all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
UM | Users Manual | 668.28 KiB | July 23 2019 | |||
1 2 |
|
DTS REPORT | Test Report | 3.40 MiB | July 23 2019 | |||
1 2 |
|
EXT PHO | External Photos | 2.00 MiB | July 23 2019 | |||
1 2 |
|
FCC authorization | Cover Letter(s) | 145.85 KiB | July 22 2019 / July 23 2019 | |||
1 2 |
|
FCC confidence | Cover Letter(s) | 72.85 KiB | July 22 2019 / July 23 2019 | |||
1 2 |
|
INT PHO | Internal Photos | 4.50 MiB | July 23 2019 | |||
1 2 |
|
LABEL AND LOCATION | ID Label/Location Info | 58.61 KiB | July 23 2019 | |||
1 2 |
|
RF EXPO INFO | RF Exposure Info | 56.06 KiB | July 23 2019 | |||
1 2 |
|
TEST SETUP PHOTO | Test Setup Photos | 301.04 KiB | July 23 2019 | |||
1 2 |
|
15B REPORT | Test Report | 1.79 MiB | July 23 2019 |
1 2 | UM | Users Manual | 668.28 KiB | July 23 2019 |
4K Vehicle Blackbox DVR USER MANUAL
- 1 -
Thank you very much for purchasing our car dash cam!
Disclaimer:
1. Please read the set-up and usage instructions carefully before operation. 2. You should not set/install this dash cam at a place that would obstruct or reduce a drivers view. Make sure your usage comply with pertinent vehicle codes of your state, province, territory or country. 3. You should post the required notices of recordation to occupants inside the vehicle, if voices or other information/signal pertaining to in-vehicle activities will be recorded. 4. You should not change the dash cams setting or mode of operation when the vehicle is in motion. 5. You should not leave the dash cam in a visible spot when no one is inside the vehicle, to avoid attracting break-ins to steal the unit or other property. 6. You should avoid extended exposure of the dash cam to direct sunlight or extreme temperatures (either high or low temperature) which tend to degrade or damage the unit and its
- 1 -
normal functionality. 7. You should examine, check and verify the dash cam at least every 6 months, including the memory card, to ensure the video reception and recording are working properly. For each use, you should verify that the dash cam unit, the visible lights and the audible sounds are working normally. If there are signs of non-operation or malfunction, you should immediately seek to replace the product and check to see if the product is covered under any applicable warranty. 8. The dash cam unit may have additional functionality, such as transmission and recordation of audible or GPS signal or other identification information. If you have privacy concerns about these functions, make sure you follow the instruction to disable these functions. 9. You should use the dash cam unit in the way it is intended. You should not use the dash cam unit in a way that would be illegal or that tends to physically damage the unit, or tend to cause danger to the safe operation of the vehicle or the occupants. 10. THIS DEVICE SHOULD NOT BE ADJUSTED BY THE DRIVER WHILE DRIVING. IN THE EVENT OF AN ACCIDENT,
- 2 -
DEVICE MAY DISLODGE AND BECOME UNSAFE FOR PASSENGERS. Note :
1. This user manual will detail how to use, operation, technical specifications and precautions. Before use, please read this manual thoroughly and fully understand, Please keep this manual, we hope our products can meet your needs and long-term service to you!
Using this product, enjoying the real high quality life. 2. This manual in the printing process, the machine because of the appearance, software or hardware repair process leads to the same part of the manual operation of non-conformance, the Company has maintained the final interpretation!
3. Do not put the machine into the damp working condition, this machine have no waterproof function, so please make the machine no pour water or exposed to rain water. 4. Do not try open the shell or try repair by yourself, if the accessories for this machine have any problem, please do to the professional maintenance station to repair.
- 3 -
5. Do not use the thrill chemical substance, clean solvent or cleaner to clean this machine, please use the moist soft cloth to clean. 6. Do not use this machine under the condition that the dust and high density, to avoid affecting the video. 7. Please protect the environment, dont discard this machine randomly; do not throw this machine into fire, otherwise will have an explosion. 8. Please pay attention to clean the lens surface, use the moist soft cloth clean the lens then use, to avoid the video is not so good. Tips:
1. Outdoor use Please avoid high temperature and direct sun exposure. 2. Please use original accessories. 3. Please do not disassemble the product.
