GURUGEAR/110*90mm/80g/12P/23//0.5MM 603-00001-131R Federal Communications Commission notice FCC Label This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. the receiver is connected. rom that to which help. C sponsible for compliance with the FCC Rules could void the users authority to operate this equipment. OWNERS MANUAL GuruGear Active Noise Canceling Bluetooth Wireless Over-Ear Headphones -
White/Silver & Black/Silver MODEL NO: NPFUY / NPFUZ Made in China Distributed by Bluestem Brands Inc., 7075 Flying Cloud Drive, Eden Prairie, MN 55344 Tel: 1-800-208-2500
(Monday-Friday 8:00am-8:00pm Central time) Contents Specification 2. Battery Precautions 3. Getting Started 1. Introduction . 2 2. Battery Precautions . 3 3. Getting Started . 4 4. Fit and adjustment . 5 5. Cable Connection . 6 6. Bluetooth Connection . 6 7. Function Guidance . 7 8. LED Display Status . 7 9. Battery Charging . 8 10. Product care . 8 Please read the following safety warnings and precaution before using your device. Approximately 85dB Load impedance: 32 S/N:
Frequency range: 22Hz-20KHz Power supply: Lithium battery or USB cable Audio source:
Function spec: Bluetooth, Microphone, Active Noise Cancelling iPhone, iPad, Smartphone, Notebook, MP3, MP4, etc 1. Introduction Thank you for purchasing our Active Noise Cancelling Bluetooth headphone. This device can be easily connected with Smartphone, tablet PC, and other devices via Bluetooth during your traveling and daily use. The device is powered by a built-in rechargeable lithium battery. Please charge the battery for at least 8 hours before your first use of device. If the device is not used for a long period of time, the battery may be out of power. Please re-charge the battery. Rechargeable batteries are only to be charged under adult supervision. Use only the supplied micro USB cable to recharge the battery. Improper charging may damage the battery and the device. Do not attempt to open the rechargeable battery or battery pack. There are no serviceable parts inside. Should a battery leak, the device may become damaged. Clean the battery compartment immediately, avoid touching your skin. Keep the battery out of reach of children. If swallowed, consult a physician immediately. Avoid storing the battery in an extremely hot or cold environment. A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Do not dispose batteries in a fire as they may explode. Batteries may also explode if damaged. Please dispose them according to local regulation. Do not dispose them as household waste.
-1-
-2-
-3-
Volume Down/Previous Volume Up/Next Play/Pause/Answer call/LED LED AUX IN MIC ON/OFF Noise Cancelling Bluetooth USB for Charging
-4-
4. Fit and Adjustment 5. Cable Connection Step . 1 Put on this headphone Step . 2 Step . 3 Adjustable length Adjustable angle USB for power Cable for audio 6. Bluetooth Connection Pairing the headphone to your Smart device, Smart device should be within 32ft of this headphone. 1. Activate the pairing mode on the headphone by turning the switch to BT . The LED will flash in blue. 2. Turn on the Bluetooth function of your device, (refer to the device owners manual to locate Bluetooth function). 3. Select Search or Discover devices. 4. For white version, Select bluetooth "NPFUY"
For black version, Select bluetooth "NPFUZ"
5. If requested, type the password or PIN 0000 After completing the steps above, a message on your Smart device will appear confirming that your device is now paired/ connected. In case of unsuccessful pairing, turn off the device and restart, then do as steps above. If the Bluetooth on your smart device remains open, when you restart the headphone, the Bluetooth will be connected automatically. 7. Function Guidance Play music from your Smart device Button Operation Function Long Press Volume up Short Press Next song Long Press Volume down Short Press Previous song Short Press Play/Pause, Answer/End a call Long press Ready for pairing 8 LED Display Status LED Display Light indication Right Light Blue Flash Stay Solid Power ON Paired Left Light White Red OFF Active noise cancelling ON Charging in process Fully charged 9. Battery Charging The device has a rechargeable battery. It can be charged by USB cable connected with your computer. When charging, the light below the left button will turn to red. After charged, the device can be used without the power connection. Charge the device again when you hear the headphone make a please charging sound. 10. Product care This device is designed to be light, compact and durable. As an electronic device it must be treated carefully. Putting unnecessary pressure on it or striking the device against other objects may cause damage. To avoid damage to your device, please Do not drop, crush, bend, or apply excessive force to the device. Do not expose your device to moisture, extreme or prolonged heat, cold, humidity, or other adverse conditions. Avoid storing it in damp, humid, or wet places, as it is not waterproof. Clean the unit with a soft cloth or damp chamois leather. Never use solvents. The Unit can only be opened by qualified personnel. This device contains magnets. Keep magnetic field sensitive products such as credit cards and video screen away from this device to avoid damage or malfunction.
-5-
-6-
-7-
-8-