FCC ID: 2ARI5-B2302 MagEZ Car Mount Pro 2

2023/09/12 V0 2. Fasten the Air Vent hook onto the air vent grille. MagEZ Car Mount Pro 2 Quick Guide Kurzanleitung Commencer rapidement 4. Plug the cable into the MagEZ Car Mount Pro USB port, and the other end of the cable into your car adapter. Plug the adapter into the car s power outlet. MagEZ Car Mount Pro USB Info /

Package Includes:

Model Material Input Output Ball head B2302 Aramid ber + PC + ABS 5V/3A, 9V/2A, 12V/1.5A 5W/7.5W/10W/15W Max 17mm B2302

+ PC + ABS MagEZ Car Mount Pro 2 USB-C Charging Cable User Manual Quick Guide

5V/3A, 9V/2A, 12V/1.5A 1. Attach the mount to the air vent hook and secure it by 3. Turn the lock to secure the hook in place. 5W/7.5W/10W/15W Max turning the bolt . 17mm 5. Attach your device. B2302

+PC+ABS 5V/3A, 9V/2A, 12V/1.5A 5W/7.5W/10W/15W Max 17mm Scan QR code for video instruction Scan to check how to use NFC FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off ff and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator &your body. MagEZ Car Mount Pro 2 Quick Guide Kurzanleitung Commencer rapidement IC Warning This device complies with Industry Canada s licence-exempt RSS standard (s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence. L'exploitation est autorise aux deuxconditions suivantes:

(1) l'appareil nedoit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi,mme si le brouillage est susceptible d'en compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numrique de la classe B est conforme la norme NMB-003 duCanada. IC RF Statement: When using the product, maintain a distance of 1 0cm from the body to ensure compliance with RF exposure requirements. 80x110mm

:105g MCMP2-GD-003 303030284 1mm 1:1 mm

M a g E Z M o d e l

B 2 C a r M o 3 u 0 n 2 t P r o F C 2 C

N I D F

2 C A R I 5

B 2 3 0 2 IC

:27 In pu t/: 5 V 0 8 0

-B 23 02 O u t V

5 3 9/

A t /

p u 1 0 0 0 0 A 3 5 5 2 8 3

a n i h C 5 1 0 C n i e d a

. N S M W 51

A W 5. 1 0 1

V2 1/

5

.7

W A 2 W

- Shenzhen Lingyi Innovation Technology Co., Ltd. -

Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 5/5/23 Shenzhen Lingyi Innovation Technology Co., Ltd. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought:

Name and company of U.S. agent: Linkwld LLC Physical U.S. address of agent: 1942 Broadway St. STE 314C, Boulder, CO, 80302, US FRN of U.S. agent: 0033625682 Email address of U.S. agent: Timothy.linkwld@proton.me Linkwld LLC acknowledges their obligation to accept service of process on behalf of Shenzhen Lingyi Innovation Technology Co., Ltd.. Shenzhen Lingyi Innovation Technology Co., Ltd. with the FRN [0027932185] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). Sincerely, Signature 4 0 V

[Name]: Hailey

[Title]Certification Engineer

[Company]: Shenzhen Lingyi Innovation Technology Co., Ltd.

, U

) 7

) d

1 1 9 2 _ t n e g A _ S U

l e d o m

_ 8 4 Signature The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB.

- Shenzhen Lingyi Innovation Technology Co., Ltd. -

[Name of U.S. agent] Timothy Zhu

[Title of U.S. agent]Manager

[Company of U.S. agent] Linkwld LLC The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB.

Shenzhen Lingyi Innovation Tech Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 9/26/23 To whom it may concern:

We, [Shenzhen Lingyi Innovation Tech Co., Ltd.], hereby certify that the equipment for which authorization is sought (FCC ID: [2ARI5-B2302]) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and (d)(5) and (6). Sincerely, Signature

[yanhui li]

[General manager]

Shenzhen Lingyi Innovation Tech Co., Ltd. The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01.