Cover Page Global United Technology Services Co., Ltd. Report No.: GTS201906000065F01 FCC REPORT Applicant:
Shenzhen Macross Industrial Co., Ltd. Address of Applicant:
6rd floor,#7 Building,Jianghao Technology Park #430 Jihua Rd.Bantian St.Longgang District, Shenzhen, Guangdong, China Manufacturer/Factory:
Shenzhen Macross Industrial Co., Ltd. Address of Manufacturer/Factory:
6rd floor,#7 Building,Jianghao Technology Park #430 Jihua Rd.Bantian St.Longgang District, Shenzhen, Guangdong, China Equipment Under Test (EUT) Product Name:
Wireless Solar Drivway Alarm Model No.:
Receiver:HS-002A Transmitter:HS-002B Trade Mark:
HOSMART, EMACROS FCC ID:
2AJEM-HS002 Applicable standards:
FCC CFR Title 47 Part 15 Subpart C Section 15.231 Date of sample receipt: June 06, 2019 Date of Test:
June 10-27, 2019 Date of report issued:
June 28, 2019 Test Result :
PASS *
*
In the configuration tested, the EUT complied with the standards specified above. Authorized Signature:
Robinson Lo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 23 2 Version Report No.: GTS201906000065F01 Version No. Date 01 June 28, 2019 Description Original Prepared By:
Date:
June 28, 2019 Check By:
Project Engineer Date:
June 28, 2019 Reviewer Global United Technology Services Co., Ltd. No. 301-309, 3/F., Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 23 3 Contents Report No.: GTS201906000065F01 Page 1 2 3 4 COVER PAGE .......................................................................................................................................... 1 VERSION .................................................................................................................................................. 2 CONTENTS .............................................................................................................................................. 3 TEST SUMMARY ..................................................................................................................................... 4 4.1 MEASUREMENT UNCERTAINTY ............................................................................................................ 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 5.2 5.3 5.4 5.5 5.6 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 TEST MODE ........................................................................................................................................ 6 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 6 TEST FACILITY .................................................................................................................................... 6 TEST LOCATION ................................................................................................................................. 6 OTHER INFORMATION REQUESTED BY THE CUSTOMER ......................................................................... 6 TEST INSTRUMENTS LIST ..................................................................................................................... 7 TEST RESULTS AND MEASUREMENT DATA ...................................................................................... 9 7.1 7.2 7.3 7.4 7.5 7.6 ANTENNA REQUIREMENT .................................................................................................................... 9 CONDUCTED EMISSIONS ................................................................................................................... 10 RADIATED EMISSION METHOD ........................................................................................................... 13 7.3.1 Field Strength of The Fundamental Signal ................................................................................ 