- 4 -
Content Guide 1. Product Structure 2. Product Installation Guide 3. Product Precautions 4. Product Specifications 5. App Operation Instructions 6. GPS Player Software Installation and using Instructions 7. FAQ
- 5 -
1. Product Structure 1. Power 2. WiFi 3.GPS 4.Micro USB 5. Speaker 6.Front Cam 7. Micro USB Port 8.Reset 9.Micro SD Card Slot 10.Dust proof Cover 11.Indicator Light 12.Charging Indicator Light 13. 3.0 OLED Touch Screen 14.Gesture Sensing 15. AV-in
- 6 -
Keys and Functions Key Function Instruction WiFi Turn on/ off the WiFI Power Turn on/Turn off Reset Reset USB port Charging/USB storage/Web camera 1.Turn onShort press WiFi to turn on 2.Turn offShort press WiFi to turn off 1.Turn onShort press Power to turn on and indicator lighted 2.Turn offLong press Power to turn off and indicator off When device crashes, shot press here to reboot 1.Connect to PC by USB cablewe can check video/photo and charge/ as the web camera for PC 2.Connect to the charger, camera will turn on to record and charging 2. Product Installation Guide 1.Turn off the car engine 2.Insert the TF card into the card slot of dash cam AttentionPlease use high-speed SD card (Class10 or above, capacity is not less than 8GB, max to 64GB, and to format the SD card with the machine or PC before using) 3.Fix the dash cam on the windscreen of your car
- 7 -
4. Insert the car charger into the car cigarette lighter, and please use the standard 1.5A car charger. 5.Install the rear camera on the rear of the vehicle and pay attention to the direction of the camera when installing. Pave the cable alongside the roof of the vehicle. After the installation is completed, put the rear plug into the rear camera interface of the dash cam, and connect the red reverse cable of the rear camera to the positive pole of the reverse lamp. 6. Connect the dash cam USB interface to the car charger with a charging extension cable. AttentionPave the cable alongside the edge of windshield. 7. Adjust the lens position to ensure that the lens are level with the ground. 8. Start the engine and check whether the machine is installed correctly. 3.Product Precautions 1.Before installation, please check the accessories carefully to ensure that the products and accessories are correct and complete, and then start the installation. 2.During installation, be sure not to insert the car key into the
- 8 -
power supply, and do not insert or pull out any machine accessories in the status of Power-on, including: rear camera, SIM card, SD card. These actions should be completed when power is turned off. 3.When the car key is plugged into the vehicle, the dash cam will automatically turn on. Please check whether the function of power on/off, the front and rear cameras and the rear view display are normal. 4.When the machine is in use, it is forbidden and dangerous to pull and insert the rear camera plug, GPS antenna and SD card, which will cause the recorded video files to be damaged and the machine to be abnormal or damaged. 5.If you need to download the recording videos and images, press SD card directly when the car is turned off. Then insert the SD card into the machine again when the vehicle is turned off. 6.You must use C10 high-speed card (recommended capacity 8G-32G), lower than C10 will cause problems like video stutter, black screen, video can not be recorded or not be played or not automatically be covered.
- 9 -
4.Product Specifications Product Feature G-sensor 4K, Dual 1080P dash cam Built-in(to save the file if emergency, and can t be deleted if the collision of vehicles happen) 3.0 OLED Touch Screen 150 Degree ultra wide angle VGA/1.3M/2MHD/3M/5M/8M/10M/12M Single Cam:
2880x2160 P24 1920x1080 P60 1920x1080 P30 1280x720 P120 1280x720 P60 1280x720 P30 Dual Cam: 1920*1080P 30FPS + 1920*1080P 30FPS H.264, MP4 F=1.8 English/Simplified Chinese etc. Black Support Support Support Support JPG TF card,Class 10 or above, Max support 64GB Screen Lens Photo Resolution Video Resolution Video Code-c Aperture Language Color Loop Recording Auto turn on/off while vehicle power on/off Motion detection Year/Month/Day/Ho ur/Minute Photo Format Memory card
- 10 -
Support Support Built on bracket 1Storage 2Charging 3.Power on and recording 5V 1.5A 400mAh Built-in Li-ion Battery Support
-10C to 60C MIC Speaker GPS USB port Power Interface Battery Parking Mode Working temperature 5.App Operation Instructions Downloading LuckyCam App Android system mobile phone Open the "Google play store" search "LuckyCam" to download and install. Open the APP "LuckyCam", click "Switch Connected Devices", then click on "WiFi settings" . Click WiFi Settings, enter the connection settings interface, search the machine WiFi, then enter the password: 12345678. Click Connect, the phone and camera will be connected, click the back button to see the camera shooting screen.
