UV Sanitizer with Wireless Charger Instruction Manual:
MSL-M6044QSNT27 Tech Specifications:
Type-C Input: DC 5V/2A Wireless Output: 5W lnstructions:
1. Wireless Charging Function:
Connect the provided charging cable to a power source and to the Type-C port . Once connected the LED Indicator will begin to GREEN. Place wireless charging supported mobile device on the charging surface,the LED Indicator doesn't change.
Note: When wireless charging, if the LED indicator flashes blue the device is either Note a wireless charging device or there is an object between the device and charging surface interfering with the charging process. Functions:
1. UV-C Lights 2. LED Indicator 3. Touch Button 4. Type-C Input Port 5. Cover 6. Wireless Charging Surface 7. Sanitizing Compartment 8. General Lights What's included:
1 x UV Sanitizer with Wireless Charger 1 x USB-A to Type-C Cable 1 x lnstruction Manual 2. UV Sanitizing Function:
Press the Touch Button to turn on the UV lights. The LED indictor will flash RED when UV Sanitizing has started. The UV lights will turn off itself after 5mins, or press button to turn off UV lights.
(There will be a tick sound and the LED indicatorturns GREEN once sanitizing is done.)
DO NOT LIFT UP THE COVER ONCE THE SANITIZING PROCESS HAS STARTED:
The UV LED will automatically shut off when you open the lid during sanitizing process. 1. 2. 3. 4. 5. 6. 7. 9. 11. 12. 13. SAFETY PRECAUTIONS:
WARNING-When using this product, basic precautions should always be followed:
Read all the instructions before use. Never store or use this product in temperatures below 32F(0C) or above 115F(45C). Do not overcharge your phone. The unit may become hot under excessive use. Remove your phone once it is fully charged. Never charge your phone for more than 7 hours at a time. The unit will only achieve full performance after 2 or 3 completed charge and discharge cycles. To reduce the risk of injury, close supervision is required when the product is used near children. Do not expose the device to moisture. Do not use the device in excess of its output rating. Overload outputs above the 8. Do not use the device if damaged or explosion or risk of injury. Do not disassemble the device. For 10. professional. incorrect reassembly may or temperatures above 104F may cause explosion. use only identical replacement parts to ensure product safety. Attachments on the back of your phone can impede the effectiveness of the wireless charger, and lead to overheating. Please remove any attachments from the phone before charging on this device. FCC Informat on This device complies with Part 15 of the FCC Rules. Caut on: Any changes or modications not expressly approved could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and
(2) interference that may cause undesired operation. this device must accept any interference received, including This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimumdistance 20cm between the radiator &your body. approved by the party responsible for compliance could void the users authority to operate the equipment. EPA Est. NO.: 97922-CHN-1 MADE IN CHINA