354x103mm 105g 3 in 1 Foldable Wireless Stand User manual Product Introducon The 3-in-1 wireless charger with night light, a compact charging house, powered from only one outlet, can charge 3 devices simultaneously. When charge your mobile phone, apple watches, and your Air Pods 2 or AirPods Pro or some other TWS, just put them on,wireless charging will automacally start.Touch control night light,3 level to adjust the brightness of the light.It can be used as mobile phone bracket as well,mobile phone bracket 90 degree free adjustment.All this will make your desk clean and dy and make your life easier. Product Appearance LED indicator light Type-C interface input Noce:
To ensure charging 3 devices safely and eciently, you must use 5V/3A adapter and quick charge cable, if including 15W fast charging phones, you must use 9V/3A or 12V/2A adapter and quick charge cable
(if not use the appropriate adapter and quick charge cable, the charger may not Charge phone fast, or may not charge 3 devices simultaneously, or may even damage the charger.) Wireless charge area for Phone Touch switch for night light LED night light LED indicator light for phone LED indicator light for iwatch Wireless Charge area for iWatch magnecally Wireless charge area for TWS earphone Touch area LED indicator light for TWS earphone Operaon Steps 1. Connect the charger to a 5V/3A,9V/3A or 12V/2A adapter through a type-C quick charge cable to switch on the power;
2. Put your phone on and charge;
3. Put the apple watch on and suck it up to charge 4. Put your earphone case on and charge. 5. Touch control night light,3 level to adjust the brightness of the light. LED indicator instrucons 1. The LED LED indicator light will light up white when the wireless charging is in stand-by mode. 2. When charging the phone wirelessly, the led indicator will light up BLUE and turn o aer blinking for 20 seconds. 3. When charging the iwatch wirelessly, the led indicator will light up RED and turn o aer blinking for 20 seconds. 4. When charging the TWS earphone case wirelessly, the led indicator will light up GREEN and turn o aer blinking for 20 seconds. Using the touch night light When the wireless charging is normally powered on,touch the area ,the brightness will be increased by one gear,there are 3 gears brightness,the light will be o on the fourth me touch. Charging Schemac Diagram Applicable Devices 1. Smart Phone:
Apple: iPhone 12, 12Pro,12 Pro Max,SE,11,11 Pro,11 Pro Max, Xs, Xs Max, XR,X, 8, 8 Plus;
Samsung: Galaxy S: FE 5G,205G, 20+ 5G, 20 Ultra 5G, 10, 10+, l0e, 9,9+,8, 8+,7,7 edge,6,6 edge, 6 edge+, 6 G9209, 6 Acve; Galaxy Note: 20,20 Ultra SG,10, lOe,10+,9,8,7,6,5;
Huawei: P40 Pro,P40 Pro+ ,P30 Pro; Mate:40 RS,40 Pro,40 Pro+ ,30 SG,30 Pro 5G, 30, 30 Pro, 30 RS, 20 Pro, 20RS, Xiaomi: 1010 Pro99ProMix 3Mix 2s;
lncluding other devices with wireless charging receiver built-in; other some devices need to add a wireless charging receiver. 2. SmartWatch:
Apple: iWatchS2,S3,S4,S5,S6,SE,S7. 3. TWS bluetooth earphone:
AirPods 2, AirPods Pro Sumsung Galaxy Buds,Buds+;Huawei Freebuds 2,3; and more TWS(with wireless charging case). Product Specicaon Input: 5V/3A,9V/3A,12V/2A Input lnterface: Type-C port Phone Output: 15W/10W/7.5W/5W Transmission Distance(Phone): 8mm Watch Output: 2W (Apple iWatchS2,S3,S4,S5,S6,SE.) Conversion Rate(Phone): 80%
Earphone Output: 5W (TWS Earphone:
Apple AirPods 2, Pro; Sumsung Galaxy Buds,Buds+;
Huawei Freebuds 2,3; and more.) Product Size: 165 X 143X 15.8mm Accessories List Wireless Charger* 1, Type-C quick charge cable*1, User manual*1, Adapter*1 Aenon 1. Please keep the charger away from water or other liquid;
2. If you need to clean the charger,please make sure it is not switched on the power;
3. Using Environment temperature remain 0-25. Vercally or horizontally Charging 3 Apple devices simultaneously The phone can be charged by wearing a non-metal case Made in China FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.