etc. Chapter 4, How to use 4.1 Main Interface Introduction When the device is powered on, you will see the main interface as in below picture. Touch the settings icon on main menu, you can make setting to WiFi,Bluetooth, Data Usage etc. as in below picture. 6 NoteLP-006D also have other function like GPS, photoing,music and telephone,etc. Icons introduction:
Icon Definition No signal Signal strength GPRS network connected EDGE network connected UMTS network connected WLAN available WLAN connected Bluetooth available Bluetooth earphone connected GPS available Upload data. Download data. PC connected USB network share started WLAN hotspot SMS Alarm clock Activity noticifications 7 Mobile roamingout of normal service area Silent mode Vibration mode Flight mode Battery volume Current time 4. 2 U H F RFID Reading 4.2.2 UHF RFID Reading Support reading tags which comply with ISO18000-6C protocol. Can read and write tags EPC and user memory.. Click the UHF APP icon on main menu, to enter UHF tag reading interface, select the operation to be done and enter corresponding interface. 4.3 Bar code scan On the main menu, click barcode scan icon, enter into barcode scan interface (as in above left picture). There are two optionals: trigger(start), back to main menu. Trigger means starting scanning of QR code or One dimension code Back means return to main screen and exit the current bar code scan window. It equals to back button of keyboard. 8 4.4 GPS This function can get the correct position and display it on the electric map. When user set up the destination, system can automatically schedule the routine quickly. The GPS only can be used in outdoor. Please dont use it indoor. How to use: Select the Settings on main menu , click Location, turn it on. Please note:
system may need 10 mins or longer time to get the GPS signal in first time use. After that, the GPS signal can be caught quickly. 4.5 WIFI/Bluetooth WIFIbuilt-in WIFI module(IEEE 802.11a/b/g/n/ac)and can wireless connect the network. Bluetooth builtin bluetooth module. Can communicate with otherbluetooth devices(distance >10m if no obstacles) 4.64G/GPRS 4G/GPRSOptionbuilt-in 4G module. Can insert SIM card for GSM/GPRS/4G transmitting. 4.7 SMS or MMS 5.7.1, Sending SMS Touch the icon on main interface, select recipient, edit the message and send. 5.7.2 Sending MMS Touch on main interface, select recipient, touch to add topic, edit the text message, select to add video/pictures/voice recording. Send the message. 9 4.8 Photo shooting You can use the camera icon on main interface to take photo or video. Chapter 5 Using environment Operating temperature: -20~+55 Store temperature: -25~+70 Humidity: 5%~95% RH IP grade: IP65 Drop test: 1.2meters (4 feet) dropsurvival. Chapter 6TECHNICAL SUPPORT Please call our support line+86-755 2899 5422 PACKING LIST Chapter7APPEDEX ITEM Handheld terminal Battery Dedicated dc power adapter Warranty card Base kit (including power adapter and USB cable) QTY NOTE 1 1 1 1 1 DC+5V Optional 10 Letter to Customers Since our aim is to continuously improve our products for better user experience, we may modify the product characteristics, composition and design of circuits without given notifications. Thus the real product may be not in accordance with this manual. Generally, we will provide timely amendments to this manual but can not ensure. We apologize for the inconvenience caused and appreciate your understanding. FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. SAR Information Statement 1 Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 0.201W/Kg and when worn on the body, as described in this user guide, is 0.435W/Kg(Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). The maximum scaled SAR in hotspot mode is 0.438W/Kg.The maximum scaled SAR in extremity mode is 2 0.857W/Kg.While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RFexposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after searching on FCC ID: 2AOJULP006DAdditional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Asso-ciation
(CTIA) web-site at http://www.wow-com.com. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a sub-stantial margin of safety to give additional protection for the public and to account for any variations in measurements. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. 3 4