FCC ID: 2ANIV-LF-04 REMOTE

LED Video LED light User manual LED

, COBLED 95 8 2.4GHz1616

AC LED 1. AC ON/OFF, 2.LED RUN 3. 10%-100%

4./

GR/CH

(1-16) GR/CH

(0-9A-F) 8 LED,, Preface

LED SET LED photography light source is stable, high quality color temperature, powerful, suitable for studio shooting, interview light, still life shooting and video shooting. Can be selected with a special remote control, wireless packet dimming, wireless brightness adjustment, rich functions, convenient operation. The product has the following highlights:

The high-power COB LED lamp with high brightness and stable light source. The guider no higher than 95 , which truly reduces the color of the object LCD display parameters (after setting for 8 seconds) are saved automatically. Optional remote control, 2.4 GHz wireless grouping control with 16 groups and 16 channels , wireless adjustment of each group brightness. Equipped with heat sink and built-in fan for efficient heat dissipation to control the temperature protection and extended lamp life. Note Dont place the light in a high temperature and high humidity place. The light with temperature protection function. When the temperature is too high, it enters the protection state and returns to normal when the temperature be decreased . Dont touch the product with wet hands and do not immerse the product in water or be exposed to rain. Dont remove or modify products. If the product is damaged by fall or other accident, please send the product to the manufacturer's authorized maintenance center for inspection and repair.

< >LED

< CH >< >< + >< - >

< GR >< >< + >< - >

*COLOR

*8 Display screen Product Description LED lamp Umbrella hole Lamp joint locking knob Brightness adjustment knob / confirmation key On/Off Power switch Direction adjustment handle Bracket Display screen Channel / Group key Insurance seat AC power outlet Wireless icon Light icon Brightness Channel Group Use of guidelines Remote control Wireless icon Brightness Light icon Color temperature

+ key Color temperature button Channel button 1. Start Using led Lights Connect AC power supply Press the ON / OFF button to turn on the power, and the digital display panel in on. 2.LED light switch the light on or off. After the power is turned on, press "RUN" to turn 3.Brightness After the power is turned on, the adjusting knob to adjust the power. Adjustable power range: 10 % -100 %

4.Channel / Group PressGR/CH knob until flicker in the display.then select the dial setting(1-16) channel, and then press the dial key to confirm;

PressGR/CH knob until flicker in the display, then select the dial setting(0-9, A-F) group, and then press the dial key to confirm. Note: the flash parameters will not be stored until 8 seconds after setting. Temperature detection This light always detects the temperature of LED light .When the temperature too high,the light will be turn off .

(Remote control purchased by separately) Press the < > button to control the LED light on or off Press<+>, <->to adjust the brightness of the light Press the "CH" key, flicker < >on the screen, and press the <+>

<-> key to set the channel. Press the "GR" key, flicker < > on the screen, and then press the

"+" "-''-'' key to set the group. Note:*Please keep the same channel and same group for light and remote .

*If the light without color temperature adjustment function, the COLOR( color temperature )key is not supported.

*It will take 8 seconds for the remote control parameter setting to be memorized and saved Channel Group

- key Remote control power switch LED light switch Group key SET key Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment

REMOTE Trade Name: NEEWER Model No.: LF-04 Internal Battery: AAA 1.5V*2 FCC ID: 2ANIV-LF-04 Made in China

April 25, 2021 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Shenzhen Timeway Testing Laboratories/ Zone C, 1st Floor, Block B, Jun Xiang Da Building, Zhongshan Park Road West, Tong Le Village, Nanshan District, Shenzhen, China (Name of Agent company name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with S h e n z h e n N e e w e r T e c h n o l o g y C o . , L t d /

R O O M 1 9 0 1 - 1 9 0 3 , B l o c k A , L U S H A N B U I L D I N G N O . 3 0 2 3 , C H U N F E N G R D L U O H U D I S T R I C T , S H E N Z E N , C h i n a Dated this: April 25, 2021 Agency agreement expiration date: 12 Months By: Ting Peng Signature Printed Title: Director On behalf of: Shenzhen Neewer Technology Co., Ltd Tel No: +8675525984843

April 25, 2021 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2ANIV-LF-04 Product Name: REMOTE Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:

Schematics Block diagram Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this: April 25, 2021 Agency agreement expiration date: 12 Months By: Ting Peng Signature Printed Title: Director On behalf of: Shenzhen Neewer Technology Co., Ltd Tel No: +8675525984843