PBI100 Polaroid Bluetooth Headphone PBT100 | USER MANUAL Questions? CD If you still have questions Need some help? 00 call our help line:
This manual will help you 888 1-877-768-8481 enjoy your new product or visit us at:
www.southerntelecom.com |
Click on Product Support
- Polaroid FCC Part 15:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1 (1) this device may not cause harmful interference, and 1 (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this equipment not expressly approved by the party responsible for 1 compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
e Reorient or relocate the receiving antenna.
' Increase the separation between the equipment and receiver. e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
' Do not attempt to repair or modify this equipment. Shielded USB cables must be used with this unit to ensure compliance with the Class B FCC limits. PLR IP Holdings, LLC, its licensees and affiliates, fully support all electronic waste initiatives. As responsible stewards of the environment, and to avoid violating established laws, you should properly dispose of this product in compliance with all applicable regulations, directives or other governances in the area where you reside. Please 1 check with local authorities or the retailer where you purchased this product to determine a location where you can 1 appropriately dispose of the product.
' Instantly recognizable. Instantly
\ reassuring. The Polaroid Classic Border
' and Polaroid Color Spectrum logos let you
' know you've purchased a product
' that exemplifies the best qualities of our brand and that contribute to our rich heritage of quality and innovation IN THE BOX Bluetooth Headphone 3.5mm Auxiliary Cable eI pcCh Micro USB Cable USING THE HEADPHONES Powering ON/OFF 1.Press and hold the[ button. A tone is heard, indicating that the headphones are powered ON. 2. Press and hold the[ #lbutton for 3 seconds. A tone will be heard to confirm that the headphones are turned OFF. Playing music
* Quick press to pause your music.
* Quick press again to resume music playback. Answering/ending phone calls
* Quick press to answer an incoming phone call.
* Quick press again to end your call. Double press to redial the last outgoing call. Power On/Off Play/Pause Answer/End calls LOCATION OF CONTROLS 1.[+] button
: Quick press to skip to the next track.
| Long press to increase the volume. phone call.
(A tone is heard when the maximum * Quick press again to end your volume level is reached.) call.
: 2.[ >i] button: - Double press to redial the last
; Pressandholdthe[ ]dltton.A outgoing call. tone is heard, indicating that the 3. [-] button:
headphones are powered ON. * Quick press to replay the previous
*Press and holdthe[ ]sdutton for 3 track. seconds. A tone will be heard to - Long press to decrease the confirm that the headphones are volume. turned OFF. (A tone is heard when the minimum volume level is reached.) Answering and ending phone calls
* Quick press to answer an incoming Playing music
*Quick press[ tb pause your music.
' Quick press[ )algain to resume music playback. 4. Micro USB charging port 5. 3.5mm headphone jack 6. Microphone 7. LED indicator light PLAYING MUSIC USING AS WIRED HEADPHONES To enjoy music wirelessly on your Bluetooth headphones, make sure you are 1, Connect one end of the 3.5mm auxiliary cable to the aux jack on
' connected to a Bluetooth-enabled device. Once connected, press the [ ] burton or | the headphones and the other end to an external device's
| press PLAY using the media player on your Bluetooth device. When playback starts, headphone jack (smartphone, tablet or MP3 player.)
' control the music and volume with your connected device or the buttonsonthe = 2, Open a media player on your mobile device and click on PLAY to _ headphones. start playing your music.
! 3. Use the controls on your Bluetooth-enabled device to control music playback and volume. 3.5mm auxillary cable Bluetooth-enabled device
: Headphones = - :
Connecting the auxillary cable will override Bluetooth mode. When the cable is disconnected, the headphones will not automatically reconnect. Press If there are no paired devices in range when the headphones
; are turned on, it will go into pairing mode automatically. To ;
the[ ] buttdin. A tone will be heard and the reconnect, enter your device's Bluetooth settings and select aS Telolafela RUM eeu a OAM ACL oti lo me \Ule etm eseh CHARGING THE HEADPHONES Micro USB charging port on the headphones. charge the device for at least 2 hours before initial use. and turns off when charging is complete. from the headphones.
| Connect the larger end of the Micro i USB charging cable to the USB i port on your computer or other
\ USB charging device. TROUBLESHOOTING 0) 1. Make sure your Bluetooth device supports A2DP profile. 2. Turn up the volume on your Bluetooth device. e the pairing process. feet of each other during the pairing process.
| 3, Press and HOLD the [Pll] button until you hear a tone and the LED indicator light flashes BLUE quickly.
