Operation steps 3. Use the Type-C charging cable in the package to connect the holder and the car charger. 1. Put the ball head into the nut rst, then insert it into the socket on the back of the holder, tighten the nut clockwise. Note:
The product will automatically hold and charge your iP 12/13 once sensing it. If you dont want to take off your phone case, we suggest using magnetic cases. Please use QC3.0 car charger Magnetic Wireless Car Charger Holder Parameters Model Name JR-ZS291 Material ABS+PC Input 5V 2A 9V 2A 12V 1.5A Output 5W/7.5W/10W/15W (MAX) Input port Type-C Applicable phone size 4.7-6.7 Indicator light Power on Crystal edge light turn on Standby Constant crystal edge light Charging Crystal edge light turns off FOD Flashing crystal edge light Product diagram Heat dissipation hole Crystal edge light Wireless charging area Nut Air vent clip hook 4. Place your phone. It will be securely attached to the charger holder with its auto alignment function. Front Back 2. Loosen the knob and open the hook, insert the hook onto vent blade, then fasten the knob. Open the hook tighten the hook Warning 1. 2. 3. 4. 5. 6. 7. 8. Do not disassemble or ret the product. Do not store it in a wet environment. Please keep the product away from heat and do not charge it near a heat source. Please prevent water or other liquid from entering the product interface. Otherwise the product may be damaged. Do not install the wireless car charger holder over an air bag cover or within the air bag deployment zone. During charging, make sure to remove the metallic/
magnetic protective case or cards (like bank cards), etc. from your device. During charging, the charger may heat up. This is a normal occurrence and wont affect its performance. If the charger or your phone gets too hot, please disconnect the power supply and let it cool down before restarting the charging process. Avoid using bent or damaged USB cables. JR-ZS291 ABS+PC 5V 2A 9V 2A 12V 1.5A 5W/7.5W/10W/15WMAX Type-C 4.7-6.7 2. 4. 1. 3. Type-C 12/13 QC3.0 Warranty A. If there is performance failure on this product and its not cause by human error, we will provide 12-month free warranty service for consumers from the date of purchase. B. Warranty Exceptions
Human damage;
Beyond the warranty period;
Failure to provide valid purchase certicate;
Product damage caused by failure to follow the use, maintain and storage instructions;
Product damage caused by disassembling or repairing the product without authorization, or immerse the product in water;
Damage caused by other force majeure Warranty Card Model:
Customer Name:
Purchase Date:
Tel.:
Distributor:
Invoice Date:
User address (with postcode):
1. 2. 3. 4. 5. !
1. 2. 3. 4. 5. 6.
7. 8. USB
User Manual Magnetic Wireless Car Charger Holder This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RadiationExposureStatement ThisdevicecomplieswithFCCRFradiationexposurelimitssetforthforanuncontrolled environment.Thistransmittermustnotbecolocatedoroperatinginconjunctionwithanyother antennaortransmitter.Duringtheoperationofdeviceadistanceof15cmsurroundingthe deviceand20cmabovethetopsurfaceofthedevicemustberespected.