ShenzhenNuboMedTechnologyCo.,Ltd. Tangtou1stRd.,SkyworthInnovationValley#5,
BuildingC,6F,Shiyan,Baoan, Shenzhen
Tel:755-33079022Fax:0755-36693461Ext806
www.nubomed.com
NuboMed Mobile Medical Cart S3000 Series User Manual
ShenzhenNuboMedTechnologyCo.,Ltd. Tangtou1stRd.,SkyworthInnovationValley#5,
BuildingC,6F,Shiyan,Baoan, Shenzhen
Tel:755-33079022Fax:0755-36693461Ext806
www.nubomed.com
1Introduction NuboMed Mobile Workstation was specifically designed for the Medical professionals; incorporated with embedded PC, wireless communication module, intelligent power management, and mobile management technology. Its suitable for various of bedside working environments, whether it be outpatient, emergency room, surgical or ICU and inpatient areas. It makes mobile rounds, nursing, supervision, detection and monitoring a reality for the medical personnel.
ShenzhenNuboMedTechnologyCo.,Ltd. Tangtou1stRd.,SkyworthInnovationValley#5,
BuildingC,6F,Shiyan,Baoan, Shenzhen
Tel:755-33079022Fax:0755-36693461Ext806
www.nubomed.com
Disclaimer: product can be customized, actual unit may vary in configuration.
2Instruction a. Power On/Off Power On To turn on the workstation, press and hold the power button for 2 sec. Power indicators will be lit and PC will be turned on Power Off To turn off the workstation, press and hold the power button for 2 sec. Power indicators will be shut off and PC will be shut off.
ShenzhenNuboMedTechnologyCo.,Ltd. Tangtou1stRd.,SkyworthInnovationValley#5,
BuildingC,6F,Shiyan,Baoan, Shenzhen
Tel:755-33079022Fax:0755-36693461Ext806
www.nubomed.com
b. Intelligent Control/Display Panel
If unit is without the optional hot swap-able battery, both indicator shows the remaining power of the main battery.
ShenzhenNuboMedTechnologyCo.,Ltd. Tangtou1stRd.,SkyworthInnovationValley#5,
BuildingC,6F,Shiyan,Baoan, Shenzhen
Tel:755-33079022Fax:0755-36693461Ext806
www.nubomed.com
Note: When the red light turns on, please charge the unit. When red light disappears, it indicates the battery is over 7% charged. While charging, indicator lights will flicker. When charging completes, indicator lights will remain lit. When red light flickers, please charge immediately to prevent computer shut down.
c. Cabinet and Accessories
ShenzhenNuboMedTechnologyCo.,Ltd. Tangtou1stRd.,SkyworthInnovationValley#5,
BuildingC,6F,Shiyan,Baoan, Shenzhen
Tel:755-33079022Fax:0755-36693461Ext806
www.nubomed.com
Thecabinetbodywasmadeofaluminumalloy,whichisanti-abrasion,anti-rustandanti-corrosion.
Handlesaresmoothandthedrawersareallequippedwithautoretractiontrack.Standardmodelcomeswith
4drawers.Consumablesuppliessuchassyringes,cottonswab,medicinescanbestoredinthe10cmheight
drawers.Infusionpouches,largesizeitemscanbestoredinthe20cmheightdrawers.Alldrawerplacement
andsizecanbecustomizedpercustomerrequest.Drawerscanbesecuredwiththelockingmechanismon
theright.
ActualAccessoriesshapeandsizecanbecustommadepercustomerrequest
d. Lockable Caster Two front casters come with braking mechanism, press down to lock the caster, lift up to unlock. e. Expandable Work Surface ShenzhenNuboMedTechnologyCo.,Ltd. Tangtou1stRd.,SkyworthInnovationValley#5,
BuildingC,6F,Shiyan,Baoan, Shenzhen
Tel:755-33079022Fax:0755-36693461Ext806
www.nubomed.com
Push inwards slightly to pop out the extra work surface; Push inwards to lock the surface back in. f. Monitor Adjustment Positions of the LED Monitor can be adjusted up or down, 360 degrees and leans forwards or backward Height Adjustment: Press down or lift upwards to adjust height 360 degrees turn: turn left or right to adjust Inclines forward or backward ShenzhenNuboMedTechnologyCo.,Ltd. Tangtou1stRd.,SkyworthInnovationValley#5,
BuildingC,6F,Shiyan,Baoan, Shenzhen
Tel:755-33079022Fax:0755-36693461Ext806
www.nubomed.com
3Attentions Service Please do not tamper with the work station by unscrew and open up the enclosure in any way without the specific instruction and authorization by NuboMed personnel. Only authorized and trained NuboMed service personnel are to repair the unit. Electrical Shock Warning NuboMed workstation is an electrical computer equipment with the potential of creating hazardous electrical shock to human. Please do not tamper with product without proper NuboMed authorization. Please do NOT operate the unit in or close to any liquid If the workstation is doused with any liquid, please unplug or shut down the unit immediately and do NOT turn back on until dry. Initial Start Up Mode Please charge continuously for 24 hours before first time usage to ensure the maximum output and extend the life of the battery. Storage Please keep the workstation in a well ventilated, dry, room temperature area without any corrosive substance nearby. Do Not store lying down, upside down or on top of one another. If the unit are to be sitting idle without usage for an extended periods of time, please disconnect the unit from any power source, do not keep it on charge mode. Please also ensure to recharge every month to prevent the battery from damage. 4Troubleshoot ShenzhenNuboMedTechnologyCo.,Ltd. Tangtou1stRd.,SkyworthInnovationValley#5,
BuildingC,6F,Shiyan,Baoan, Shenzhen
Tel:755-33079022Fax:0755-36693461Ext806
www.nubomed.com
Symptom Analysis Solution Charge the unit for 24 hours and try again Unplug the connector or try a different 220V wall plug Turn the LED on by pressing the power button / reconnect all the cables Please contact your IT personnel to reload the system and or install anti-virus software Please contact your IT personnel to reset or repair the wireless network Turn back on the wireless network hardware Please contact your IT personnel to confirm the password Please contact your IT personnel Power lift: please follow the instruction to disable the accidental touch feature by touching the unlock button Manual Lift: make sure the adjustment handle was pulled upwards before lifting or pushing downwards Push down the caster lock to activate System wont turn on System wont charge System turned on but shows a black screen or without signals Computer wont boot into the operating system Wont connect to the wireless network System was not used for extended periods of time, battery is locked into dormant mode Power plug was not plugged in properly or was not plugged into a 220V wall plug LED monitor might be turned off, or either one of the power/HDMI/VGA/DVI cables are not properly connected System files damaged or lost Possible Virus issues Problem with the wireless network Wifi Network Card was off Wifi password was incorrect Unit height cannot be adjusted Height adjustment function was Network requires a fixed MAC address or allocate an IP locked Workstation wont stay put in Caster lock was not used place If problem persists, Please contact your IT personnel or NuboMed service personnel 5. Packing List Name Mobile Workstation and accessories LED Monitor and cables User Manual Product Inspection and Warranty Certificate Tools Quantity 1 unit 1 set 1 copy 1 copy 1 set ShenzhenNuboMedTechnologyCo.,Ltd. Tangtou1stRd.,SkyworthInnovationValley#5,
BuildingC,6F,Shiyan,Baoan, Shenzhen
Tel:755-33079022Fax:0755-36693461Ext806
www.nubomed.com
FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Shenzhen NuboMed Technology Co., Ltd. (Trademark) www.nubomed.com Official Wechat Channel: Nubomed Service Hot Line: 0755-33079022