15 7.3.2 Spurious Emissions ................................................................................................................... 16 20DB OCCUPY BANDWIDTH .............................................................................................................. 19 DWELL TIME ..................................................................................................................................... 20 DUTY CYCLE .................................................................................................................................... 21 TEST SETUP PHOTO ............................................................................................................................ 23 EUT CONSTRUCTIONAL DETAILS ..................................................................................................... 23 6 7 8 9 Global United Technology Services Co., Ltd. No. 301-309, 3/F., Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 23 Report No.: GTS201906000065F01 4 Test Summary Test Item Section in CFR 47 Result Antenna Requirement Conduction Emission 15.203 15.207 Field strength of the Fundamental Signal 15.231 (b) Spurious Emissions 15.231 (b)/15.209 20dB Bandwidth Dwell Time 15.231 (c) 15.231 (a)(2) Pass: The EUT complies with the essential requirements in the standard. Pass Pass Pass Pass Pass Pass 4.1 Measurement Uncertainty Test Item Frequency Range Measurement Uncertainty Notes Radiated Emission 9kHz ~ 30MHz Radiated Emission 30MHz ~ 1000MHz Radiated Emission 1GHz ~ 26.5GHz AC Power Line Conducted Emission 0.15MHz ~ 30MHz 4.64dB 4.64dB 3.68dB 3.44dB
(1)
(1)
(1)
(1) Note (1): The measurement uncertainty is for coverage factor of k=2 and a level of confidence of 95%. Global United Technology Services Co., Ltd. No. 301-309, 3/F., Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 4 of 23 Report No.: GTS201906000065F01 5 General Information 5.1 General Description of EUT Product Name:
Wireless Solar Drivway Alarm Model No.:
Serial No.:
Hardware Version:
Software Version:
Receiver:HS-002A Transmitter:HS-002B 041434 HS-002 Ver. A HS-002 Ver.01 Test sample(s) ID:
GTS201906000065-1 Sample(s) Status:
Engineer sample Operation Frequency:
433.93MHz Channel Number 1 channel Modulation technology:
FSK Antenna Type:
Antenna gain:
Power supply:
Integral antenna 0dBi(declare by applicant) AC/DC Adapter :
Model: JHD-AP006U-050100BB-2 Input: AC 100-240V, 50/60Hz, 0.2A Output: DC 5V, 1000mA Or RX: DC 6V(4*1.5V, SIZEAA) TX: Battery DV 3.7V, 8.14Wh, 2200mAh Note: The test report is for Transmitter:HS-002B Global United Technology Services Co., Ltd. No. 301-309, 3/F., Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 5 of 23 Report No.: GTS201906000065F01 5.2 Test mode Transmitting mode Keep the EUT in transmitting mode. Per-test mode. We have verified the construction and function in typical operation, The EUT was placed on three different polar directions; i.e. X axis, Y axis, Z axis. which only the worst case was shown in this test report and defined as follows:
433.93MHz Axis Field Strength(dBuV/m) X 83.50 5.3 Description of Support Units None. 5.4 Test Facility Y 85.29 Z 84.16 The test facility is recognized, certified, or accredited by the following organizations:
FCC Registration No.: 381383 Global United Technology Services Co., Ltd., Shenzhen EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in files. Registration 381383. Industry Canada (IC) Registration No.: 9079A-2 The 3m Semi-anechoic chamber of Global United Technology Services Co., Ltd. has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 9079A-2. NVLAP (LAB CODE:600179-0) Global United Technology Services Co., Ltd., is accredited by the National Voluntary Laboratory Accreditation Program (NVLAP). LAB CODE:600179-0 5.5 Test Location All tests were performed at:
Global United Technology Services Co., Ltd. No. 301-309, 3/F., Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Tel: 0755-27798480 Fax: 0755-27798960 5.6 Other Information Requested by the Customer None. Global United Technology Services Co., Ltd. No. 301-309, 3/F., Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 6 of 23 6 Test Instruments list Radiated Emission:
Report No.: GTS201906000065F01 Item Test Equipment Manufacturer Model No. Inventory Cal.Date No.
(mm-dd-yy) Cal.Due date
(mm-dd-yy) 1 2 3 4 5 3m Semi- Anechoic Chamber Control Room EMI Test Receiver BiConiLog Antenna Double -ridged waveguide horn Horn Antenna EMI Test Software 6 7 8 9 10 11 12 Amplifier(100kHz-3GHz) 13 Amplifier(2GHz-20GHz) Coaxial Cable Coaxial Cable Coaxial cable Coaxial Cable ZhongYu Electron 9.2(L)*6.2(W)* 6.4(H) GTS250 July. 03 2015 July. 02 2020 ZhongYu Electron Rohde & Schwarz SCHWARZBECK MESS-ELEKTRONIK SCHWARZBECK MESS-ELEKTRONIK 6.2(L)*2.5(W)* 2.4(H) GTS251 GTS203 ESU26 N/A N/A June. 26 2019 June. 25 2020 VULB9163 GTS214 June. 26 2019 June. 25 2020 BBHA 9120 D GTS208 June. 26 2019 June. 25 2020 ETS-LINDGREN 3160 GTS217 June. 26 2019 June. 25 2020 AUDIX GTS GTS GTS GTS HP HP E3 N/A N/A N/A N/A 8347A 84722A AFS33-18002 650-30-8P-44 N/A GTS213 GTS211 GTS210 GTS212 GTS204 GTS206 N/A N/A June. 26 2019 June. 25 2020 June. 26 2019 June. 25 2020 June. 26 2019 June. 25 2020 June. 26 2019 June. 25 2020 June. 26 2019 June. 25 2020 June. 26 2019 June. 25 2020 GTS218 June. 26 2019 June. 25 2020 14 Amplifier (18-26GHz) Rohde & Schwarz 15 16 17 18 19 20 21 22 23 24 Band filter Amindeon 82346 GTS219 June. 26 2019 June. 25 2020 Power Meter Power Sensor Wideband Radio Communication Tester Splitter Loop Antenna Breitband hornantenne Amplifier Amplifier PSA Series Spectrum Analyzer Anritsu Anritsu ML2495A MA2411B GTS540 GTS541 June. 26 2019 June. 25 2020 June. 26 2019 June. 25 2020 Rohde & Schwarz CMW500 GTS575 June. 26 2019 June. 25 2020 Agilent ZHINAN 11636B ZN30900A GTS237 GTS534 June. 26 2019 June. 25 2020 June. 26 2019 June. 25 2020 SCHWARZBECK BBHA 9170 GTS579 Oct. 20 2018 Oct. 19 2019 TDK TDK PA-02-02 PA-02-03 GTS574 GTS576 Oct. 20 2018 Oct. 19 2019 Oct. 20 2018 Oct. 19 2019 Rohde & Schwarz FSP GTS578 June. 26 2019 June. 25 2020 Global United Technology Services Co., Ltd. No. 301-309, 3/F., Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 7 of 23 Report No.: GTS201906000065F01 Conducted Emission Item Test Equipment Manufacturer Model No. Inventory Cal.Date Cal.Due date No.
(mm-dd-yy)
(mm-dd-yy) 1 2 3 4 5 6 7 8 9 Shielding Room ZhongYu Electron 7.3(L)x3.1(W)x2.9(H) GTS252 May.15 2019 May.14 2022 EMI Test Receiver R&S Coaxial Switch ANRITSU CORP ESCI 7 MP59B GTS552 June. 26 2019 June. 25 2020 GTS225 June. 26 2019 June. 25 2020 Artificial Mains Network Coaxial Cable EMI Test Software Thermo meter Absorbing clamp SCHWARZBECK MESS GTS AUDIX KTJ Elektronik-
Feinmechanik NSLK8127 GTS226 June. 26 2019 June. 25 2020 N/A E3 GTS227 June. 26 2019 June. 25 2020 N/A N/A N/A TA328 GTS233 June. 26 2019 June. 25 2020 MDS21 GTS229 June. 26 2019 June. 25 2020 ISN SCHWARZBECK NTFM 8158 GTD565 June. 26 2019 June. 25 2020 General used equipment:
Item Test Equipment Manufacturer Model No. Inventory No. Cal.Date
(mm-dd-yy) Cal.Due date
(mm-dd-yy) 1 2 Humidity/ Temperature Indicator KTJ TA328 GTS243 June. 26 2019 June. 25 2020 Barometer ChangChun DYM3 GTS255 June. 26 2019 June. 25 2020 Global United Technology Services Co., Ltd. No. 301-309, 3/F., Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 8 of 23 7 7.1 Antenna Requirement Test results and Measurement Data Standard requirement:
FCC Part15 C Section 15.203 15.203 requirement:
Report No.: GTS201906000065F01 An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. EUT Antenna:
The antenna is Integral antenna, the best case gain of the antenna is 0dBi, reference to the appendix II for details Global United Technology Services Co., Ltd. No. 301-309, 3/F., Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 9 of 23 7.2 Conducted Emissions Test Requirement:
FCC Part15 C Section 15.207 Test Method:
ANSI C63.10:2013 Test Frequency Range:
150KHz to 30MHz Report No.: GTS201906000065F01 Class / Severity:
Receiver setup:
Limit:
Test setup:
Class B Class B RBW=9KHz, VBW=30KHz, Sweep time=auto Frequency range (MHz) 0.15-0.5 0.5-5 5-30 Limit (dBuV) Quasi-peak 66 to 56*
56 60 Average 56 to 46*
46 50
* Decreases with the logarithm of the frequency. Test procedure:
1. The EUT and simulators are connected to the main power through a line impedance stabilization network (L.I.S.N.). This provides a 50ohm/50uH coupling impedance for the measuring equipment. 2. The peripheral devices are also connected to the main power through a LISN that provides a 50ohm/50uH coupling impedance with 50ohm termination. (Please refer to the block diagram of the test setup and photographs). 3. Both sides of A.C. line are checked for maximum conducted interference. In order to find the maximum emission, the relative positions of equipment and all of the interface cables must be changed according to ANSI C63.10: 2013 on conducted measurement. Test Instruments:
Refer to section 6.0 for details Test mode:
Refer to section 5.2 for details Test environment:
Temp.:
25 C Humid.:
52%
Press.:
1012mbar Test voltage:
Test results:
AC 120V, 60Hz Pass Global United Technology Services Co., Ltd. No. 301-309, 3/F., Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 10 of 23 Measurement data Line:
Report No.: GTS201906000065F01 Global United Technology Services Co., Ltd. No. 301-309, 3/F., Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 11 of 23 Neutral:
Report No.: GTS201906000065F01 Notes:
1. An initial pre-scan was performed on the line and neutral lines with peak detector. 2. Quasi-Peak and Average measurement were performed at the frequencies with maximized peak emission. 3. Final Level =Receiver Read level + LISN Factor + Cable Loss 4. If the average limit is met when using a quasi-peak detector receiver, the EUT shall be deemed to meet both limits and measurement with the average detector receiver is unnecessary. Global United Technology Services Co., Ltd. No. 301-309, 3/F., Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 12 of 23 7.3 Radiated Emission Method Report No.: GTS201906000065F01 Test Requirement:
FCC Part15 C Section 15.231 (b)& Section 15.209 Test Method:
ANSI C63.10:2013 Test Frequency Range:
9kHz to 5000MHz Test site:
Receiver setup:
Limit:
(Field strength of the fundamental signal) Limit:
(Spurious Emissions) Measurement Distance: 3m Frequency Detector RBW VBW Value 9KHz-150KHz Quasi-peak 200Hz 600Hz Quasi-peak 150KHz-30MHz Quasi-peak 9KHz 30KHz Quasi-peak 30MHz-1GHz Quasi-peak 120KHz 300KHz Quasi-peak Above 1GHz Peak Peak 1MHz 1MHz 3MHz 10Hz Peak Average Frequency Limit (dBuV/m @3m) Remark 433.93MHz 100.83 80.83 Fundamental Frequency
(MHz) 40.66-40.70 70-130 130-174 174-260 260-470 Above 470 Frequency
(MHz) Above 1000 Peak Value Average Value Field Strength of Unwanted Emissions
(microvolts/meter) 100 50 Field Strength of fundamental
(microvolts/meter) 1,000 500 500 to 1,500**
50 to 1,50**
1,500 1,50 1,500 to 5,000**
1,50 to 5,00**
5,000 5,00 Class B(dBuV/m @3m) Peak 74 Average 54 Or The maximum permitted unwanted emission level is 20 dB below the maximum permitted fundamental level whichever limit permits a higher field strength. Test setup:
