1 Bluetooth receiver Product description This product is a Bluetooth music receiver (speaker) is a high-tech product or mobile phone can receive wireless transmitter with Bluetooth function on the music. The music section of the receiver can be used for almost all of the input audio receiver with plug, including car audio device. In the family can receive audio or audio system to the vehicle your smart mobile phone and MP3 received music. Enjoy the music, talking through car audio solutions, phone calls and music by the intelligent mobile phone. Just press this button to hands-free calls, stored in the phone to enjoy the music even broadcasts Internet. The product with a built-in echo cancellation microphone, only one button you can easily switch in music and phone. Charge description For the first time, it is suggested that the battery is full, and the charge time is 2-3 hours. 1 the mini-USB input interface is connected to the end of the USB cable provided by the end of the cable 2 the other end of the USB cable is connected to your computer, notebook or USB with a 5V output of the charging interface, then the Bluetooth music receiver LED lights turn red, said it is charging, full of power after the red light. Bluetooth operation instructions 1 long press the music receiver on the button for 1 second, Bluetooth to enter the ready pairing state, the mobile phone Bluetooth function to open, the phone will search for the product of the device name "Receiver BT". 2 select "Receiver BT" and connect it to some of the mobile phone will require the input "0000"
of the connection password 3. The connection is completed, the phone will display the BT receiver is connected, at which point you can perform various operations, the next boot only short press the start button for 1 second, blue lights up namely, let go, Bluetooth receiver will automatically return even on a mobile phone. The Bluetooth receiver only at the same time even on the phone. When you need to connect to another one phone, in a power-off state directly press 3 seconds to prepare to enter the pairing state, at this time can be used in a mobile search and connect) 4 once the pairing is successful, the device turns off the power supply, and the next time the boot will automatically return, without the need to re pair the manual!
5 play mobile phone music (A2DP mode) 6. To complete the connection, playing mobile phone inside the music, mobile phone inside the broadcast of all sounds by the audio wire connected to the car audio equipment, from the car audio play out (for example: music phone, Bluetooth phone, navigation mobile phone broadcast voice. Please according to the next steps:
7.1.0: audio line using the provided and joint, connecting the Bluetooth music receiver to your home or car stereo audio equipment. Please confirm the 7.1.1 transmitter (Bluetooth audio receiver, hand machine, and other related equipment) has been opened and is paired with Bluetooth music receiver, and the equipment in the range of 10m 7.1.2 Bluetooth audio receiver on the LED lamp turn blue and flashing slowly, which said it had successfully connected 7.1.3 when playing music, the music will be to the Bluetooth music receiver via Bluetooth wireless transmission. Let you enjoy the music!
Note: if you can't listen to music 2 A: please make sure that your stereo system has been connected to the Bluetooth receiver B: check and make sure that your audio volume is not set to a minimum or a mute state. Bluetooth call 1: when your mobile phone is used by default for Bluetooth microphones, telephone access can through the built-in mic hands-free calls. 2: when the phone calls, click open key can receive voice calls. Press once hung 3: phone call completion after, automatic cut the phone before the state. 4: with the Bluetooth device is disconnected and a Bluetooth receiver 5 minutes will automatically shut down Indicator light display Equipment status LED status Pair or build connection Blue LED lights flash 2 times per second. Has been successful and is playing Blue LED lights flash once every 2 seconds Sleep mode (standby) Blue LED lights flash once every 2 seconds Charging Charging, red LED often bright, full of electricity, red light off Difficult solution Bluetooth music receiver connection is built on the basis of the pairing, the connection interruption may be due to several reasons:
Distance equipment more than 33 feet (10 meters), or any other obstructions (such as: middle wall, furniture and so on) B. one or two have been closed down, it may be because no power. C. connection is not within the stipulated time, equipment within 5 minutes no connection timeout will automatically shut down, re open the device to connect, in accordance with the following steps:
1 to restart the music receiver and transmitter 2 after the restart reconnect, pairing 3 again to the music receiver and transmitter charging 3 Packaging accessories
* 3.5 turns 3.5 line line
* Bluetooth music receiver
* USB charging cable
* instructions Technical parameters
* support for Bluetooth A2DP Audio Music Player
* supports Bluetooth hands-free
* working hours: can be as long as 8 hours, standby energy saving * frequency response: 20Hz-15Khz
* Bluetooth version: v4.1+EDR
* Bluetooth transmission distance 10m * Bluetooth frequency 2.4GHz
* power charge: 5V/500mA NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.