FCC ID: 2A323-W82S Wireless Charger

Instruction manual Foldable 3 in 1 Wireless Charging Station Product appearance Instructions for use Foldable Operating Instructions Product parameters Watch wireless charging area Only supported Galaxy Watch TWS wireless charging area Type-C input Phone charging area Bobina di rame 1 Phone charging area Bobina di rame 2 Phone indicator TWS indicator 1. Please connect this wireless charger to the 5V3A, 9V/3A adapter through the Type-c fast charging cable and connect the source 2. Put the phone in the mobile phone charging area and the mobile phone can be charged 3. Place the watch in the watch charging area to charge the watch 4. Put the wireless charging Bluetooth earphone box in the earphone charging area to charge the earphone LED status Mode Power Standby TWS indicator Phone indicator Bright blue light Bright blue light The blue light is always on The blue light is always on TWS charging Blue light to green light Phone charging Blue light to green light The blue light ashes quickly, remove the foreign object and stop ashing The blue light ashes quickly, remove the foreign object and stop ashing FOD Notice!

In order to ensure the safe and ecient charging of the three devices at the same time, it is recommended to use adapters and fast charging cables above 9V/2A or 9V/3A. (If the adapter is lower than 5V/2A, this charger will have a problem of stopping charging) Foldable design the watch charge can be detached for separate use Name Input Foldable 3 in 1 Wireless Charging Station 9V/3A(Max) 5V/3A(Max) Output (phone) 5W/7.5W/10W/15W(Max) Output (TWS) 5W(Max) Output (Galaxy Watch) 3W(Max) Product size 144mm*121mm*25mm Operating frequency 110-205KHz Material ABS+PC Wireless charging eective distance 5mm Notes Watch charger storage The watch wireless charger can be stored in the bottom groove when not in use Applicable equipment Please check whether the mobile phone supports wireless charging. This product supports fast wireless charging function and conforms to QI wireless charging standards; By magnetic induction Enables short-range wireless power transfer. Adapter selection When using a 5V/2A output adapter, the wireless charger supports a 5W load. When using QC3.0 compliant adapters, the wireless charger supports 15W load;

*In order to ensure the normal use of the charger, it is recommended to use PD fast charging or QC3.0 compliant adapter Warn!

Do not put metal debris or magnetic cards on the charging pad, it may cause the charger to heat up!

Foreign objects should be removed when alarming!

Slight heating is normal, and it will heat up during the charging of the mobile phone battery!

Do not place the charger near re sources or corrosive environments!

Packing list Wireless charger X1 USB cable X1 Instruction manual X1 Federal Communications Commission Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

3 IN 1 WIRELESS CHARGER Model:W82S Input:9V=3A(max) 5V= *3A(max) Output?:Phone 5W/7. SW/10W/15W (max) Output2:TWS 5W (max) Output3;Watch 3W (max) Made In China TT ETT HTT INCH df:

[ il |_| 3/2 [ae i# tre ttt ttre TT]

om

Antenna Describe 1 Antenna Describe Antenna Inductive loop coil Antenna Antenna Gain 0dBi Frequency Range 110kHz ~ 205KHz Company Name Shenzhen Meskey Technology co., ltd 2. Size 3. Radiation Pattern View

Shenzhen Meskey Technology co., ltd Date: 2023/06/03 Product Model Number: W82S FCC ID: 2A323-W82S To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:

Testing Approval applications and procedures We declare that Shenzhen ZKT Technology Co., Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by Shenzhen ZKT Technology Co., Ltd. on our behalf shall have the same effect as acts of our own. By:

Title: N/A Contact Person: Ivan Zhang Tel.: +86-13823388801 Email: ivan@meskey.com.cn

Shenzhen Meskey Technology co., ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2A323-W82S To Whom It May Concern, Date: June 3, 2023 Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Ivan Zhang Title: N/A

Shenzhen Meskey Technology co., ltd Model Difference FCC ID: 2A323-W82S Model : W82S, W31, W32, W33Pro, W33, W34, W35, W36 , W37, W40, W55, W56, W57, W58, W66, W68, W69, W70, W71, W72, W73, W75, W75Pro, W78, W78Pro, W79, W80, W81, W82, W82Pro, W82SPro, W83, W83Pro, W84, W85, W86, W87, W88, W89, W90, MOKCA027, GBECA027, CA027

(All models have same circuits diagram, PCB Layout, construction and rated power, only different is the model name.) Sincerely, Applicant: Shenzhen Meskey Technology co., ltd Address: Room 401, Yuanshuo Science Park, Guihua Community, Guanlan, Longhua, Shenzhen, China Contact Person: Ivan Zhang Tel.: +86-13823388801 Email: ivan@meskey.com.cn

Shenzhen Meskey Technology co., ltd Address: Room 401, Yuanshuo Science Park, Guihua Community, Guanlan, Longhua, Shenzhen, China Date: 2023-06-03 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(7) Filing SUBJECT: FCC Application for FCC ID: 2A323-W82S

(Shenzhen Meskey Technology co., ltd) certifies that, as of the date of the filing of the application, ARCR, In. is our designated U.S. agent for service of process for the above referenced FCC ID. (Shenzhen Meskey Technology co., ltd) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. ARCR, In accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information:

Name: ARCR, In. Address: 8900 E 52nd Place, Denver CO 80238 FRN: 0032040362 Contact Person: Charlie Glahe Tel.: 720-470-8948 Email: cglahe@wini.com Sincerely, Signed on behalf of Shenzhen Meskey Technology co., ltd Signed on behalf of ARCR, In. Name: Ivan Zhang Name: Charlie Glahe Title: N/A Title: President Date: 2023-06-03 Date: 2023-06-03