UV Sterilization Desk Clock with Wireless Charging Instruction Manual: MSL-M6025Q Functions:
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. UV-C Light Button ON/OFF Button Next Menu Previous Time Display Temperature Display Sterilization Compartment Reset Type-C Input Port USB-A Output UV-C Lights Cover/Wireless Charging Surface-(phone needs to be right in the middle of surface) Whats included:
1 x UV Sterilizer w/Wireless Clock 1 x USB-A to Type-C Cable 1 x Instruction Manual Type-C Input: DC 5V/3A USB-A Output: DC 5V/2 A Wireless Output: 5W Instructions:
1. 2. 3. 4.
Using the Desk Clock:
Be sure the clock is always connected to a power source using the provided USB-A to Type-C Cable. Charging Mobile Phones and other Electronic Devices by Cable:
Connect the charging cable to your mobile phone/device using the appropriate connector. Connect the USB part of the cable to the USB-A Output(11) of the clock. Remove the USB cable from your mobile device when it is fully charged. Wireless Charging Mobile phones and other electronic devices:
Place your wireless charging supported mobile device on the charging surface(13). The charging will automatically begin. When device is charging a wireless charging symbol will show in the top left hand side of the clocks display screen. Using the UV Sterilizing Function:
Press the UV-C Light Button(1) to turn on the UV lights. Once turned on a light up icon will left hand side of the clocks display screen. The UV lights will turn off by itself after 5mins, or press button(1) to turn off UV lights. There will be a tone and LED turn off once sterilize done. DO NOT LIFT UP THE COVER(13) ONCE THE STERILIZING PROCESS HAS STARTED:
The UV LED will automatically shut off when you open the lid during sterilizing process. 1. Clock Functions:
Once power on, the display will show the time and temperature automatically. Press the Menu button(4) to choose a desired mode such as (Time/Date/A1/A2/
A3) as shown below. Press and hold the Menu button(4) to enter the desired mode, and to adjust the settings use the Next(3) and Previous(5) buttons. Press(1) to turn on clock, press 3 times to adjust brightness of digit, clock switch off after 4th time pressing. Time:
Setting range:
- Hour: 1-12 hour or 0-23 hour cycle
- Minute: 00--59 2. PM is indicated at the left side of display when set to 12 hour cycle. Date:
Setting range:
-Year: 2000-2099
- Month: 1-12
- Day: 1-31 3. Clock Displays:
Setting Clock Face Display: Press Next button to choose from 3 clock face modes as explained below:
Dp-1: The time lasts for 10 seconds and then switched to show the date for 3 seconds before switching back to the date. Dp-2: This mode display time or date at 4. Dp-3: display time Alarms:
Press and hold the Menu button(4) to Select A1, A2 or A3 and to set the desired alarm time use the Next(3) and Previous(5) buttons to adjust the hours, then press the Menu button(4) to toggle to minutes. 5. When Alarm is set, a alarm logo will display at the bottom left side of the clock display. When Alarm rings, press buttons 2,3,4 or 5 to turn off alarm. If not it will turn off after 60 seconds and reset for the next day. Temperature:
Once clock is turned ON the temperature is automatically detected and displayed.
- Default temperature units:
0C - 50C (32F - 122F). 6. Long Press Previous button(5) to switch to Fahrenheit/Celsius. The temperature will always display except when Power-save mode (ON). Power-saving:
Turn on/off the power-saving function by pressing the Previous button(5). --Sd will display press the button again to turn ON power-saving. Display will show ONSd when ON and --Sd when OFF. External power-off protection If power supply is interrupted, clock function will keep time though the LED display will turn off and buttons will be unresponsive. Once powered is restored, the time will resume appropriately. SAFETY PRECAUTIONS:
WARNING-When using this product, basic precautions should always be followed:
Read all the instructions before use. Never store or use this product in temperatures below 32F(0C) or above 115F(45C). Do not overcharge your phone. The unit may become hot under excessive use. Remove your phone once it is fully charged. Never charge your phone for more than 7 hours at a time. To reduce the risk of injury, close supervision is required when the product is 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. used near children. Do not expose the device to moisture. Do not use the device in excess of its output rating. Overload outputs above the Do not use the device if damaged or explosion or risk of injury. Do not disassemble the device. For professional. incorrect reassembly may or temperatures above 104F may cause explosion. use only identical replacement parts to ensure product safety. Attachments on the back of your phone can impede the effectiveness of the wireless charger, and lead to overheating. Please remove any attachments from the phone before charging on this device. FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Warning:
(1)
(2)
approved by the party responsible for compliance could void the users authority to operate the equipment. MADE IN CHINA FCCCaution Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothe followingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2) thisdevicemustacceptanyinterferencereceived,includinginterferencethatmay causeundesiredoperation. AnyChangesormodificationsnotexpresslyapprovedbythepartyresponsiblefor compliancecouldvoidtheuser'sauthoritytooperatetheequipment. Note: ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClass Bdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsaredesignedto providereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation. Thisequipmentgeneratesusesandcanradiateradiofrequencyenergyand,ifnot installedandusedinaccordancewiththeinstructions,maycauseharmfulinterference toradiocommunications.However,thereisnoguaranteethatinterferencewillnot occurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferenceto radioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoff andon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthe followingmeasures:
-Reorientorrelocatethereceivingantenna.
-Increasetheseparationbetweentheequipmentandreceiver.
-Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthe receiverisconnected.
-Consultthedealeroranexperiencedradio/TVtechnicianforhelp. ThisequipmentcomplieswithFCCradiationexposurelimitssetforthforan uncontrolledenvironment.Thisequipmentshouldbeinstalledandoperatedwith minimumdistance20cmbetweentheradiator&yourbody.