Play Decrease the volume: Press and hold the "-" button to decrease the volume and when the volume is reduced to a minimum make "Dong" sound. Increase the volume: Press and hold the "+" button to increase the volume and when the volume is increased to a maximum make "Dong" sound. Phone Call Answer
(Automatic or Manual Answer) 1.Call answer: When the phone comes in, you can dial the number and answer it automatically, or just press the button to answer it. 2.Refuse call answer: Press the button for 2-3 seconds. 3.Automatic/Manual Answer: Before connecting the phone to Bluetooth, hold down the volume "+" button and the volume
"-" button at the same time to switch between automatic and manual answer. Short press three times to start the smart voice assistant to make calls The phone support two simultaneous pairing First pair the phone 1 with the Helmet Headset and then disconnect the phone 1's Bluetooth;
After pairing the Helmet Headset with mobile phone 2, open the Bluetooth of mobile phone 1 and click connect BT30 to connect two mobile phones at the same time;
Now phone 1 and phone 2 paired with Helmet Headset together and support to answer any call from two phones
(Note: phone1 and phone 2 can not answer calls at the same time.) It can automatically answer a call after the number is announced Treble and bass Settings:
Please press and hold + button or " - " button to increase or decrease the volume (If you think it is not easy to control the volume on the Bluetooth headset, you also can adjust the volume on your phone to achieve what you want.) Switch between Chinese and English The Helmet Bluetooth Headset language is English by default. If you want to switch languages please turn on the headset first without connect to Bluetooth, and then press the power on button twice to switch the language. Accessories 1* Helmet Headphone 2* Detachable Clip 1* USB Cable 1* User Manual If you have any questions during the use of our product, please feel free to contact us via seller center. If technical support is required, please contact : www.jzaq.com Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Statement:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF exposure compliance statement:
This device has been evaluated to meet the general RF exposure requirement