FCC ID: 2AWL2-JR-ZS219 Wireless Charging car holder

JR-ZS219-() 70x100mm 128g Component assembly Air outlet Component assembly Dashboard Step 1:

Connect the air outlet clamp accessories to this product, first put the rolling ball into the nut Bolt inserted into the back of equipment Step 4:

Press the round card position switch, the support rod can swing 180 degrees back and forth to adjust the visual angle 4

3. Insert the mobile phone for use. The mobile phone model supporting wireless charging will automatically sense the charging, and the device will automatically clamp the back three axes of the mobile phone when sensing the charging. Step 1:

Connect the instrument panel accessories to this product, the ball connection method refers to the air outlet style Fix the accessory base in a suitable position on the instrument panel, press the vacuum switch to fix the device 1 Step 2:

Step 2:

Tighten the nut clockwise 3 Step 3:

Turn on the support arm switch, stretch the support arm to adjust the height of the support rod 3 Instructions 1. Use the type-C charging line in the package to connect the bracket with the car charging Please charge with QC3.0 fast charging vehicle 2. Press the side clamp arm tension switch to open the clamp arm 4. Take out the mobile phone, press the side clamping arm tension switch to open the clamping arm and pull out the mobile phone Wireless charging sensing area Mobile phone clamp arm Clamp arm tension switch Type-C input interface Adjustable bottom bracket Air outlet clamp Step 3:

Open the clamp switch to open the clamp, insert the air blade at the air outlet, and clamp the fixed device of the air blade 1 2 1 2 Electric lock and unlock QI fast charge Three axis linkage compatible with 4.7-6.8 inch mobile phone

2 2 User Manual Thank you for choosing this product, please read the instructions carefully before using!

4

1

3 3

Parameters BrandJOYROOM ModelJR-ZS219 Name: Three-axis electric wireless charging car holder Material: ABS + PC Input: 5V 2A 9V 2A 12V 1.5A Output: 5W/7.5W/10W/15WMAX Charging distance: 8MM Input interface: Type-C Applicable mobile phone size: 4.7-6.8 inch mobile phone Applicable scenario: air outlet instrument panel Status indicator Status When connected to power Display Blue light When wireless charging Blue light flashes slowly When Abnormal object detected Blue light flashes quickly Warning 1. Do not dismantle or modify the product 2. Do not store product in wet conditions 3. Do not keep or use the product near heat sources 4. Do not let water or any other liquid flows into the inside part of the products interface.This would cause damages to the product 5. Do not install the wireless car charger over an air bag cover or within the air bag deployment zone 6. Make sure to remove metallic, magnetic protective case or chip cards like bank cards,etc from your device when charging. 7. While charging,the charger may heat up. This is normal an should not affect chargers performance.If the charger feels hot to the touch during this charging process,remove the device from the charger and allow it to cool down before restarting the charging process 8. Avoid using bent or damaged USB cable Warranty Card Model Purchase Date Distributor Invoice Date Tel. Customer Name Zip code After-sales service instructions Dear users, thank you very much for using our products. In order to protect your rights and interests, it is clear that distribution agents and companies should bear the responsibility of product maintenance, replacement and return. Please read the following items:

1. Product warranty card, is our products to provide free after-sales service during the warranty period of the necessary proof. 2. According to who sells who is responsible for the three guarantees principle, the product quality problem with (product guarantee card) contact with the dealer, by the dealer to provide the service to the customer, my company provides the service support to the dealer. 3. The company undertakes that if a quality problem occurs within seven days from the date of sale (the date is valid, the date of the bill shall prevail), the customer may choose to return the goods to replace the goods and maintain the warranty. Products beyond warranty quality problems enjoy life-long maintenance

(each after-sales service points only charge for component materials); customers

4. Below cases are not included in the warranty

Exceed the service time

Damage caused by failure to use, maintain or keep in accordance with the requirements of the instructions for the use of the product

A person who is not responsible for warranty will remove and cause damage

No warranty card

(The warranty card) where the contents of the card are not in accordance with the physical object of the product or are altered

Caused by force majeure 5. JOYROOM all rights reserved.

1

2

0

2AWL2-JR-ZS219 Size:25mm*15mm Product name:Wireless Charging car holder Model name: JR-ZS219 FCC ID: 2AWL2-JR-ZS219

SHENZHEN NITO POWER SOURCE TECHNOLOGY CO.,LTD. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2020-6-17 SUBJECT: FCC Application for (FCC ID: 2AWL2-JR-ZS219) To Whom It May Concern:

We, the undersigned, hereby authorize Alisa Feng in Shenzhen Huaxia Testing Technology Co., Ltd at 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Shenzhen Huaxia Testing Technology Co., Ltd on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section.

(Must be signed by the person that is listed on the FCC Website) Sincerely, Signature:

Contact name: Zhou Ping 518129 Company name: SHENZHEN NITO POWER SOURCE TECHNOLOGY CO.,LTD. Address: 201,No.8 Building,Jinfanghua Electricity Industrial park,Bantian St.,Longgang Dist., Shenzhen, China Date: 04/17/2018 VCB_F-01: Operating Procedures Form FCC Authorization v02 Page 1 of 1

SHENZHEN NITO POWER SOURCE TECHNOLOGY CO.,LTD. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AWL2-JR-ZS219 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type 1. Block Diagram, 2. Schematics, 3. Operational Description File Name 1. 2AWL2-JR-ZS219 -Block diagram 2. 2AWL2-JR-ZS219 -SCH 3. 2AWL2-JR-ZS219 -Operational description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, we also request temporary confidential treatment of information accompanying this application as outlined below for an initial period of xxxx (ie- 45, 90 or 180) days:

Exhibit Type N/A File Name N/A Signature:

Contact name: Zhou Ping Company name: SHENZHEN NITO POWER SOURCE TECHNOLOGY CO.,LTD. Address: 201,No.8 Building,Jinfanghua Electricity Industrial park,Bantian St.,Longgang Dist., Shenzhen, China 518129 Date: 04/17/2018 VCB_F-01: Operating Procedures Form FCC Confidentiality v02 Page 1 of 1

Zhejiang PDW Industrial Co., Ltd. Model Confirmation Letter We, SHENZHEN NITO POWER SOURCE TECHNOLOGY CO.,LTD., certify the product:

Wireless Charging car holder Model No.:JR-ZS219 JR-ZS220 JR-ZS212 JR-ZS216 JR-ZS213 JR-ZS214 JR-ZS215JR-ZS240 JR-ZS241 JR-ZS242 JR-ZS243 JR-ZS244 JR-ZS245 JR-ZS246JR-ZS247JR-ZS248 Their circuit design, layout, components used and internal wiring are the same.Only the brand and model name are different. Signiture:

Grantee Contact: Zhou Ping Company Name: SHENZHEN NITO POWER SOURCE TECHNOLOGY CO.,LTD. Date:2020-06-11