IMPORTANT:
Please read this manual before using the unit to ensure safe and proper use. The unit will generate the magnetic/electric field; never place any medical equipment; watches; credit card; magnetic record card or any magnetic sensitive products close to the unit. Only phones with built-in QI wireless system can recharged by this unit. For details, please refer the users manual of your phone. The design of the unit is indoor use. Never spill or spray any type of liquid on the product. Do not use this product near water and moisture, for example: near a bathtub, washbowl, kitchen sink or laundry tub; in a wet basement; or near a swimming pool. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Clean only with dry cloth. Unplug this product from external USB Charging Devices before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry closth for cleaning. Do NOT place any heavy object on the Charging Surface. It may damage the unit. When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original parts. Unauthorized substitutions may result in fire or electric shock or other hazards. 1 FCC Statement Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which Increase the separation between the equipment and receiver. the receiver is connected. Consult the dealer or an experienced radio/TV technician for help The device must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2 LOCATION OF CONTROLS:
1 2 1. Wireless Charging Surface 2. Micro USB Port 3. Blue & Red LED Indicator 3 3 OPERATION:
1. Connect the Micro USB Plug from the supplied USB connection cable to the Micro USB Port on the unit as illustrated below:
2. Connect the full size USB Plug to the USB Port on your USB Charger (not included) as illustrated below:
3. The Blue & Red Indicators on the unit will illuminate & blink a few seconds, then the Blue Indicator turn off. 4 4. Place your cell phone onto the center of the charging surface as illustrated below until the Red Indicator turn off, then the Blue LED Indicator will illuminate
(or, the charging icon appears on the cell phones display) to start charging.
(Note: If the location of the cell phone is incorrect, charging will NOT proceed.) 5. Wait until your cell phone finished charging as usual, the Blue LED Inidcator will turn off (or ,the full charging indicators appear on your cell phones display) Notes:
1. To charge a cell phone with this Charger, the cell phone must be compatible with the Qi standard for wireless charging. 2. During charging, if the cell phone has a cover or case, it may disturb or prevent the wireless charging function of the cell phone. 3. The charging transmission distance of the unit is less than 8mm, the thickness of cell phone cover or case can NOT extend 8 mm. 4. Back of phone must be void of attachments or accessories to charge wirelessly. 5. To save energy, disconnect the Charger from the USB Charger if not using it for an extended period of time. 5 GENERAL SPECIFICATION:
5V/2A DC 5W Up to 8 mm Input:
Output:
Transmission Distance:
ACCESSORIES:
1X Owners Manual 1X USB Connection Cable (For Charging Only) SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE WITHOUT NOTICE 6