- 11 -
iOS system Apple phone Open the "Apple store" search "LuckyCam" to download and install. After the installation is completed, if you want "LuckyCam"
access to cell phone photos, please click "OK" (Note: you must select "OK", otherwise you can not preview the pictures download by APP ) Open the phone WiFi settings, search the WiFi Hotspot, search the dash cams WiFi, enter the password: 12345678. Using Your Dash Cam Turn on your dash cam, and short press the WiFi key to turn on WiFi function, then you will find the SSID and password. Once the camera connected with your smart phone by WiFi, enter into Luckycam App
- 12 -
Click to exchange the preview interface of front cam and rear cam
- 13 -
Click to take photo Click to turn on the audio function Click to set the video resolution Click to stop or begin recording Click Click Click Click Click to take photo to set photo resolution to check the files to check videos to check photos Click to download the files Click to delete the files Click to set the dash cam 6. GPS Player Software Installation and Using Instructions If need check the GPS information , the professional player must be installed firstly 1.Please install the customized video player 2.Please copy the customized video player to computer and install.
- 14 -
Using the player software:
1.Please open the customized video player and install it for the first time use. 2.Click File Open to choose the file which need play, and open the play mode directly, as below
- 15 -
7.FAQ Under normal operating conditions, if there is problems with the device, please refer to the following methods to solve. Q: Cannot take picture and record A: Please check whether there is enough space for of TF card, or if it is locked. Q: Stopping automatically while recording A: Due to the huge amount of HD video data, please use high-speed C10 TF card with SDHC compatible, there will be the mark of C10 on the TF card. Q: There is wrong file shown on LCD when replay the photo/video A: Because of TF card storage error, please format your TF card. Q: Fuzzy image A: Please check if the lens stay with dirt, fingerprints, please cleaned lens with paper before shooting.
- 16 -
Q: Dark image when when shooting the scene of sky or water A: There will have an impact on the exposure when the big difference between the scene. Please adjust the EV in the menu setting. Q: The color is not good in the cloudy or indoor A: Please check the white balance is Auto or not in the menu. Q: Horizontal stripes interference in the image, A: This is due to the wrong setting of light frequency error, please set the frequency 60HZ or 50HZ according to the local power supply. Q: Freezing A: Please reset to recover when device hangs off. FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The distance between user and products should be no less than 20cm This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:
-
-
-
-
Reorient the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into and outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
- 17 -
1 2 | EXT PHO | External Photos | 2.00 MiB | July 23 2019 |
8 EUT Constructional Details Report No: CCISE190304101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 52 of 74 Project No.: CCISE1707094 Report No: CCISE190304101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 53 of 74 Project No.: CCISE1707094 Report No: CCISE190304101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 54 of 74 Project No.: CCISE1707094 Report No: CCISE190304101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 55 of 74 Project No.: CCISE1707094 Report No: CCISE190304101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 56 of 74 Project No.: CCISE1707094 Report No: CCISE190304101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 57 of 74 Project No.: CCISE1707094 Report No: CCISE190304101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 58 of 74 Project No.: CCISE1707094 Report No: CCISE190304101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 59 of 74 Project No.: CCISE1707094 Report No: CCISE190304101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 60 of 74 Project No.: CCISE1707094
1 2 | FCC authorization | Cover Letter(s) | 145.85 KiB | July 22 2019 / July 23 2019 |
Shenzhen LINGDU Auto Electronics Co., Ltd. DATE:2019-6-27 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act asAgent On our behalf, I appoint Shenzhen Zhongjian Nanfang Testing Co.,Ltd.; 1st Floor, Block No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, ChinaBruce.Zhang, to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Shenzhen LINGDU Auto Electronics Co., Ltd. , still resides with 1801-1808 Haiyun Building, No. 468 Minzhi Avenue, Longhua,Shenzhen, Guangdong, China Dated this 2019-6-27 By:
Sophie Huang Signature Printed Title:
Manager On behalf of :
Shenzhen LINGDU Auto Electronics Co., Ltd. Telephone:
13823114619
1 2 | FCC confidence | Cover Letter(s) | 72.85 KiB | July 22 2019 / July 23 2019 |
Shenzhen LINGDU Auto Electronics Co., Ltd. DATE :2019-6-27 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2ASWV-GS31-GS31N Product Name: GS31- GS31N Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:
Schematics Block diagram Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 2018-6-27 By:
Title: Manager On behalf of :
Signature Telephone: 13823114619 Sophie Huang Printed Shenzhen LINGDU Auto Electronics Co., Ltd.
