FCC ID: 2A7CR-MG-88 TAIYINENG

TAIYINENG is used with taiI Ageing yoga Mask to provide energy and proper operation mode for the yoga mask. There are two modes of operation:

manual operation and Bluetooth intelligent operation. The operation mode is divided into 5 kinds, and the intensity can be adjusted in 10 grades. I can use the yoga mask I use to deeply activate the skin, tighten it deeply, promote the absorption of active ingredients, make the skin glowing and achieve amazing Features of TAIYINENG beauty effect. to long press increase Short press strength, for three seconds to change the mold test Indicator light Short press to reduce strength, long press for three seconds to change the mold test Open the key Product specifications:

Matters needing attention:

Name TAIYINENG 1, please clean the face before use, and then fully soak the mask essence into the mask cloth, and stick rated voltage 3V DC Rated current 4mA to the face with the pattern outwardly. 2. Taiyi can be combined with the corresponding contact on the decorative side of the mask cloth. working battery Low frequency pulse boot button battery 3. During use, please do not use metal materials to contact taiyinan. 4, each use time should not exceed 25 minutes, not more than 2 times a day. 5. Please place it out of reach of children and avoid high temperature and dust environment. 6. During use, please stop immediately if you feel uncomfortable. Structure design +

country China Use method: choose one of the two manual use:

1. Apply the mask to the surface of your skin, with the patterned side facing out. 2. Turn on the snooze switch. 3. Put it on the corresponding contact on the patterned side of the mask cloth, so that it can be closely combined with the mask. 4. Press + button to adjust to the most comfortable intensity. If the adjustment strength is too high, press - button to adjust back. 5. To change the mold test, long press + or - to change another mode. 6. Please turn off the switch on the laptop when it will stop automatically after 20 minutes. Bluetooth smart (connected to mobile phones) :

1. Apply the mask to the surface of your skin, with the patterned side facing out. 2. Turn on the snooze switch. 3. Put it on the corresponding contact on the patterned side of the mask cloth, so that it can be closely combined with the mask. 4. Turn on the bluetooth of your phon e, scan the QR code with wechat, and enter the Mini program. 5. Adjust the intensity to the most comfortable gear. 6. The default mode is integrated mode. If you want to change the mold test, tap the button that needs the mold test. 7.The system will stop automatically after 20 minutes. Please turn off the switch on the laptop after stopping. Abnormal connection:

Bluetooth connection: Turn on Bluetooth and scan the QR code to enter. 1. Open Settings -- Privacy -- Bluetooth -- turn on the wechat permission 2. Open Settings -- Privacy -- Location permission -- wechat -- Bluetooth permission 3. Enable Positioning -- Hold down positioning --WLAN and Bluetooth scan -- Enable Bluetooth scan

Label and Location FCC ID :

2A7CR-MG-88 TAIYINENG Model No.:

MG-88 FCC ID :

2A7CR-MG-88 Size: L: 3.0cm*W: 2.0cm Label and Location

Shenzhen Meige Tianhua Biological Technology Co., Ltd. Agent Authorization Company: Shenzhen Meige Tianhua Biological Technology Co., Ltd. Address: A304, building 5, Xingjiayuan, Hongxing Community, Songgang Street, Baoan district, Shenzhen Product Name: TAIYINENG Model Number(s): MG-88 Product Description: TAIYINENG We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: 2022-6-15 Signature:

Name:

Qunliang Yu Title:

PM Company: Shenzhen Meige Tianhua Biological Technology Co., Ltd.

Shenzhen Meige Tianhua Biological Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022.6.6 Subject; Request for Confidentiality FCC ID: 2A7CR-MG-88 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Date: 2022-6-14 Signature:

Name:

Qunliang Yu Title:

PM Company: Shenzhen Meige Tianhua Biological Technology Co., Ltd.