Model no.: MIR-TE100 Temperature and Humidity Sensor User Manual Product Description Battery level Temperature Reset button Battery slots Battery cover Entering the Network Configuration Mode 1. Power on the product. Rotate the battery cover counterclockwise to open it. Install two AAA batteries. 2. Press and hold the button for 5s to restore the product to factory settings. The signal icon will rapidly blink, and the product will automatically enter the network configuration mode oncethe factory settings have been restored. Press and hold the button for5s. Press and hold the button for $sto 10sto make the product enter the network configuration mode. When you press and hold the button for 5s, thesignal icon rapidly blinks, Release the button to configure the network and wait about 20s for the product to enter the network configuration mode, Duringthis process, the signal icon blinks (it may blink irregularly). After the product enters the network configuration mode, the signal icon will be steady on and the product will report its status. Ifthe product fails to enter the network configuration mode, the signal iconis ff. Installation Instructions Installation method 1: Usea 3M sticker to affix the product to the target position Installation method 2: Place the product on the support. _ Technical Parameters Wireless Technology ZigBee Working Voltage 3V Transmission Frequency | 2.4GHz
-10C to +55C Working Temperature 0% to 99.9% RH Undervoltage Alarm Supported Dimensions 61.2 mm x 23mm Toxic or Hazardous Substances or Elements of this Product Toxic or Hazardous Substances or Elements, Hexavalent|Polybrominated | Polybrominated Component |Lead] Mercury|Cadmium} chromium] biphenyls | diphenylethers Name (Pb)) (He) | (cd) | (crv) (PBBs) (PBDEs) LED o} o PcB x} 0 Cover and other x} 0 0 cl This table complies with SJ/T 11364. O:indicates that the toxic or hazardous substance amount contained in all homogeneous materials ofa component does not exceed that stipulated inGB/T 26572, X: indicates that the toxic or hazardous substance amount contained inat least one of the homogeneous materials of acomponent exceeds that stipulated in GB/T 26572. Warranty Certificate Warranty policy:
1. Ifthe product has quality problems within 7 days of the payment date, you can apply for a refund based on the invoice price or to replace the product with one of the same model. Ifthe product has quality problems within 15 days of the payment N date, you can apply to replace the product with one of the same model. w
. Ifthe product has quality problems within 12 months of the payment date, you can apply to have the product repaired. Whatis not covered under this warranty:
1. The product owner has no warranty certificate or the warranty service has expired. N
. Damage caused by improper use, maintenance, or storage
. Damage caused by disassembly and repair without Tuya's authorization w s
. Damage caused by force majeure Normal discoloration and depreciation after the product has been 2 used User Form User information (Specify real information. Tuya promises to use the information only for after-sales services.) Name Phone number Email Zipcode Address Productinformation Name _________s Model. Color __________ Product SN Service Return Replace CQ) Repair OQ Fault symptoms Handling date Maintenance personnel signature Vendor Form User information (Specify real information. Tuya promises to use the information only for after-sales services.) Name Phone number __ Email Zipcode Address ____________ Productinformation Name ______ Model Color ____ Product SN Service Return) Replace CQ) Repair Fault symptoms Handling date Maintenance personnel signature This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment. Such modifications or change could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits fora Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur ina particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, theuser is encouraged totry to correct the interference by one or more of the following measures:
~ Reorient or relocate the receiving antenna.
~- Increase the separation between the equipmentand receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
~- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC's RF exposure guidelines, this equipment should be installed and operated with aminimum distance of 20cm between the radiator and your body. The device has been evaluated to meet general RF exposure requirement. This equipment complies with FCC's RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-located or conjunction with any other antenna or transmitter.