Wireless Charger Instruction Manual MSL-M1030Q Features:
1. 2. 3. Charging Pad Surface LED Indicator Type-C Input Port Whats included:
1 x Wireless Charging Pad 1 x USB to Type-C Cable 1 x Instruction Manual Input power: 5V/2A 9V/2A Output power: 5W/7.5W/10W/15W INSTRUCTIONS:
1. a. Charging Mobile Devices:
Ensure that your phone or tablet supports wireless charging. It will be listed in the b. c.
the last page of this manual). Connect the wireless charging pad to a USB adapter with the provided cable. Once connected LED Indicator will glow GREEN. Place the enabled device on the surface of the wireless charging pad. The LED will turn RED to indicate that the phone is charging. Note: To charge devices, use only the accessory cable or the cable included with your own device by the manufacturer. SAFETY PRECAUTIONS:
Read all the instructions before using the product. 1. 2. Do not use on an aircraft or in a hospital. To reduce the risk of injury, close supervision is necessary when the product is used near children. Do not expose the device to any moisture. Do not use the device in excess of its output rating. Overloaded outputs above 3. 4. 5. Do not use the device if damaged or exhibit unpredictable behavior resulting in 6. Do not disassemble the device. Take it to or repair is required. Incorrect reassembly 7. excessive temperature. Exposure to extreme heat may cause explosion. 8. 9. 10. 11. repair person using only identical replacement parts. This will ensure that the safety of the product is maintained. This device is not a toy. Do not overcharge Phone. Unit may get hot with excessive use. Remove Phone when it is fully charged. Never charge for more than 7 hours at a time. Attachments on the back of your phone can impede the effectiveness of the wireless charger, and lead to overheating. Please remove attachments from the phone before charging on this device. FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
(1)
(2)
Warning:
approved by the party responsible for compliance could void the users authority to operate the equipment.
***KEEP OUT OF REACH OF CHILDREN***
FCCCaution Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothe followingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2) thisdevicemustacceptanyinterferencereceived,includinginterferencethatmay causeundesiredoperation. AnyChangesormodificationsnotexpresslyapprovedbythepartyresponsiblefor compliancecouldvoidtheuser'sauthoritytooperatetheequipment. Note: ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClass Bdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsaredesignedto providereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation. Thisequipmentgeneratesusesandcanradiateradiofrequencyenergyand,ifnot installedandusedinaccordancewiththeinstructions,maycauseharmfulinterference toradiocommunications.However,thereisnoguaranteethatinterferencewillnot occurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferenceto radioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoff andon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthe followingmeasures:
-Reorientorrelocatethereceivingantenna.
-Increasetheseparationbetweentheequipmentandreceiver.
-Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthe receiverisconnected.
-Consultthedealeroranexperiencedradio/TVtechnicianforhelp. ThisequipmentcomplieswithFCCradiationexposurelimitssetforthforan uncontrolledenvironment.Thisequipmentshouldbeinstalledandoperatedwith minimumdistance20cmbetweentheradiator&yourbody.