FCC ID: 2A3OF-TA32 Thermal Imaging Camera

TA32 THERMA L IMAG ING CAMERA Operation manual 1 To users Usage and Precautions Dear user TA Series products can be used on day time and at night. Please use 3.7V lithium Thank you very much for choosing PARD infrared thermal imaging device. ion rechargeable battery. Please read this manual carefully before your first use;

User needs to remove the protection tape at battery, and charge battery until After you read, please keep this manual properly for easy reference in case of full before first time use. problems during use afterwards. Please read this user manual carefully and be sure to follow the procedures elaborated in this manual to avoid components damage caused by improper operation. If this manual has any amendments due to any software version upgrade or any other reasons, PARD will not provide separate notice to individual users, users are recommended to visit PARD official website periodically for update information. Device maintenance or repairing work should be conducted by PARD official authorized technicians, DO NOT open device case by any unrecognized technicians. In case of failure, please contact your domestic Distributors at once for after sales service. If any unauthorized mechanical work applied to the device will treat as abandoning the warranty service. Do not have the device focus directly at high-intensity radiation sources such as the sun, electric welding and strong laser. Detector will be damaged under direct 2 3 focused at strong light source, and such corresponding defects will not under warranty service. Please keep the device in temperature between - 40 C to 60 C. Original packaging must be used and cannot open during transportation. Recommend to keep the device in a place of cool, dry and ventilated environment without strong electromagnetic field. Avoid oil stains or any kinds of chemicals from contaminating and damaging the lens surface. After use, please put on the lens cover at once. Indicator light

+ Key Menu Button

- Key Power Button Objective focusing wheel Eyepiece focusing wheel Red dot indicator Data storage Battery Compartment Cap 4 5 1Product Overview 2 Performance parameters This product is a compact and lightweight multifunctional thermal imaging device. Proving users high sensitivity, high refresh rate and high stability, which suitable to use in natural observation, outdoor hunting and exploration, security monitoring and marine operation, night patrol in different occasions. Please do the following before using this product:

A. Open the package box, take out the equipment and accessories. B. Check and confirm there has no missing parts. C. Check the equipment body, objective lens, operation button, etc. are not damaged. D. Ensure all objective lenses and eyepieces clean and can be used properly. Note: if any parts are missing or damaged, please contact our after-sales department at once. Model Detector NETD Camera lens Field angle Dimension (mm) Detection distance Weight

(excluding battery) 40mK 19/25/35mm 50Hz 1.7/2.2/3x 145/153/159*68*44 0.8/1.2/1.5km 288/300/328g 25mK 19/25/35mm 50Hz 145/153/159*68*44 1.2/1.6/2km 288/300/328g 25mK 25/35mm 30Hz 2/2.8x 17.5/12.5 153/158*68*44 1.5/1.8km 300/328g TA37 TA32 TA62 17m 384*288 12m 384*288 12m 640*480 Frame rate Optical Magnificati on 19.5/14.9

/10.7 2.7/3.5

/4.5x 13.8/10.6

/7.5 General parameters Digital zoom 1/2/4/6/8x 1m-

Exit pupil distance 15mm 5D Battery Li18650*1 Eyepiece resolution 1024*768 OLED

30C +60C Transmission mode WiFi/HDMI IP67 Storage type TF Card

(max128G) Frame rate 30 fps Battery life 5H(Max) Video format MP4 AL6061 + Plastic Voltage 3.7V 1440*1080 Charging port type TYPE-C Image mode White Hot/RedHot/BlackHot

/Edge/Sky/IronHot Focusing range Operating Temperatur e Video resolution Diopter adjustment Protective performanc e Casing material 6 7 3Installation and basic operation methods For the first time you use the device, follow the below steps: install the battery 3.Press the [power key] to start up. In the power on status (after 15 seconds), press the [power key], internal screen will enter in sleep mode, press [power key]

again to switch on the screen, long press [power key] to shut down.

> eyepiece focusing > objective focusing. Install the battery Eyepiece focusing 1.Eyepiece focusing, also known as diopter adjustment, aim at enable users with different vision conditions can clearly see the displayed content. 2.Turn the focusing wheel until you can see the text or icon on the screen clearly. 3. Please note that the image is not clearly visible after eyepiece focusing

