High Sierra Kodika IPX7 Outdoor Speaker Instruction Manual XJ0820(8053-08) 8. 7. 6. 5. 4. 3. 2. 1. 1. 2. 3. 4. 5. 6. 7. 8. Micro-USB Input Vol +/Next Track Power ON/OFF Vol-/Previous Track Bluetooth LED indicator Red LED Green LED Wireless charging receiver Whats included:
1 x Bluetooth Speaker (8053-08) 1 x USB to Micro-USB Charging Cable 1 x Instruction Manual Playing time: up to12hrs at max volume Charging time: up to 8hrs Pairing Name: "High Sierra IPX7"
Capacity: 5000mAh Micro-USB Input: DC 5V/1000mA Wireless Charging Input: 5V/1A(5W) Instructions:
Be sure to fully charge the speaker before using for the first time. Charging the Speaker Connect the provided charging cable to a power source and to the Micro USB port 1 on the speaker. or To wirelessly charge the speaker, place the wireless charging input surface(8) onto a wireless charging pad. Red LED light when charging the speaker and light turn to Green when the speaker is fully charged,Red/Green LED will turn off once speaker unplugged or remove it from a wireless charging pad. Remove the USB cable from your mobile device when it is fully charged. Bluetooth Setup:
Press and hold Speaker ON/OFF Button(3) to turn ON the speaker, Bluetooth LED indicator(5) will flash BLUE. Turn on the Bluetooth function on mobile device, Select High Sierra IPX7 pairing name. LED will turn solid BLUE if successfully paired. Speaker will automatically pair if the mobile device has been paired before. Press and hold Speaker ON/OFF Button(3) to turn off the device Using the Speaker When receiving a phone call, press ON/OFF button to answer and again to hang up. Double press to redial the last call. Vol+/Next track:
Long press - next track. Short press - increase volume. Vol-/Previous track:
Long press - previous track Short press - reduce volume
. 1. 2. 3. SAFETY PRECAUTIONS:
WARNING-When using this product, basic precautions should always be followed:
Read all the instructions before use. Never store or use this product in temperatures below 32F(0C) or above 115F(45C). Do not overcharge Phone. Unit may get hot with excessive use. Remove Phone when it is fully charged. Never charge for more than 7 hours at a time. The units full performance is achieved only after 2 or 3 completed charge and discharge cycles. To reduce the risk of injury, close supervision is necessary when the product is used near children. Do not expose the device to moisture. Do not use the device in excess of its output rating. Overload outputs above Do not use the device if damaged or 1. 2. 3. 4. 5. 6. 7. 8. 9. explosion or risk of injury. Do not disassemble the device. For 10. professional. Incorrect reassembly may 11. 12. 13. or temperatures above 104F may cause explosion. use only identical replacement parts to ensure product safety Attachments on the back of your phone can impede the effectiveness of the wireless charger, and lead to overheating. Please remove attachments from the phone before charging on this device. FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator your body:
Use only the supplied antenna MADE IN CHINA