FCC ID: 2AOV6-3MFC-6-2081 3-IN-1 MAGNETIC 15W WIRELESS FAST CHARGER

: 284(D)*90(H) mm Product Introduction Applicable Devices Specications Thanks for purchasing our product penholder wireless charging lamp. It adopts high-end quick charge IC ,with its luxury and compact design, it can be compatible with any mobile phones with QI standard. it can perfectly compatible with Sam sung, Apple fast charge wireless function, to save more time eectively and improve your charging experience. 1. Devices with built-in quick charge/normal charge wireless receiver. 2. Devices with outerface wireless charging receiver. 3. Devices with wireless charging receiver in its protection case . Note: All devices must be Qi standard. Type-C Support Rod 1. Connect the wireless charger to the AC power supply through the power adapter, turn on the wireless charger, the indicator light turns blue within 3 seconds, and then the indicator light turns red and goes into the standby state. Instructions Mobile phone Wireless Charging panel Watch Wireless Charging panel Non-slip mat Cell Phone and Headphone Wireless Charging Panel Product name:Wireless charger Input voltage: 5V/9V (QC3.0 and above) Output power: 15W/10W/7.5W/5W/3W Charging eciency: 70%-80%

Dimension: 70x96x104mm Input power : 18W max. Attention 1. Please keep the charger away from water or other liquid. 2. If you need to lean the charger, please make sure it is power o. 3. Using Environment tempeature remain 1-45 degree. Warranty Card During the product warranty period , if the fault is caused by the quality of the product itself, the user is requested to contact the dealer with this warranty card and purchase certicate to enjoy free repairs. Free naubgannance us bit available in the following situations:

1. There is no warranty card or the product repair label has been damaged. 2. Damage caused by self-disassembly. 3. Failure and man-made mechanical damage caused by water ingress or falling. 4. Failure or danage casued by force majeure. Product name:

Client name(buyers name):

Sale address:

Sale date:

Remark:

User Manual Indicator Light Standard Accessories 1* Wireless Charger 1* User Manual 1* USB Cable 3. The LED indicator light will become steady blue when charging mobile phone. 2.Place your device vertically or horizontally in the center of the Wireless Changer until your device begins to charge. 3-IN-1 MAGNETIC 15W WIRELESS FAST CHARGER FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving an Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the tenna. receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Label Location On EUT Label Product Name: 3-IN-1 MAGNETIC 15W WIRELESS FAST CHARGER Model No.: MP-250 FCC ID: 2AOV6-3MFC-6-2081 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

Shenzhen Minsuo Industrial Co.,Ltd Section 2.911(d)(5)(i) Certification Equipment Type Company name: Shenzhen Minsuo Industrial Co.,Ltd Address: 12th floor, Block B, Tengyao Building, No. 268 Gushu 2nd road,Xixiang Town, Bao'an Shenzhen, Guangdong, China Product Name: 3-IN-1 MAGNETIC 15W WIRELESS FAST CHARGER FCC ID: 2AOV6-3MFC-6-2081 Model(s): MP-250, 3MFC-6/2081, 670983 2.911(d)(5)(i) Equipment Type We, [Shenzhen Minsuo Industrial Co.,Ltd] certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List NOTE 1 Yours sincerely, Name: Henry Xu Date: 2023-06-30 Title and Company name: manager/ Shenzhen Minsuo Industrial Co.,Ltd NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

Shenzhen Minsuo Industrial Co.,Ltd Section 2.911(d)(5)(ii) Certification Applicant (Covered List) Company name: Shenzhen Minsuo Industrial Co.,Ltd Address: 12th floor, Block B, Tengyao Building, No. 268 Gushu 2nd road,Xixiang Town, Bao'an Shenzhen, Guangdong, China Product Name: 3-IN-1 MAGNETIC 15W WIRELESS FAST CHARGER FCC ID: 2AOV6-3MFC-6-2081 Model(s): MP-250, 3MFC-6/2081, 670983 2.911(d)(5)(ii) Applicant filing We, [Shenzhen Minsuo Industrial Co.,Ltd] certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the Covered List NOTE 2, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Henry Xu Date: 2023-06-30 Title and Company name: manager/ Shenzhen Minsuo Industrial Co.,Ltd NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.2

- Shenzhen Minsuo Industrial Co.,Ltd. -

Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 6/29/23 Shenzhen Minsuo Industrial Co.,Ltd. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: [2AOV6-3MFC-6-2081]):

Name and company of U.S. agent: Linkwld LLC Physical U.S. address of agent: 1942 Broadway St. STE 314C, Boulder, CO, 80302, US FRN of U.S. agent: 0033625682 Email address of U.S. agent: Timothy.linkwld@proton.me Linkwld LLC acknowledges their obligation to accept service of process on behalf of Shenzhen Minsuo Industrial Co.,Ltd.. Shenzhen Minsuo Industrial Co.,Ltd. with the FRN [0027171875] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). Sincerely, Signature

[Name] Henry Xu

[Title] Sales 4 0 V

[Company] Shenzhen Minsuo Industrial Co.,Ltd.

, U

) 7

) d

1 1 9 2 _ t n e g A _ S U

l e d o m

_ 8 4 Signature

[Name of U.S. agent] Timothy Zhu

[Title of U.S. agent]Manager

[Company of U.S. agent] Linkwld LLC The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB.

Shenzhen Minsuo Industrial Co.,Ltd Agent Authorization Company: Shenzhen Minsuo Industrial Co.,Ltd Address: 12th floor, Block B, Tengyao Building, No. 268 Gushu 2nd road,Xixiang Town, Bao'an Shenzhen, Guangdong, China Product Name: 3-IN-1 MAGNETIC 15W WIRELESS FAST CHARGER Model Number(s): MP-250, 3MFC-6/2081, 670983 Product Description: 3-IN-1 MAGNETIC 15W WIRELESS FAST CHARGER We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Henry Xu Title:

manager Company: Shenzhen Minsuo Industrial Co.,Ltd Date: 2023-06-30

Shenzhen Minsuo Industrial Co.,Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2AOV6-3MFC-6-2081 Date: 2023-06-30 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description SW SECURITY DESCRIPTION Parts List Tune up In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Henry Xu Title: manager

Shenzhen Minsuo Industrial Co.,Ltd Declaration on Model Differences We, Shenzhen Minsuo Industrial Co.,Ltd 12th floor, Block B, Tengyao Building, No. 268 Gushu 2nd road,Xixiang Town, Bao'an Shenzhen, Guangdong, China Declare that the following product(s):

FCC ID: 2AOV6-3MFC-6-2081 Product Name: 3-IN-1 MAGNETIC 15W WIRELESS FAST CHARGER Model No.: MP-250, 3MFC-6/2081, 670983 Utilize the identical circuit design, PCB layout, shielding and interface with (MP-250), only the model number different. Therefore this application can be regarded as identical in performance to the submitted test sample. The manufacturer would take all the responsibilities for the above product(s). For and on behalf of Authorized person Name: Henry Xu Position: manager Date of issue: 2023-06-30

*I hereby declare that I am entitled to sign on behalf of the applicant and that the information supplied is correct and complete.