Below 30MHz Below 1GHz Global United Technology Services Co., Ltd. No. 301-309, 3/F., Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 13 of 23 Above 1GHz Report No.: GTS201906000065F01 Test Procedure:
1. The EUT was placed on the top of a rotating table (0.8 meters for below 1GHz and 1.5 meters for above 1GHz) above the ground at a 3 meter camber. The table was rotated 360 degrees to determine the position of the highest radiation. 2. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. 3. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. 4. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rota table was turned from 0 degrees to 360 degrees to find the maximum reading. 5. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. 6. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. Test Instruments:
Refer to section 6.0 for details Test mode:
Test voltage:
Test results:
Refer to section 5.2 for details AC 120V, 60Hz Pass Global United Technology Services Co., Ltd. No. 301-309, 3/F., Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 14 of 23 Measurement data:
7.3.1 Field Strength of The Fundamental Signal Report No.: GTS201906000065F01 Peak value:
Frequency
(MHz) Read Level
(dBuV) Antenna Factor
(dB/m) Cable Loss
(dB) Preamp Factor
(dB) Level
(dBuV/m) Limit Line
(dBuV/m) Over Limit
(dB) polarization 433.93 89.14 17.53 3.02 29.43 80.26 100.83
-20.57 Horizontal 433.93 94.17 17.53 3.02 29.43 85.29 100.83
-15.54 Vertical Average value:
Frequency
(MHz) Peak Value
(dBuV/m) Duty cycle factor 433.93 433.93 80.26 85.29
-8.67
-8.67 Average value
(dBuV/m) 71.59 76.62 Limit Line
(dBuV/m) Over Limit
(dB) Polarization 80.83 80.83
-9.24
-4.21 Horizontal Vertical Remarks:
1. Final Level =Receiver Read level + Antenna Factor + Cable Loss Preamplifier Factor 2. Average value=Peak value + Duty cycle factor Global United Technology Services Co., Ltd. No. 301-309, 3/F., Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 15 of 23 7.3.2 Spurious Emissions Measurement data:
9 kHz ~ 30 MHz Report No.: GTS201906000065F01 The low frequency, which started from 9 kHz to 30 MHz, was pre-scanned and the result which was 20 dB lower than the limit line per 15.31(o) was not reported. Below 1GHz:
Mode:
Transmitting mode Temp./Hum.(%H):
26/56%RH Test by:
Polarziation:
Bill Horizontal Average value:
Frequency
(MHz) Peak Level
(dBuV/m) 867.860 62.30 Duty cycle factor
-8.67 Average value
(dBuV/m) 53.63 Limit Line
(dBuV/m) Over Limit
(dB) Polarization 60.83
-7.20 Horizontal Global United Technology Services Co., Ltd. No. 301-309, 3/F., Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 16 of 23 Mode:
Transmitting mode Temp./Hum.(%H):
26/56%RH Test by:
Polarziation:
Bill Vertical Report No.: GTS201906000065F01 Average value:
Frequency
(MHz) Peak Level
(dBuV/m) 867.860 64.81 Duty cycle factor
-8.67 Average value
(dBuV/m) 56.14 Limit Line
(dBuV/m) 60.83 Over Limit
(dB)
-4.69 Polarization Vertical Global United Technology Services Co., Ltd. No. 301-309, 3/F., Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 17 of 23 Above 1G:
Peak value:
Frequency
(MHz) 1735.72 2169.65 2603.58 1735.72 2169.65 2603.58 Read Level
(dBuV) 61.49 55.81 54.08 60.21 55.51 53.69 Antenna Factor
(dB/m) 25.05 27.74 27.82 25.05 27.74 27.82 Cable Loss
(dB) 4.82 5.15 5.58 4.82 5.15 5.58 Average value:
Frequency Level Duty cycle
(MHz)
(dBuV/m) factor 1735.72 2169.65 2603.58 1735.72 2169.65 2603.58 57.36 54.43 53.70 56.08 54.13 53.31
-8.67
-8.67
-8.67
-8.67
-8.67
-8.67 Report No.: GTS201906000065F01 Preamp Factor
(dB) 34.00 34.27 33.78 34.00 34.27 33.78 Average value
(dBuV/m) 48.69 45.76 45.03 47.41 45.46 44.64 Level
(dBuV/m) Limit Line
(dBuV/m) 57.36 54.43 53.70 56.08 54.13 53.31 74.00 74.00 74.00 74.00 74.00 74.00 Over Limit
(dB)
-16.64
-19.57
