Omni Outdoor Bluetooth Speaker Instruction Manual SM-2927 Instructions:
(Be sure to fully charge the speaker before using for the first time. Charging the Speaker Connect the provided charging cable to a power source and to the micro USB port on the speaker (4). The LED indicator light will glow red when charging and turn off when fully charged. Bluetooth Setup:
Turn ON/OFF switch(2) to ON position, LED indicator(3) will flash BLUE. Turn on the Bluetooth function on mobile device, Select Omni Outdoor pairing name. LED will turn solid BLUE if successfully paired Speaker will automatically pair if the mobile device has been paired before. Turn ON/OFF switch(2) to OFF position to turn off the device. 1. 2.
8. 9. 10. 11. 1 4 2 3 Functions:
1. 2. 3. 4. 5. Rubber cover ON/OFF Switch Micro-USB input port LED Indicator Caribiner Whats included:
1 x Bluetooth Speaker (SM-2927) 1 x USB to Micro-USB Charging Cable 1 x Instruction Manual 1 x Caribiner Playing time: up to 1.5 hr at max volume Charging time: up to 1.5 hr Pairing Name: Omni Outdoor SAFETY PRECAUTIONS:
WARNING-When using this product, basic precautions should always be followed:
Read all the instructions before use. Never store or use this product in temperatures below 32F(0C) or above 115F(45C). The units full performance is achieved only after 2 or 3 completed charge and discharge cycles. To reduce the risk of injury, close supervision is necessary when the product is used near children. Do not expose the device to moisture. 1. 2. 3. 4. 5. 6. Do not use the device in excess of its output rating. Overload outputs above 7. Do not use the device if damaged or explosion or risk of injury. Do not disassemble the device. For professional. Incorrect reassembly may or temperatures above 104F may cause explosion. use only identical replacement parts to ensure product safety FCC Statement:
approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment general uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. MADE IN CHINA FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.