1 2 | INT PHO | Internal Photos | 4.50 MiB | July 23 2019 |
Report No: CCISE190304101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 61 of 74 Project No.: CCISE1707094 Report No: CCISE190304101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 62 of 74 Project No.: CCISE1707094 Report No: CCISE190304101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 63 of 74 Project No.: CCISE1707094 Report No: CCISE190304101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 64 of 74 Project No.: CCISE1707094 Report No: CCISE190304101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 65 of 74 Project No.: CCISE1707094 Report No: CCISE190304101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 66 of 74 Project No.: CCISE1707094 Report No: CCISE190304101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 67 of 74 Project No.: CCISE1707094 Report No: CCISE190304101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 68 of 74 Project No.: CCISE1707094 Report No: CCISE190304101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 69 of 74 Project No.: CCISE1707094 Report No: CCISE190304101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 70 of 74 Project No.: CCISE1707094 Report No: CCISE190304101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 71 of 74 Project No.: CCISE1707094 Report No: CCISE190304101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 72 of 74 Project No.: CCISE1707094 Report No: CCISE190304101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 73 of 74 Project No.: CCISE1707094
------End of report------
Report No: CCISE190304101 Shenzhen Zhongjian Nanfang Testing Co., Ltd. No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 74 of 74 Project No.: CCISE1707094
1 2 | 15B REPORT | Test Report | 1.79 MiB | July 23 2019 |
Shenzhen Zhongjian Nanfang Testing Co., Ltd. Report No: CCISE190304102 1 Cover Page FCC REPORT Applicant:
Shenzhen LINGDU Auto Electronics Co., Ltd. Address of Applicant:
1801-1808 Haiyun Building, No. 468 Minzhi Avenue, Longhua, Shenzhen, Guangdong, China Equipment Under Test (EUT) Product Name:
CAR DVR Model No.:
GS31- GS31N FCC ID:
2ASWV-GS31-GS31N Applicable standards:
FCC CFR Title 47 Part 15 Subpart B Date of sample receipt: 12 Mar., 2019 Date of Test:
13 Mar., to 05 Jul., 2019 Date of report issued:
06 Jul., 2019 Test Result:
* In the configuration tested, the EUT complied with the standards specified above. PASS*
Authorized Signature:
Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. Report No: CCISE190304102 2 Version Version No. Date 00 06 Jul., 2019 Description Original Tested by:
Date:
06 Jul., 2019 Test Engineer Reviewed by:
Date:
06 Jul., 2019 Project Engineer Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1903041 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2311 8282 Fax: +86 (0) 755 2311 6366 Page 2 of 18 Report No: CCISE190304102 3 Contents 1 2 3 4 5 COVER PAGE ....................................................................................................................................................... 1 VERSION ............................................................................................................................................................... 2 CONTENTS ........................................................................................................................................................... 3 TEST SUMMARY .................................................................................................................................................. 4 GENERAL INFORMATION .................................................................................................................................. 5 Page 5.1 CLIENT INFORMATION ...................................................................................................................................................... 5 5.2 GENERAL DESCRIPTION OF E.U.T. ...................................................................................................................................... 5 5.3 TEST MODE .................................................................................................................................................................... 