Je mya Cn TBT2607GL ul MGI Bluetooth Earbuds
__f
(SB Cable for charging
=i HEMT EU TU Microphone Bluetooth indicator light (Blue Charging indicator light (Red) Next song/volume increase On/OffPlay/Pause/AnswerfEnd Call Previous song/volume decrease Micro USB charging port Siete
- Bluetooth V3.0+ EDR
-Wireless Range: up to 27 FT Tak time: upto 3 hours
~ Music Playback time: upto 25 hours
- Charging time: 1.5 hours
- ADDP music steaming
-Voice prompt
- Advanced 10 mm neodymium driver unit for high qualty sound BAL aah Make sure the mobile device (Mobile phone, tablet, computer, etc) you are trying to pairthe Bluetooth earbuds with supports Bluetooth, Specific pairing procedures may vary depending on the mobile device you are trying to pair with, for detailed information on using the Bluetooth function of our mobile device, please refer to the mobile devices user quide, 1, Power on the earbuds, Press and hold the On/Off button for 2-4 seconds, the Bluetooth indicator light wil begin to alternate Blue/Red this indicates the earbuds are in pairing mode, 2. On your mobile device navigate to Settings Bluetooth and searchyscan for
"Tech2 Pure" (some mobile devices will begin to search automatically) and selectit 3, Some mobile devices may confirm if you want to connect to Tech? Pure"
select"YesorEnter'to complete the paiing process, The Bluetooth earbuds wil automatically reconnect to your mobile device when they are powered on and in Bluetooth range eae tied tLe bs The earbuds can only be connected to one Bluetooth device ata time. To pai the earbuds toa lfferent device (other than the device intially paired with) you must first close he initial Bluetooth connection on the frst device ether by shutting off the Bluetooth function, or ifthe device is out of range, it wl be automatically disconnected, Then proceed to pair with the desired device using the above steps. eV eS When the unit is connected and paired to your device.
-Press Play/Pause/Answer/End Cal/" on the earbuds remote to start playing music OR navigate to the musicapp on your mobile device and select a media file to begin playing.
-Quick Press Next song/volume increase to skip to the next track.
-Quick Press Previous song/volume decrease to go back to the previous track.
-Press & hold+*or*-" for volume control. You can also contro! the volume using the volume controls on your mobile device. For maximum volume output make sure the volume on your mobile device is set to the loudest setting. MAKING AND RECEIVING PHONE CALLS When the unit is connected and paired to your device.
-PressOn/Off/ Play/Pause/Answer/End Call"on the earbuds remote to accept acall,
-Press Play/Pause/Answer/End Call" during a call to end the call.
-Press and hold Play/Pause/Answer/End Call" for 2 seconds to reject an incoming call. To place a call, dial a number or select a contact on your mobile device eG Attach the included Micro USB cable (smaller end) into the Micro USB charging port of the earbuds remote, and plug the ather end of the cable into a USB charger or USB port on your PC. if the battery is completely dead itwil take up to 2 hours to fully charge the device. TheCharging indicator light (Red}"will illuminate when the unitis charging, when charging is complete theCharging indicator light (Red}* will shut off. FCC STATEMENT DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY This device complies with Part 15 of the FCC Rules, Operation Is subject to the following two conditions: (1) this device may not cause harmful Interference, and (2} this device must accept any Interference recelved, Including Interference that may cause undesired operation. Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference in a residential Installation. This equipment generates, uses, and can radiate radio frequency energy, and If net Installed andl used In accordance with the Instructions, may cause harmful interference to radio communications. However, there is no guarartee that interference will not occur ina particular Installation. If this equipment does cause harmful Interference to radio or television reception, which can be determined by tuming the equipment off and on, the user Is encouraged to try and correct the Interference by one or more of the following measures:
+ Reorient or relocate the receiving antenna,
+ Increase the distance between the equipment and the receiver.
+ Connect the equipment to an outleton a clreutt different from that ta which the receiver's, connected.
+ Consult the dealer or an experienced radio/TV techniclan for help, FCC-Caution: Any changes or modifications not expressly approved by the party responsible for compliance could vold the user's authority to operate this equipment. ENE Bayt Home Automation Com, (*Baytt") warrants to the original purchaser of this Tech2 product that the product shall be free of defects in design, assembly, material, or workmanship. Bayft warrants the Tech? product for ane (1) year for devices bought In US. Product Warranty Bayt will repair or replace, at its option and free of charge (except for shipping charges for the product) any defective Tech2 product. Bayft reserves the right to discontinue any of is products without notice, and disclaims any limited warranty to repalr or replace any such discontinued products. In the event that Bayit is unable to repair or replace the product (for example, because It has been discontinued), Baytt will offer elther a refund or a credit toward the purchase of another product in an amount equal to the purchase price of the product as evidenced on the original purchase receiptas discounted by Its natural use o offer a similar product at Baytts discretion. No warranties will be honored Unless the purchaser provides, at purchaser's expense, the product for inspection. No warranties will be honored if Bayit determines that the product has been Improperly Installed, altered in any way, or tampered with. The Bayit Product Warranty daes not protect against acts of God such as flood, lightning, earthquake, war, vandallsm, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low-voltage disturbances (Le. brewmouts or sags), non-authorized program, of system equipment modification or alteration, Baylt reserves the right to review the damaged Tech2 produet. All costs of shipping the Tech2 Product to Baylt for inspection are the sole responsibilty of the purchaser. if Bayit determines, In its sole discretion, that itis impractical to ship the damaged product to Bayit, Bayit may designate, In Its sole discretion, an equipment repair facility to Inspeet and estimate the cost to repalr such product. Any cost of the estimate or shipping the product to and from a repair facility is the purchaser's responsibilty. Damaged product must remain avallable for Inspection ntl the c'aim|s finalized. Whenever cialms are settied, Bay't reserves the right to be subrogated under any existing insurance policles the purchaser may have. THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BAYIT. THERE ARE NO OTHER WARRANTIES, EXPRESSED Of, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND SUCH |AAPLIED WARRANTIES, IF ANY, ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY. Some states do not allow limitations on how long an Implled warranty lasts, 50 the above limitations may not apply to you. IN NO EVENT SHALL BAYIT BE LIABLE FOR INCIDENTAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY BAYIT PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. This warranty gives you specific legal rights, and you may also have other Tights, which may vary from state to state. Some states do not allow the exclusion of limitation of Incidental, consequential, or other damages, so the above limitations may not apply to you. Manufacturer-Dongguan Linpa Electronics Ltd 3F-C, B Building, Qiaojiaozhonglu 178, Shiguqiao, Tangxia County, Dongguan City, China