-20.30 Polarization Vertical Vertical Vertical
-17.92 Horizontal
-19.87 Horizontal
-20.69 Horizontal Limit Line
(dBuV/m) 54.00 54.00 54.00 54.00 54.00 54.00 Over Limit
(dB)
-5.31
-8.24
-8.97
-6.59
-8.54
-9.36 Polarization Vertical Vertical Vertical Horizontal Horizontal Horizontal Remarks:
1. Final Level =Receiver Read level + Antenna Factor + Cable Loss Preamplifier Factor 2. Average value=Peak value + Duty cycle factor Global United Technology Services Co., Ltd. No. 301-309, 3/F., Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 18 of 23 7.4 20dB Occupy Bandwidth Report No.: GTS201906000065F01 Test Requirement:
FCC Part15 C Section 15.231 (c) Test Method:
ANSI C63.10:2013 Limit:
Test setup:
The bandwidth of the emission shall be no wider than 0.25% of the center frequency for devices operating above 70 MHz and below 900MHz. For devices operating above 900 MHz, the emission shall be no wider than 0.5% of the center frequency. Bandwidth is determined at the points 20 dB down from the modulated carrier. Test Instruments:
Refer to section 6.0 for details Test mode:
Test results:
Measurement Data Refer to section 5.2 for details Pass Test Frequency (MHz) 20dB bandwidth (MHz) Limit (MHz) 433.93 0.0339 1.085 Result Pass Note: Limit= Fundamental frequency0.25%
433.930.25%=1.085MHz Test plot as follows:
Global United Technology Services Co., Ltd. No. 301-309, 3/F., Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 19 of 23 Report No.: GTS201906000065F01 7.5 Dwell Time Test Requirement:
Test Method:
FCC Part15 C Section 15.231 (a)(2) ANSI C63.10:2013 Receiver setup:
RBW=100KHz, VBW=300KHz, span=0Hz, detector: Peak Limit:
Test setup:
Not more than 5 seconds Test Instruments:
Refer to section 6.0 for details Test mode:
Test results:
Refer to section 5.2 for details Pass Measurement data:
Frequency
(MHz) 433.93 Duration of each TX
(second) 0.6 Limit
(second)
<5.0 Result Pass Test plot as follows:
Global United Technology Services Co., Ltd. No. 301-309, 3/F., Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 20 of 23 Report No.: GTS201906000065F01 7.6 Duty Cycle Test Requirement:
FCC Part15 C Section 15.231 Test Method:
ANSI C63.10:2013 Receiver setup:
RBW=100KHz, VBW=300KHz, span=0Hz, detector: Peak Limit:
Test Procedure:
Test setup:
No dedicated limit specified in the Rules. 1. Place the EUT on the table and set it in transmitting mode. 2. Remove the antenna from the EUT and then connect a low loss RF cable from the antenna port to the spectrum analyzer. 3. Set centre frequency of spectrum analyzer=operating frequency. 4. Set the spectrum analyzer as RBW=100kHz, VBW=100KHz, Span=0Hz, Adjust Sweep=100ms to obtain the worst-case pulse on time 5. Repeat above procedures until all frequency measured was complete. Test Instruments:
Refer to section 6.0 for details Test mode:
Test results:
Refer to section 5.2 for details Pass Measurement data:
Calculate Formula:
Duty cycle factor =20 log(Duty cycle) Duty cycle=on time/0.1 seconds or period, whichever is less Test data:
T on time 1.175X11+0.3667X14=18.0588(ms) T period =49(ms) Duty cycle=18.0588/49=36.85%
Duty cycle factor =20 log(0.3685)=-8.67 Global United Technology Services Co., Ltd. No. 301-309, 3/F., Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 21 of 23 Test plot as follows:
Report No.: GTS201906000065F01 Global United Technology Services Co., Ltd. No. 301-309, 3/F., Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 22 of 23 8 Test Setup Photo Reference to the appendix I for details. 9 EUT Constructional Details Reference to the appendix II for details.
------ End ------
Report No.: GTS201906000065F01 Global United Technology Services Co., Ltd. No. 301-309, 3/F., Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 23 of 23