T6 True Wireless Stereo Earphone Basic Specifications & User Manual
---Touch Version 20191009 Earphone Basic Specifications Size: single-earphone 23.616.323.7mm Weight:4.3gsingle-earphone Charging port: magnetic type Keys: 1 (MFB touch button) Charge indicator: Flashing blue LED light (Charging) / light off (Charging completed) Battery :Lithium-ion Polymer rechargeable battery, 501015 , 50mAh TWS Earphone Charging Current:100mA Earphone Charging time: 1.5 hours Working Voltage: 3.3V~4.2V Standby time: about 40 hours Battery and Power Earphone with Charging case:
Music Time:18 hours Talking Time:18 hours Earphone(single charge):
Music Time:6 hours Talking Time:6 hours Working time of main earphone in the state of two earphones:4 Hours Bluetooth version: Bluetooth 5.0 Bluetooth chip: AC6936D Support Profile: HSP, HFP, A2DP, AVRCP 1 / 5 The remote control to speaker: MFB (Play/Pause/Stop);Vol+/ Next song, Vol-/ Previous song Paring name: T6 Pass: 0000 RF transmit: class 2 RF input impedance: 50ohm Receive sensitivity: -89dBm Transmission Range (Hz): 2.40GHz ~ 2.48GHz Transmission distance: 10m TWS function: after two headsets pair and connect, they can work as true wireless stereo headset Audio sampling accuracy: 16bits Audio encoding format: CVSDmSBCSBC SNR: >95dB Working temperature: -15+60 Working humidity: 10%~85%( in a non-frozen state) Speaker Speaker specifications / mode: 9mm Impedance: 16/ typ Frequency(Hz): 20Hz20KHz Sensitivity: 953dB Input Power: 2 mW ( normal), 5mW ( maximum) MIC MIC type: silicon MIC MIC sensitivity: -423dB SPL130dB Basic Specifications of Charging Case Size: 64.45x39.71x24.43mm Weight:30.6g Charging Port: Micro USB Charging LED indicator/charging completed indicator: Blink blue/ lighting 4 Lights Charging base(Full) provide power to earphone: 2 times Battery: Lithium-ion Polymer rechargeable battery,702030 , 400mAh 2 / 5 Charging time : 2 hrs Input Voltage :DC5V Charging current:330mA Output Voltage:DC5V Discharge current:100mA Working temperature: -15+60 Working humidity: 10%~85%( in a non-frozen state) Operating Instructions Bluetooth pairing 1. Both earphones in the charging case(earphones connected automatically in the case),open the charging case,earphones enter into pairing mode;
2. Activate Bluetooth connection on your device and select T6, with Connected after successfully connected;
Music and calls Play/Pause Previous Song Next Song Volume +
Volume -
Answer/End a call X1 X1 X2 Touch and hold Left earphone (L) Right earphone (R) X1 X2 Touch and hold X1 Reject call Touch and hold for 3 seconds Touch and hold for 3 seconds Voice assistant X3
*All calls will be heard in both earphones .
*All the above function are for touch operations. Charging Charging the earphones Place the earphones in the charging case,ensure the charging case is completely closed,the earphones will automatically shut down and start charging . Earphone status lights 3 / 5 Charging Full charge Pairing Charging the case Flashing blue light Light off Blink blue light Connect an adapter with 5V output voltage (compatible) with a Micro USB cable. Case status lights Charging Full charge Notes:
Flashing blue light Steady blue light It will turn off automatically after 5 minutes if without any connection with mobile phone when it turns on. Pairing time: 3 minutes. It will quit the pairing mode automatically after 3 minutes if without any connection with mobile phone when it is in the state of pairing. In addition, display battery state on Apple devices. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help 4 / 5 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. 5 / 5