(the image adjustment, as long as the words on the display screen are clearly visible may not be clear when the objective lens is not well focused), this procedure is done. push 1.Please use 18650 lithium ion rechargeable 3.7V battery. 2.Press the battery compartment cover to open, install the battery positive electrode towards the front objective lens. Put on the battery compartment cover and well fasten it. 8 9 4.Thermal imaging has the least focusing distance. It is normal an object may not be able to see sharply within 3 meters. 5.Objects behind glasses cannot be detected. Eyepiece focusing wheel Key and interface operation method There are two controlling key arrangements at the thermal imaging device, which are 1: non menu mode (shortcut key mode) Objective focusing wheel Objective focusing focusing (diopter adjustment) completed. 1.Before the objective lens focusing, please make sure you have the eyepiece 2: menu mode (enter normal setting mode) 2.Focus at the target you want and adjust the focusing wheel of the objective lens until you can see the target image sharply. 3.Generally, the focusing position of the objective lens is placed at objects located far away from you. Non menu mode (shortcut)

(15 seconds after startup) After startup, without pressing the [menu key] machine is in non menu mode 1.Press [power key] to sleep / wake up the device; long press to shutdown. 10 11 2.Press the [+ key] to switch magnification function : 1,2,4,6,8 times. When the picture in picture function is on, press the [+ key] to switch between magnifications of 1,2,4,6,8; long press to enter the playback function menu. In the playback interface menu, press [+ key] [- key] to switch the video /

picture mode in the TF card. When the interface is in video, press [menu key] can play video. Press [+ key] [- key] to adjust the playback speed accordingly. When playing video, press [menu key] to pause, press [+ key] [- key] to play by frame, long press [menu key] exit to the previous folder to switch files, and long press [menu key] again exit to the display interface. 3.Press [menu key] to enter the menu interface; long press to turn on / off the video recording function. 4.Press [- key] to turn on / off the red dot indicator; long press to switch display mode. Menu mode (setup mode) Press [menu key] to enter the menu setting mode, and the interface is shown as pictures below (at this time, the shortcut key is not function) Menu Image Setting Display Setting Magnify Center Position Picture In Picture Shutter Correction Hot Track Auto Recording Loop Recording Long press MENU button to exit 1/3 12 13 1. Image setting: press [+ key] [- key] move the cursor to the image setting option, and press [menu key] to enter the sub menu, press [menu key] to switch the contrast / brightness / sharpness / mode options, and press [+ key] [- key] to adjust the target option value. Long press [menu key] to exit. Image default settings:

The contrast value is 90, the brightness value is 65, the sharpness value is 2, and the mode is 0. 2. Display setting: press [+ key] [- key] to move the cursor to the display setting option, and press [menu key] to switch the contrast/ brightness / color option, press [+ key] [- key] to adjust the option value. Long press [menu key] to exit. Default value:

contrast is 3, brightness is 3, and color temperature is 3 3.Magnify Center Position: press [+ key] [- key] to move the cursor to the magnify center position, press [menu key] to switch the X / Y axis option, press /

long press [+ key] [- key] to adjust the option value. Long press [menu key] to exit. 4. Picture in picture: press [+ key] [- key] to move the cursor to the picture in picture option, and press [+ key] [- key] to select on/off the shortcut [+ key] picture in picture function, press [menu key] to save and exit. 5.Shutter Correction: press [+ key] [- key] to move the cursor to the shutter correction option, and press [menu key] to enter picture correction. Manual picture correction can obtain better picture effect. 6. Hot Track: press [+ key] [- key] to move the cursor to the hot track option, and press [menu key] to enter sub-menu. Press [+ key] [- key] to switch on and off the thermal imaging tracking function. Press [menu key] to confirm and exit. 7.Auto Recording: press [+ key] [- key] to move the cursor to the automatic video recording option, and press [menu key] to enter the sub-menu. Press [+ key] [-

key] to select on / off automatic video recording option, press [menu key] to confirm and exit. 8.Loop Recording: press [+ key] [- key] to move the cursor to the loop recording option, press [menu key] to enter the sub-menu, press [+ key] [- key] to select cyclic recording off / 3minutes / 5minutes / 10minutes, press [menu key] to confirm and exit. 14 15 9. Date Stamp: press [+ key] [- key] to move the cursor to the date stamp option, press [menu key] to enter the sub-menu, press [+ key] [- key] to select on /

off date stamp, and press [menu key] to confirm and exit. 10:15 11. Beep Sound for HDMI: press [+ key] [- key] to move the cursor to the beep sound for HDMI option, and press [menu key] Enter the sub-menu, press [+ key] [-

key] to select on / off HDMI prompt tone, press [menu key] to confirm and exit. Menu Date Stamp Record Audio Beep Sound for HDMI WiFi Language Date/Time Format 12.WiFi: press [+ key] [- key] to move the cursor to the WiFi option, press