' 4, Check that YOUR device's Bluetooth feature is turned ON.
: 5. Try repeating the pairing process. See Pairing the headphones. 1. Connect the small end of the Micro USB charging cable to the 2. Connect the larger end of the Micro USB charging cable to a USB port on your computer or other USB charging device. Make sure to 3. The LED indicator light is RED when the headphones are charging 4.When charging is complete, remove the Micro USB charging cable Connect the small end of the Micro USB charging cable to the USB port on the headphones. Computer 3. You may have to unpair the headphones, then re-pair to your device. 1. Make sure the Bluetooth headphones are turned OFF before starting 2. Keep your Bluetooth headphones and Bluetooth-enabled device within 3 PAIRING THE HEADPHONES 1.Press and hold the[ #lbutton to turn the headphones on. A tone is heard and the LED indicator light will flash BLUE quickly. Your headphones are now in pairing mode. 2. Turn on your mobile device's Bluetooth function and make it discoverable. (Consult your mobile devices documentation to connect or set up a Bluetooth device.) 3. In discoverable mode, your phone is searching for nearby Bluetooth devices to connect to. When your mobile device finds the Bluetooth headphones, select PBT100 from the list of discovered devices. 4. Some older mobile devices may ask for a password before connecting to a Bluetooth device. Type 0000 or 1234 and press YES or OK to pair the two units. 5. After a successful pairing, a beep will be heard and the LED indicator light will flash BLUE slowly. NOTE: If you would like to connect the headphones to another device, you must unpair the headphones from the currently paired device first. In your device's Bluetooth settings, select PBT100, then select unpair. When the headphones have been unpaired, it automatically goes into pairing mode again. TROUBLESHOOTING (cont'd) Q 1. Make sure the Bluetooth headphones are turned OFF before starting the pairing process. 2. Press and HOLD the [Pll] button until you hear a tone and the LED indicator light quickly flashes BLUE. 3. The headphones are now in pairing mode. f/ . \
settings Bluetooth Bluetooth On Bluetooth & ) Paired devices MY DEVICES QQ) Petioo PBT100 Connected (i) Available devices OTHER DEVICES OY The screenshots above are typical of many Bluetooth-enabled devices in the market today, and are used to assist in the anation of the pairing ace and interaction with process. Your Bluetooth-enabled device the Bluetooth headphones may differ slightly from the illustrations above. WARRANTY This product as supplied and distributed new by AIT, Inc. (AIT) to the original consumer purchaser is warranted by AIT against defects in material and workmanship for a period of one year from your date of purchase (Warranty). In the unlikely event that this product is defective, or does not perform properly, you may within one year from your original date of purchase return it to the authorized service center for repair or exchange. TO OBTAIN WARRANTY SERVICE:
+ Call the Customer Support number located below, or go to our website portal to receive an SRO number.
+ Provide proof of the date of purchase within the package (dated bill of sale).
+ Prepay all shipping costs to the authorized service center, and remember to insure your return. Inabuce a return shipping address (no P.O. Boxes), a telephone contact number, and the defective unit within the package.
+ Describe the defect or reason you are returning the product. Your product will be repaired or replaced, at our option, for the same or similar model of equal value if examination by the service center determines this product is defective. Products received damaged as a result of shipping, will require you to file a claim with the carrier. The shipping address of the authorized service center is:
AIT, Inc. ATTN: Customer Service (2nd Floor) 14-C 53rd Street Brooklyn, NY 11232 IN NO EVENT WILL AIT, ITS MANUFACTURERS, DISTRIBUTORS OR PLR IP HOLDINGS, LLC BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) RELATED TO THIS PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY. Questions? GS If you still have questions, isi
" or visit us at:
Need some help? 200 ) call our help line: www.southerntelecom.com This manual will help you 888 1-877-768-8481 Click on Product Support enjoy your new product