5 5.4 MEASUREMENT UNCERTAINTY ........................................................................................................................................... 5 5.5 DESCRIPTION OF SUPPORT UNITS ....................................................................................................................................... 6 5.6 RELATED SUBMITTAL(S) / GRANT (S) ................................................................................................................................... 6 5.7 DESCRIPTION OF CABLE USED ............................................................................................................................................ 6 LABORATORY FACILITY ...................................................................................................................................................... 6 5.8 LABORATORY LOCATION ................................................................................................................................................... 6 5.9 5.10 TEST INSTRUMENTS LIST ............................................................................................................................................... 7 6 TEST RESULTS AND MEASUREMENT DATA ................................................................................................ 8 6.1 CONDUCTED EMISSION ..................................................................................................................................................... 8 6.2 RADIATED EMISSION ...................................................................................................................................................... 11 TEST SETUP PHOTO ........................................................................................................................................ 17 EUT CONSTRUCTIONAL DETAILS ................................................................................................................ 18 7 8 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1903041 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2311 8282 Fax: +86 (0) 755 2311 6366 Page 3 of 18 Report No: CCISE190304102 4 Test Summary Test Item Section in CFR 47 Conducted Emission Radiated Emission Part 15.107 Part 15.109 Result N/A Pass Remark:
Pass: The EUT complies with the essential requirements in the standard. N/A: The EUT not applicable of the test item. Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1903041 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2311 8282 Fax: +86 (0) 755 2311 6366 Page 4 of 18 Report No: CCISE190304102 5 General Information 5.1 Client Information Applicant:
Address:
Shenzhen LINGDU Auto Electronics Co., Ltd. 1801-1808 Haiyun Building, No. 468 Minzhi Avenue, Longhua, Shenzhen, Guangdong, China Manufacturer:
Shenzhen LINGDU Auto Electronics Co., Ltd. Address:
Factory:
Address:
1801-1808 Haiyun Building, No. 468 Minzhi Avenue, Longhua, Shenzhen, Guangdong, China Dongguan KAKA Electronic Technology Co., Ltd No.395,Huanshi East Road, Shitanpu, Tangxia Town, Dongguan, Guangdong, China 5.2 General Description of E.U.T. Product Name:
Model No.:
Power supply:
Car charging:
CAR DVR GS31- GS31N Rechargeable Li-ion Battery DC3.7V, 400mAh Model: HC-801 Input: DC 12V-24V Output: DC 5.0V, 2.5A Test Sample Condition:
The test samples were provided in good working order with no visible defects. 5.3 Test Mode Operating mode Detail description PC mode Keep the EUT in Downloading mode(Worst case) Charging+Recording mode Keep the EUT in Charging+Recording mode Charging+Playing mode Keep the EUT in Charging+Playing mode GPS mode Keep the EUT in GPS receiver mode The sample was placed 0.8m above the ground plane of 3m chamber. Measurements in both horizontal and vertical polarities were performed. During the test, each emission was maximized by: having the EUT continuously working, investigated all operating modes, rotated about all 3 axis (X, Y & Z) and considered typical configuration to obtain worst position, manipulating interconnecting cables, rotating the turntable, varying antenna height from 1m to 4m in both horizontal and vertical polarizations. The emissions worst-case are shown in Test Results of the following pages. 