FCC ID: 2BFDGL-PO108C1 Permanent Outdoor Eaves Lights

USER MANUAL V1.0 Thank you for purchasing Lumary products.Ready to get started?Download the Lumary App to manage your devices straight from your phone.Easily connect to your home Wi-Fi and control multiple devices with touching fingertips.Thank you for your support, we will be dedicat-

ed to your service and continue to optimize the applica-

tion and products. The user manual is a general template for app use, the icon and product name as a case demonstration is for reference only, the final is subject to the actual product. The final interpretation right belongs to Lumary. 1 Contents Install the "Lumary" App Troubleshooting Remote Control App functions for you Group Control FAQ Important Information App-To-App Voice Control 3-7 8 9 10-14 15-17 18-19 20-21 22-28 2 Install the "Lumary" App 1. Find and install the "Lumary" App on Apple Store, Google Play. 3 2. Register a Lumary account. Enter your email address. Log into the App. 4 3. Connect NOTE: Lumary products can't connect to 5GHz networks. Steps:

1. Advised to enable Bluetooth,Enable Bluetooth to add some Wi-Fi device easily;

2. Each time the device without distribution network is powered on, confirm the light is breathing or blinking pairing mode;

3. Open the Lumary App,In the top corner of the Devices screen, click ''+'' and select ''Add Device'' to confirm that the device is paired. If not, you need long press button 5s confirm the light is blinking. 4. Find the device, choose Wi-Fi and enter password,press "Next". Click "Add", and wait patiently. After that, click "Done", and the device is successfully added to the App. 5. Other ways to add devices,Open the Lumary App>>In the top corner, click "+">> Choose "Lighting">>Select "Light Source (BLE + Wi-Fi)"

>>Select "AP Mode" or "EZ Mode" in the upper right corner. 5 6 This isn't 5GHz networks. Lumary Permanent Outdoor ... Lumary Permanent Outdoor ... Lumary Permanent Outdoor ... Lumary Permanent Outdoor ... Note:Please select your region and country. 7 4. Troubleshooting 1. Can't connect to your Wi-Fi network. Make sure you entered the correct Wi-Fi password during the Wi-Fi setup. Check whether there are any Internet connection problems. If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again. 2. If you fail to bind, you will need two phones, one to set the hotspot and the other to connect the hotspot and add the device through the app. If the device is successfully added, the device is normal. The problem may be in the router, you need to check your router Settings to see if there are MAC and DHCP restrictions.Lumary products do not support 5GHz networks. 3. If you have any questions.You can contact us via our after-sales email or leave a message on our official social media account. support@lumary.tech support@lumarysmart.com 8 Remote Control ON/OFF Scenes Pause/Play Brightness-

&Scene Speed-

Auto Scenes cycle MODE+

DIM

AUTO DIM

MODE-

Previous Scene Brightness+

&Scene Speed+

Next Scene Red R G B Green Blue Warm White WW CW Cool White The remote control can control both networked and non-networked lights. 1, When the light is not networked & networked, you need to turn off the power of the device for 5 seconds, then turn on the power of the light again and press the on/off button, the light appears to breathe or blink to complete the pairing. 2If the pairing is not successful, please repeat the steps. 9 App functions When you enter the App, you can see five sections: On/Off, Colour, Scene, Music, Plan. Detailed function description please check below:

1.On/Off. Analog key switch, control the switch of the whole set of Eaves lights. Lumary Permanent Outdoor ... Lumary Permanent Outdoor ... 10 2. Colour. After the successful connection, enter this Colour UI page by default. This UI page is with 3 icons and 1 digital display. Lumary Permanent Outdoor ...

Select all colors Individual light control color Individual light control turn off Colors transition 11 3. Scene. It has 44 different scene modeSupports DIY 50+

scenes, edit your favorite scenes .

(Note: When you're done editing, be sure to preview and click Save. Next time you open this page, the DIY scene will also be saved.) 12 4. The music function requires access to the music UI, which recognises external sounds through the phone's MIC, and realises that the rhythm of the light changes along with the sound through the app's algorithm. Tip: If you leave the music rhythm mode, the rhythm will stop. If the phone rests on the screen, the lights will stop. In order not to violate the privacy issue. 13 5. Plan. The owner can freely set the on/off time of the string light every day. 14:45 Lumary Permanent Outdoor ... 14 Group Control 1. Log in to Lumary App, tap the smart device and enter into, click" " in the top right corner. Lumary Permanent Outdoor ... ANGELHALO Perm ... Lumary Perm ... Lumary Perm ... Lumary Perm ... Lumary Perm ... Lumary Perm ... 15 2.Click "Create Group", then select a device and save Lumary Permanent Outdoor ... Lumary Permanent Outdoor ... Lumary Permanent Outdoor ... Lumary Permanent Outdoor ... Lumary Permanent Outdoor ... 16 3.You can reset the group name and save it, and the group can control devices. Lumary Perm ... Lumary Permanent Outdoor ... Lumary Perm ... Lumary Perm ... Lumary Perm ... 17 FAQ 1. Why does the flickering occur with Lumary products?

Lumary's products are factory set to the default network configuration. If the device has not been connected to the network, it will flash for three minutes each time it is powered on. If the device is connected to the network, it will stop flashing and will automatically connect to the network when it is switched off and on via the wall switch after 15 seconds. 2.Can I share with family and friends?

Yes, you can share access to your Lumary devices.In the Lumary App, from your main device list, click on one of the devices press the " " button on the top right and click on "Share Device" to give or revoke sharing permissions. In order to share, the other user should already have downloaded the Lumary App and registered an account. 3.Can I group multiple Lumary devices together?

Yes, you can group multiple same-type devices by room, location, or however else you want.The same devices can be in multiple groups.For example, if you create a group for "Bedroom" and another group for Entire House" ,your Bedroom lights can be included in both groups.From your main device list, click on one of the devices you want to group, press the

"..." button on the top right for advanced settings, and click "Create Group"

.You'll be able to name a new group and choose which devices you'd like to group together. 18 4.How many devices can I control?

The maximum number of timers that can be added to a single device: 30 Maximum number of devices that can be added in a single home: 120 The maximum number of Tap-to-Run that a single home can create: 100 Maximum number of Automation that can be created in a single home: 100 The maximum number of tasks that can be added in a Tap-to-Run: 150 The maximum number of tasks that can be added in an Automation: 150 The maximum number of conditions that can be added in an Automation: 10 The maximum number of mobile devices that can simultaneously log in to an account is: 200 The maximum number of Homes that can be created by a single App account is: 20 The maximum number of home members that can be added in a single home is: 20 The maximum number of rooms that a single home can create is: 20 The maximum number of devices that can be added in a single room is: 50

The maximum number of devices that can be added in a single device group is: 100 The maximum number of device groups that a single home can create is: 20

The maximum number of each device group that can be shared with other users is: 20 The maximum number of each device that can be shared with other users is: 20

The maximum number of each App account that can be invited by other homes is: 20 5.What should I do,when I find a problem with the purchased product?

Please email us (support@lumary.tech) with your Amazon order ID.We are dedicated to ensuring your 100% satisfaction.Rest assured if the problem is with this product, we'll be more than happy to exchange it for a new one immediately. 19 Important Information Troubleshooting Can't connect to your Wi-Fi network. Make sure you entered the correct Wi-Fi password during the Wi-Fi setup. Check whether there are any Internet connection problems.If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again. 20 FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Connect the equipment into an outlet on a circuit different from that to which the receiver Increase the separation between the equipment and receiver. is connected.

- Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. and obtaining a separate FCC authorization. RF Exposure Permanent Outdoor Eaves Lights This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. RF Remote Controller This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment can be used as portable exposure without any restriction. Third-party voice control 22 Work with Alexa 1. Log in to Lumary App, tap the smart device and enter into, click" " in the top right corner. 2.Tap "Alexa" in Third-party Control. 3.Tap "Sign In With Amazon". Lumary smart socket Lumary Permanent Outdoor ... 23 4. Tap"Allow";

5. Linked successfully, when add new device, there is no need to link again, just discover new device in Alexa. 24 To control your Lumary smart device, just ask Alexa. Make sure your devices are already set up using the Lumary app. Things you can say*:

"Alexa, discover my devices."

"Alexa, turn on the bedroom light."

"Alexa, set the bedroom light to orange."

"Alexa, turn off the coffee machine."

"Alexa, set the living room to 50%."

"Alexa, dim porch light."

*Some commands require compatible devices. 25 Work with Google Assistant 1. Log in to Lumary app, tap the smart device and enter into, click " " in the top right corner. 2. Tap "Google Assistant" in Third-party Control. 3. Tap "Link with Google Assistant". Lumary Permanent Outdoor... 26 4. Click"Agree and link";

5. Linked successfully, when add new device, there is no need to link again, just discover new device in Google Home. 27 To control your Lumary smart device, just say

"Hey Google",and ask. Make sure your devices are already set up using the Lumary app. Things you can say*:

"Hey Google, turn on all the lights in my bedroom."

"Hey Google, turn off the light."

"Hey Google, set the bedroom light to orange."

"Hey Google, turn off the coffee machine."

"Hey Google, set the living room to 50%."

"Hey Google, dim porch light."

*Some commands require compatible devices. 28 Can't connect? Need help?

HAVING AN EASY TALK TO US BEFORE YOU RETURN THE PRODUCT WILL FIX A PROBLEM MORE QUICKLY Lumary support:

support@lumary.tech Visit us at:

www.lumary.tech www.lumarysmart.com

Page 1 of 1 FCC ID: 2BFDGL-PO108C1 LABEL AND LOCATION Permanent Outdoor Eaves Lights Model: L-PO108C1 FCC ID: 2BFDGL-PO108C1

(Size: L 4.0cm x W 2.0cm) Label Location Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: webmaster@lcs-cert.com | Web: www.lcs-cert.com Scan code to check authenticity

Shenzhen Liris Lighting Co, Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 4/14/2024 Shenzhen Liris Lighting Co, Ltd. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID:

2BFDGL-PO108C1):

Name and company of U.S. agent:

Physical U.S. address of agent:

FRN of U.S. agent:

Email address of U.S. agent:

FCC US Agent, LLC 3722 Illinois Avenue, Saint Charles, IL, 60174, USA 0033402884 Support@FCCUSAgent.com FCC US Agent, LLC acknowledges their obligation to accept service of process on behalf of Shenzhen Liris Lighting Co, Ltd.. Shenzhen Liris Lighting Co, Ltd. with the FRN 0035103621 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature Kevin Zhang Certification Engineer Shenzhen Liris Lighting Co, Ltd. Signature Tim Payne Manager FCC US Agent, LLC 5 0 V

, U

) 7

) d

1 1 9

. 2 _ t n e g A _ S U

l e d o m

_ 8 4

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products:

FCC ID 2BFDGL-PO108C1 Model name L-PO108C1, L-PO36E1, L-PO72E1, L-PO108E1, L-PO36C1, L-

PO72C1, BYR-OE-ST-36D-15M-24V, BYR-OE-ST-72D-30M-24V, BYR-OE-ST-108D-45M-24V For the products listed above, we request permanent confidentiality for all applicable exhibits as there are:

the Operational Description the Block Diagram the Schematics the Part List the Tune up Procedure The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-04-12 Name / Title: Kevin Zhang / Certification Engineer Company: Shenzhen Liris Lighting Co, Ltd. Address: 5/F, BUILDING B, JINXIANG INDUSTRIAL PARK, GUANCHENG COMMUNITY, GUANHU STREET LONGHUA DISTRICT, SHENZHEN 518110, China Phone: +86-755-27639831 Fax: N/A E-Mail: rd2@liris-lighting.com

Covered Equipment Identification Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(ii) of the Commissions Rules (47 C.F.R.) we attest as follows:

We, applicant Company Name: Shenzhen Liris Lighting Co, Ltd. Address:

5/F, BUILDING B, JINXIANG INDUSTRIAL PARK, GUANCHENG COMMUNITY, GUANHU STREET LONGHUA DISTRICT, SHENZHEN 518110, China Phone: +86-755-27639831 certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-04-12 Name / Title: Kevin Zhang / Certification Engineer Company: Shenzhen Liris Lighting Co, Ltd. Address: 5/F, BUILDING B, JINXIANG INDUSTRIAL PARK, GUANCHENG COMMUNITY, GUANHU STREET LONGHUA DISTRICT, SHENZHEN 518110, China Phone: +86-755-27639831 Fax: N/A E-Mail: rd2@liris-lighting.com

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commissions Rules (47 C.F.R.) we attest as follows for the product listed below:

FCC ID 2BFDGL-PO108C1 Model name L-PO108C1, L-PO36E1, L-PO72E1, L-PO108E1, L-

PO36C1, L-PO72C1, BYR-OE-ST-36D-15M-24V, BYR-

OE-ST-72D-30M-24V, BYR-OE-ST-108D-45M-24V We, applicant Company Name: Shenzhen Liris Lighting Co, Ltd. Address:

5/F, BUILDING B, JINXIANG INDUSTRIAL PARK, GUANCHENG COMMUNITY, GUANHU STREET LONGHUA DISTRICT, SHENZHEN 518110, China Phone: +86-755-27639831 certify that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-04-12 Name / Title: Kevin Zhang / Certification Engineer Company: Shenzhen Liris Lighting Co, Ltd. Address: 5/F, BUILDING B, JINXIANG INDUSTRIAL PARK, GUANCHENG COMMUNITY, GUANHU STREET LONGHUA DISTRICT, SHENZHEN 518110, China Phone: +86-755-27639831 Fax: N/A E-Mail: rd2@liris-lighting.com

Shenzhen Liris Lighting Co, Ltd. WIFI Channel 12 and 13 Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for FCC ID: 2BFDGL-PO108C1 Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However, all the operated channels cant be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note:

1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo-

location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following:

Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code

(MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source. Name / Title: Kevin Zhang / Certification Engineer Signature:

Phone: +86-755-27639831 Email: rd2@liris-lighting.com Date: 2024-04-12 Page 1 of 1 Rev.2.0

Shenzhen Liris Lighting Co, Ltd. 5/F, BUILDING B, JINXIANG INDUSTRIAL PARK, GUANCHENG COMMUNITY, GUANHU STREET LONGHUA DISTRICT, SHENZHEN 518110, China Date: April 12, 2024 FCC ID: 2BFDGL-PO108C1 Model Number: L-PO108C1, L-PO36E1, L-PO72E1, L-PO108E1, L-PO36C1, L-PO72C1, BYR-OE-ST-36D-15M-24V, BYR-OE-ST-72D-30M-24V, BYR-OE-ST-108D-45M-24V To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, Shenzhen Liris Lighting Co, Ltd. hereby declare that our product (Permanent Outdoor Eaves Lights) Model Number: L-PO108C1, L-PO36E1, L-PO72E1, L-PO108E1, L-PO36C1, L-PO72C1, BYR-OE-ST-36D-15M-24V, BYR-OE-ST-72D-30M-24V, BYR-OE-

ST-108D-45M-24V board, Schematic, Hardware version, Software version, structure and internal photos are same, named differently due to marketing purposes. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely,

(Signed) Name/Title: Kevin Zhang / Certification Engineer Company: Shenzhen Liris Lighting Co, Ltd. Address: 5/F, BUILDING B, JINXIANG INDUSTRIAL PARK, GUANCHENG COMMUNITY, GUANHU STREET LONGHUA DISTRICT, SHENZHEN 518110, China Tel: +86-755-27639831 Fax: N/A E-Mail: rd2@liris-lighting.com