Car Fast Wireless Charger USER MANUAL Please read the instructions carefully before using. Pictures are for reference only, Specifications are subject to the physical product What is included:
Features:
Parameters:
Parameters:
Product specication:
Attentions:
Infrared Sensor Wireless Charger Holder X 1 Air vent mount X 1 Air vent mount X 1 USB cable X 1 Car holder with wireless charging fuction, charges your phone conveniently when driving. Advanced infrared sensor system, automatically open and clamp your phone onto the mount. Power output 5W/7.5W/10W, compatible with all phones with QI standard. Full 360 degrees rotation for perfect viewing angle. Start charging once as the phone contact with the holder, no need cable anymore. Fix foot support to t any size of phone, much convenient for use. Compatible devices:
Work well with:
Samsung Note 8, Note 9, iPhone XS MAS, Huawei P30 Pro, MIUI9, Samsung S10+, iPhone 8PLus, Samsung S9+, Samsung S8+, iPhone XR, Samsung S10, Samsung S7edge, Samsung S8, iPhone XS, iPhone X, Samsung S9, iPhone 8 Also work with all other Qi enabled devices. Qi disabled devices with wireless receiver or wireless charging case. Require receiver compliant with WPC Qi standard to match). Infrared Sensor Wireless Charger Holder Transmitter coil Infrared Sensor Air vent mount There are three levels of locking for dierent size AC vent blades. Support foot Clamp arms Touch switch Micro USB port Wireless holder Input voltage Input current Output power Frequency DC 5V/9V 2A 5W / 7.5W / 10W 115-205KHZ QC 3.0 car charger Input voltage Output Current DC 12-24V 5V 3A, 9V 2A, 12V 1.5A LED Mode:
Working state Power transfer LED light color Red,blue,red blue light turn on by turns for once,then o Standby mode Charging FOD Warning Charge complete Light o Red light keeps on Red light keeps ashing Red light keeps on Please use the product correctly according to instructions Please do not disassemble the product or throw it to re and water, to avoid leakage caused by electrical short circuit Please do not use wireless charger in high temperature, wet, corrosive environment, to avoid leakage from caused by damaged circuit Please do not put wireless charger close to cards with magnetic stripes or chips (ID card, credit card etc.) to avoid demagnetization Please keep wireless charger at least 20 CM distance away from implantable medical device
(heart pacemaker, Implantable cochlea etc.) to avoid potential interferences Please do safekeeping, do not let your kids treat wireless charger as toy to avoid unwanted accidents The pictures only supplies the reference, please take the actual product as the standard Attentions:
Attentions:
Attentions:
Attentions:
Attentions:
Attentions:
1. Insert the adjuster into the ball joint adapter. 4. Connect the cable micro head to your charge holder. 7. After the phone has been placed in the holder, the clamps close automatically and start charging. 1. Insert the adjuster into the ball joint adapter. 4. Connect the cable micro head to your charge holder. 7. After the phone has been placed in the holder, the clamps close automatically and start charging. 2. Insert the ball into the socket at the back of bracket and tighten. 5. Connect the other end to car charger, then insert the car charger to car cigar lighter. Touch 8. The clamps will open when you touch induction area in the backside. 2. Insert the ball into the socket at the back of bracket and tighten. 5. Connect the other end to car charger, then insert the car charger to car cigar lighter. 3. Insert the mount directly into the car air vent blade, set the locking switch to proper position. 6. The holder clamps will open automatically when the phone is near 2-3 inches from the infrared sensor. 9. The clamps close automatically. 3. Insert the mount into car air vent blade and turning nut to lock. 6. The holder clamps will open automatically when the phone is near 2-3 inches from the infrared sensor. Touch 8. The clamps will open when you touch the touch sensitive swtich in side edge, take your phone away. 9. The clamps close automatically. FCC Warning:
This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.