5.4 Measurement Uncertainty Parameters Expanded Uncertainty Conducted Emission (9kHz ~ 30MHz) Radiated Emission (9kHz ~ 30MHz) Radiated Emission (30MHz ~ 1000MHz) Radiated Emission (1GHz ~ 18GHz) Radiated Emission (18GHz ~ 40GHz) 1.60 dB (k=2) 3.12 dB (k=2) 4.54 dB (k=2) 5.84 dB (k=2) 3.36 dB (k=2) Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1903041 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2311 8282 Fax: +86 (0) 755 2311 6366 Page 5 of 18 Report No: CCISE190304102 5.5 Description of Support Units Manufacturer Description Model Serial Number FCC ID/DoC DELL DELL DELL DELL LENOVO PC OPTIPLEX745 MONITOR KEYBOARD MOUSE Laptop E178FPC SK-8115 MOC5UO SL510 N/A N/A N/A N/A 2847A65 DoC DoC DoC DoC DoC 5.6 Related Submittal(s) / Grant (s) This is an original grant, no related submittals and grants. 5.7 Description of Cable Used Cable Type Car adapter Detached USB Cable Description Unshielded Unshielded Length 3.5m 1.2m From EUT EUT To Adapter PC 5.8 Laboratory Facility The test facility is recognized, certified, or accredited by the following organizations:
FCC - Designation No.: CN1211 Shenzhen Zhongjian Nanfang Testing Co., Ltd. has been accredited as a testing laboratory by FCC(Federal Communications Commission). The test firm Registration No. is 727551. ISED CAB identifier.: CN0021 The 3m Semi-anechoic chamber of Shenzhen Zhongjian Nanfang Testing Co., Ltd. has been Registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 10106A-1. CNAS - Registration No.: CNAS L6048 Shenzhen Zhongjian Nanfang Testing Co., Ltd. is accredited to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration laboratories for the competence of testing. The Registration No. is CNAS L6048. A2LA - Registration No.: 4346.01 This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. The test scope can be found as below link: https://portal.a2la.org/scopepdf/4346-01.pdf 5.9 Laboratory Location Shenzhen Zhongjian Nanfang Testing Co., Ltd. Address: No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Email: info@ccis-cb.com, Website: http://www.ccis-cb.com Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1903041 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2311 8282 Fax: +86 (0) 755 2311 6366 Page 6 of 18 5.10 Test Instruments list Radiated Emission:
Test Equipment Manufacturer Model No. Serial No. 3m SAC SAEMC 9m*6m*6m 966 Loop Antenna SCHWARZBECK FMZB1519B 00044 BiConiLog Antenna SCHWARZBECK VULB9163 497 Report No: CCISE190304102 Cal. Date
(mm-dd-yy) Cal. Due date
(mm-dd-yy) 07-22-2017 03-18-2018 03-18-2019 03-18-2018 03-18-2019 03-18-2018 03-18-2019 06-22-2017 07-21-2020 03-17-2019 03-17-2020 03-17-2019 03-17-2020 03-17-2019 03-17-2020 06-21-2020 Horn Antenna SCHWARZBECK BBHA9120D 916 1805 Horn Antenna Horn Antenna SCHWARZBECK BBHA9120D SCHWARZBECK BBHA 9170 BBHA9170582 11-21-2018 11-20-2019 EMI Test Software AUDIX E3 Version: 6.110919b Pre-amplifier Pre-amplifier HP CD 8447D 2944A09358 PAP-1G18 11804 Spectrum analyzer Rohde & Schwarz FSP30 101454 03-18-2018 03-18-2019 03-18-2018 03-18-2019 03-18-2018 03-18-2019 03-17-2019 03-17-2020 03-17-2019 03-17-2020 03-17-2019 03-17-2020 Spectrum analyzer Rohde & Schwarz FSP40 100363 11-21-2018 11-20-2019 EMI Test Receiver Rohde & Schwarz ESRP7 101070 Cable Cable Cable ZDECL Z108-NJ-NJ-81 1608458 MICRO-COAX MFR64639 K10742-5 SUHNER SUCOFLEX100 58193/4PE Conducted Emission:
Test Equipment Manufacturer Model No. Serial No. EMI Test Receiver Rohde & Schwarz ESCI 101189 Pulse Limiter SCHWARZBECK OSRAM 2306 9731 LISN LISN Cable CHASE MN2050D 1447 Rohde & Schwarz ESH3-Z5 8438621/010 HP 10503A N/A 03-18-2018 03-18-2019 03-18-2018 03-18-2019 03-18-2018 03-18-2019 03-18-2018 03-18-2019 03-17-2019 03-17-2020 03-17-2019 03-17-2020 03-17-2019 03-17-2020 03-17-2019 03-17-2020 Cal. Date
(mm-dd-yy) Cal. Due date
(mm-dd-yy) 03-18-2018 03-18-2019 03-18-2018 03-18-2019 03-18-2018 03-18-2019 07-21-2018 03-18-2018 03-18-2019 03-17-2019 03-17-2020 03-17-2019 03-17-2020 03-17-2019 03-17-2020 07-20-2019 03-17-2019 03-17-2020 EMI Test Software AUDIX E3 Version: 6.110919b Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1903041 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2311 8282 Fax: +86 (0) 755 2311 6366 Page 7 of 18 Report No: CCISE190304102 6 Test results and Measurement Data 6.1 Conducted Emission Test Requirement:
FCC Part 15 B Section 15.107 Test Method:
ANSI C63.4:2014 Test Frequency Range:
150kHz to 30MHz Class / Severity:
Receiver setup:
Limit:
Class B Class B RBW=9kHz, VBW=30kHz Frequency range (MHz) 0.15-0.5 0.5-5 0.5-30 Limit (dBV) Quasi-peak 66 to 56*
56 60 Average 56 to 46*
46 50 Test setup:
* Decreases with the logarithm of the frequency. Test procedure 1. The E.U.T and simulators are connected to the main power through a line impedance stabilization network(L.I.S.N.). The provide a 50ohm/50uH coupling impedance for the measuring equipment. 2. The peripheral devices are also connected to the main power through a LISN that provides a 50ohm/50uH coupling impedance with 50ohm termination. (Please refers to the block diagram of the test setup and photographs). 3. Both sides of A.C. line are checked for maximum conducted interference. In order to find the maximum emission, the relative positions of equipment and all of the interface cables must be changed according to ANSI C63.4: 2014 on conducted measurement. Test environment:
Temp.:
22.5 C Humid.:
55%
Press.:
101kPa Test Instruments:
Refer to section 5.9 for details Test mode:
Test results:
Refer to section 5.3 for details Pass Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1903041 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2311 8282 Fax: +86 (0) 755 2311 6366 Page 8 of 18 Report No: CCISE190304102 Measurement data:
Product name:
CAR DVR Product model:
GS31- GS31N Test by:
YT Test mode:
PC mode Test frequency:
150 kHz ~ 30 MHz Phase:
Line Test voltage:
AC 120 V/60 Hz Environment:
Temp: 22.5 Huni: 55%
Notes:
1. An initial pre-scan was performed on the line and neutral lines with peak detector. 2. Quasi-Peak and Average measurement were performed at the frequencies with maximized peak emission. 3. Final Level =Receiver Read level + LISN Factor + Cable Loss. Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1903041 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2311 8282 Fax: +86 (0) 755 2311 6366 Page 9 of 18 Report No: CCISE190304102 Product name:
CAR DVR Product model:
GS31- GS31N Test by:
YT Test mode:
Test frequency:
150 kHz ~ 30 MHz Phase:
PC mode Neutral Test voltage:
AC 120 V/60 Hz Environment:
Temp: 22.5 Huni: 55%
Notes:
1. An initial pre-scan was performed on the line and neutral lines with peak detector. 2. Quasi-Peak and Average measurement were performed at the frequencies with maximized peak emission. 3. Final Level =Receiver Read level + LISN Factor + Cable Loss. Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1903041 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2311 8282 Fax: +86 (0) 755 2311 6366 Page 10 of 18 6.2 Radiated Emission Test Requirement:
FCC Part 15 B Section 15.109 Report No: CCISE190304102 Test Method:
Test Frequency Range:
Test site:
Receiver setup:
ANSI C63.4:2014 30MHz to 25000MHz Measurement Distance: 3m (Semi-Anechoic Chamber) Frequency Detector 30MHz-1GHz Quasi-peak Above 1GHz Peak RMS RBW 120kHz 1MHz 1MHz VBW Remark 300kHz Quasi-peak Value 3MHz 3MHz Average Value Peak Value Limit:
Frequency Limit (dBuV/m @3m) Remark 30MHz-88MHz 88MHz-216MHz 216MHz-960MHz 960MHz-1GHz Above 1GHz 40.0 43.5 46.0 54.0 54.0 74.0 Quasi-peak Value Quasi-peak Value Quasi-peak Value Quasi-peak Value Average Value Peak Value Test setup:
Below 1GHz Above 1GHz Shenzhen Zhongjian Nanfang Testing Co., Ltd. No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2311 8282 Fax: +86 (0) 755 2311 6366 Project No.: CCISE1903041 Page 11 of 18 Test Procedure:
1. The EUT was placed on the top of a rotating table 0.8 meters above Report No: CCISE190304102 the ground at a 3 meter semi-anechoic camber. The table was rotated 360 degrees to determine the position of the highest radiation. 2. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. 3. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. 4. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. 5. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. 6. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. Test environment:
Temp.:
24 C Humid.:
57%
Press.:
1 01kPa Test Instruments:
Refer to section 5.9 for details Test mode:
Test results:
Remark:
Refer to section 5.3 for details Passed All of the observed value above 6GHz are the niose floor , Only report worse case from 30MHz to 6GHz Shenzhen Zhongjian Nanfang Testing Co., Ltd. No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2311 8282 Fax: +86 (0) 755 2311 6366 Project No.: CCISE1903041 Page 12 of 18 Report No: CCISE190304102 Measurement Data:
Below 1GHz:
Product Name:
CAR DVR Product Model:
GS31- GS31N Test By:
YT Test mode:
PC mode Test Frequency:
30 MHz ~ 1 GHz Polarization:
Vertical Test Voltage:
AC 120V/60Hz Environment:
Temp: 24 Huni: 57%
Remark:
1. Final Level = Receiver Read level + Antenna Factor + Cable Loss Preamplifier Factor. 2. The emission levels of other frequencies are very lower than the limit and not show in test report. Shenzhen Zhongjian Nanfang Testing Co., Ltd. No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2311 8282 Fax: +86 (0) 755 2311 6366 Project No.: CCISE1903041 Page 13 of 18 Report No: CCISE190304102 Product Name:
CAR DVR Product Model:
GS31- GS31N Test By:
YT Test mode:
PC mode Test Frequency:
30 MHz ~ 1 GHz Polarization:
Horizontal Test Voltage:
AC 120V/60Hz Environment:
Temp: 24 Huni: 57%
Remark:
1. Final Level = Receiver Read level + Antenna Factor + Cable Loss Preamplifier Factor. 2. The emission levels of other frequencies are very lower than the limit and not show in test report. Shenzhen Zhongjian Nanfang Testing Co., Ltd. No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2311 8282 Fax: +86 (0) 755 2311 6366 Project No.: CCISE1903041 Page 14 of 18 Report No: CCISE190304102 Above 1GHz:
Product Name:
CAR DVR Product Model:
GS31- GS31N Test By:
YT Test mode:
PC mode Test Frequency:
1 GHz ~ 6 GHz Polarization:
Vertical Test Voltage:
AC 120V/60Hz Environment:
Temp: 24 Huni: 57%
Remark:
1. Final Level = Receiver Read level + Antenna Factor + Cable Loss Preamplifier Factor. 2. The emission levels of other frequencies are very lower than the limit and not show in test report. Shenzhen Zhongjian Nanfang Testing Co., Ltd. No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2311 8282 Fax: +86 (0) 755 2311 6366 Project No.: CCISE1903041 Page 15 of 18 Report No: CCISE190304102 Product Name:
CAR DVR Product Model:
GS31- GS31N Test By:
YT Test mode:
PC mode Test Frequency:
1 GHz ~ 6 GHz Polarization:
Horizontal Test Voltage:
AC 120V/60Hz Environment:
Temp: 24 Huni: 57%
Remark:
1. Final Level = Receiver Read level + Antenna Factor + Cable Loss Preamplifier Factor. 2. The emission levels of other frequencies are very lower than the limit and not show in test report. Shenzhen Zhongjian Nanfang Testing Co., Ltd. No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2311 8282 Fax: +86 (0) 755 2311 6366 Project No.: CCISE1903041 Page 16 of 18
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-07-23 | 2422 ~ PowerOutput | DTS - Digital Transmission System | Original Equipment |
2 | PowerOutput | JAB - Part 15 Class B Digital Device |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2019-07-23
|
||||
1 2 | Applicant's complete, legal business name |
Shenzhen LINGDU Auto Electronics Co., Ltd.
|
||||
1 2 | FCC Registration Number (FRN) |
0028367936
|
||||
1 2 | Physical Address |
Longhua,Shenzhen, Guangdong, China
|
||||
1 2 |
shenzhen, N/A
|
|||||
1 2 |
China
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
d******@compliancetesting.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
app s | FCC ID | |||||
1 2 | Grantee Code |
2ASWV
|
||||
1 2 | Equipment Product Code |
GS31-GS31N
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
S****** H******
|
||||
1 2 | Telephone Number |
13823********
|
||||
1 2 | Fax Number |
+86-7********
|
||||
1 2 |
i******@szdome.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | JAB - Part 15 Class B Digital Device | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | GS31- GS31N | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power listed is conducted. This device has a 20 MHz and 40 MHz bandwidth mode.The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Shenzhen Zhongjian Nanfang Testing Co., Ltd.
|
||||
1 2 | Name |
B**** Z****
|
||||
1 2 | Telephone Number |
+86 (********
|
||||
1 2 |
b******@ccis-cb.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2412 | 2462 | 0.021627 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15C | CC | 2422 | 2452 | 0.010691 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15B | CC |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC