Bamboo Fast Wireless Charging Dock Station Instruction Manual MSL-M6020Q 8 9 Wireless Charging Output Surface USB-A Outputs DC Input Port Watch Charging Stand Pad/Phone Holder Earbuds Charging Case Stand Accessories Holder LED Indicator AC Adapter Functions:
1. 2. 3. 4. 5. 6. 7. 8. 9. Whats included:
1 x Wirelsss Charging Dock Station 1 x UL Listed AC adapter 1 x Instruction Manual AC Adapter input: 12V/2A USBA Output 1/2/3: Total 5V/2.4A (Max) Wireless Output: 5W/7.5W/10W Instructions:
1. Wireless Charging Mobile phones and other electronic devices:
Connect the provided UL Listed AC adapter cable to the DC input port(3) of the charging station, then connect the AC adapter to a power source. LED indicator will glow GREEN when the device is in wireless charging standby. Place the wireless charging supported mobile device on the wireless charging surface(1), LED will glow RED when device is charging. Once fully charged remove the device.
Note: When wireless charging, if the LED a wireless charging device or there is an object between the device and charging surface interfering with the charging. process. 2. Charging mobile phones and other electronic devices:
Connect the charging cable to your mobile phone/device using the appropriate connector. Connect the USB part of the cable into the USB-A Output(2). USB-A 1: 5V/1A; USB-A 2: 5V/1A ;
USB-A 3: 5V/2.4A. Remove the cable from your mobile device when it is fully charged. 3. Smart Watch Charging Cable Stand:
Take the USB end of the watch charging cable(NOT INCLUDED) and run it through the front of the watch charging stand(4). Plug the watch charging cable into the USB-A 1 Output(2) of the station. Take the charging end of the cable and place it in the designated cut out on the stand, if placed correctly charging surface 4. stand. Place your watch on the stand to begin charging, remove once fully charged. True Wireless Earbuds Charging Stand:
Plug the USB end of the charging cable
(NOT INCLUDED) to the USB-A 1 Output(2) and pull the other side of the cable through the hole of the earbud charging case stand(6). Connect your earbuds charging case with the tip to begin charging, remove once fully charged. SAFETY PRECAUTIONS:
WARNING-When using this product, basic precautions should always be followed:
Read all the instructions before use. Never store or use this product in temperatures below 32F(0C) or above 115F(45C). Do not overcharge your phone. The unit may become hot under excessive use. Remove your phone once it is fully charged. Never charge your phone for more than 7 hours at a time. To reduce the risk of injury, close supervision is required when the product is used near children. Do not expose the device to moisture. Do not use the device in excess of its output rating. Overload outputs above the 1. 2. 3. 4. 5. 6. 7. Do not use the device if damaged or 8. Do not disassemble the device. For professional. incorrect reassembly may 9. 10. 11. or temperatures above 104F may cause explosion. use only identical replacement parts to ensure product safety. Attachments on the back of your phone can impede the effectiveness of the wireless charger, and lead to overheating. Please remove any attachments from the phone before charging on this device, attachments can interfer with wireless charging and lead to over heating. FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Warning:
(1)
(2)
approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. MADE IN CHINA