BT5 Instruction Manual I.NOTES Please use and store the device under normal temperature. Please against rain or humidity. Please do not throw or drop. Please do not disassemble, amend or alter device alone. II.Technic data 1.Bluetooth: V3.0+EDR Version 2.Transmission distance: 10M or so 3.Frequency coverage: 180HZ-18KHZ 4.SNR: 80dB 5.Charging voltage: 5V 6.Charging time: 3.5 hours 7.Continuous broadcasting: 1 hours (under maximum sound) 8.Li-ion battery: 3.7V/250mA 9.LED signal lamp: working with Blue, charging with Red, off once charging full 10.Unit size: 45*H56MM 11.Unit weight: 63g III.Function 1.Bluetooth: V3.0+EDR (support A2DP V1.2 or AVRCP V1.4 profiles) 10M transmission distance. 2.available to play music by Bluetooth devices, also available to be connected by 3.5M line with other sound equipments to broadcast music. 3.Set-in Li-ion chargeable battery, charge by USB cable, multiple circuit protection. 4.aluminum drum shape design, cute, specific, portable, good for party, trip, sports to enjoy music anywhere. IV.Function button and cable 1.ON/OFF: switch the button, three function step, OFF/Minimum sound/Maximum sound, blue LED flash once the device opening. 2.USB Port: Only power charge 3.Audio input port: 3.5M line audio input V.Function specification 1. Bluetooth speaker pair with cell phone Open the device, blue LED flash, and shall seek "MYLEGO" on your Bluetooth pairing, confirm the pairing device ( the password of Bluetooth match is "0000" if the Bluetooth device under 2.0 version.)the speaker will pairing the device at once if the device had ever paired the speaker shile the device Bluetooth is opening. 2. playing music by Bluetooth function Play music directly once the speaker paired with the sound equipment, signal transmission distance is 10M or so. 3. Audio input broadcasting Use USB Cable to connect the PC, and 3.5MM set-into the device to enjoy good music. Playing music and power charging available to be at the same time. 4. Charging USB Line to connect with PC or other USB cable, Red LED flash. The LED power off once the power charging enough. 5. Low power caution Means power is not enough once the speaker sound as DONG, DONG while broadcasting. VI.accessories 1. Drum Speaker 2. USB Cable 3. Instruction manual 1PC 1PC Audio 1PC R5B-BTCAN FCC ID: R5B- BTCAN IC: 11474A-BTCAN Shenzhen Mission Electronic Limited Model name: Bluetooth Speaker Model No.: BTCAN This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device complies with industry Canada license-exempt RSS standard(s). Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement."
l'utilisateur de l'appareil doit accepter
(2) This Class [B] digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe [B] est conforme la norme NMB-003 du Canada.