[menu key] to enter the sub-menu, and press [+ key] [- key] to select on / off WiFi function, press [menu key] to confirm and exit. The menu interface cannot be opened after the WiFi function is turned on. Please turn off the WiFi hotspot by long pressing [+ key]. WiFi account is a string of characters starting with PARD, and the password is Blind Pixel Compensatin Long press MENU button to exit 2/3 12345678. 10. Record Audio: press [+ key] [- key] to move the cursor to the record audio option, and press [menu key] to enter the sub-menu, press [+ key] [- key] to select on / off recording audio, press [menu key] to confirm and exit. 13.Language setting: press [+ key] [- key] to move the cursor to the language setting option, press [menu key] to enter the sub-menu, press [+ key] [- key] to select "English" / ""Franais" /"Espaol" /"Portugus" "Deutsch"/ "Italiano"

/""/"Cesky" language, press [menu key] to confirm and exit. 16 17 14.Date/Time: press [+ key] [- key] to move the cursor to the date/time, and press [menu key] to enter the sub-menu, press [+ key] [- key] to adjust the setting time value, press [menu key] to switch options, and long press [menu key] to exit and save. 15.Format: press [+ key] [- key] to move the cursor to the format option, press

[menu key] to enter the sub-menu, press [+ key] [- key] to select Cancel / confirm, and press [menu key] to confirm and exit the menu interface.

"Formatting will delete all data", please consider carefully before you confirm!

Data cannot be recovered after deleted. 16. Blind Pixel Compensation: press the [+ key] [- key] to move the cursor to the blind spot repair option, and press the [menu key] to enter. You can see the prompt. Please put the lens cover on before blind spot repair, press the [menu key] to start blind spot repair, which will be completed within ten seconds. After the repair is completed, you can choose to save or cancel. If you cancel blind spot repair, long press the [menu key]. Menu Default Setting Version Long press MENU button to exit 3/3 17.Restore factory default setting: press [+ key] [- key] to move the cursor to the restore default setting option, press [menu key] to enter the restore default setting page, press [+ key] [- key] to select Cancel / confirm to restore the default setting, press [menu key] to confirm and exit. 18 19 4Warranty description Thank you for purchasing PARD product. During the warranty period, we will provide you a quality after-sales service, in accordance with this warranty clause. 1 Warranty policy PARD guarantees users of this product can get effective warranty under the following conditions.

(1) This warranty card shall be provided at the same time.

(2) During the warranty period, faults caused under normal operation, not man-made damages, shall be repaired and replaced free of charge. menu. 2 Warranty limitations When product is damaged and cannot be used due to the following reasons, will not within the scope of warranty.

(1) Disassemble the machine by yourself. In case of failure, please contact the manufacturer at once. Maintenance, modification or product sealing sticker rupture without the approval of PARD are not within the scope of warranty.

(2) Damage caused by human factors or accidents, including use under abnormal working environment, damage caused by man-made failure to use and install not according to the instructions, etc., are not within the scope of warranty.

(3) PARD reserves the right to modify and interpret the terms in this user 20 21 5After sales support 6Packing Contents PARD provides users with after-sales support services for the company's products. If you need after-sales service support, please log on to our official website www.pard-tech.com/support to fill in and submit the information. We will get back to you within one working day. In order to provide you with better service, we need you to fill in and submit the following information:

1. Where you bought the machine 2. Your country/name/email address/telephone number 3. Machine models that need after-sales support 4. The SN code of the machine 5. Describe the problem encountered Item No. Packing Contents Quantity Remark Thermal imaging device 1 2 3 4 5 6 7 8 9 Shoulder bag Hand strap Type-C cable User manual Warranty card Cloth bag Lens cap Li-ion 18650 3.7V rechargeable battery 1 1 1 1 1 1 1 1 1 22 23 Warning:

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. In normal use, the wifi module away from the human body at least 5mm Telephone+86-755-29484438 Websitewww.pard-tech.com Add:B78,18/F,Guangyin building,38 Futian South Road, port community, Futian street, Futian District, Shenzhen

Label location Label size25*40mm Label sample Thermal Imaging Camera MODEL: TA32 FCC ID:2A3OF-TA32 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Shenzhen Pard Technology Co.,Ltd Agent Authorization Company: Shenzhen Pard Technology Co.,Ltd Address: B78,18/F,Guangyin building,38 Futian South Road, port community, Futian street, Futian District, Shenzhen Product Name: Thermal Imaging Camera Model Number(s): FSC-BW236, TA32, TA32-19, TA32-25, TA32-35, TA32-45, TA62-19, TA62-25, TA62-35, TA62-45, TB3-19, TB3-25, TB3-35, TB3-45, TC3-19, TC3-25, TC3-35, TC3-45, TS3-19, TS3-25, TS3-35, TS3-45, TS5-19, TS5-25, TS5-35, TS5-45, TS7-19, TS7-25, TS7-35, TS7-45, TS9-19, TS9-25, TS9-35, TS9-45, TZ3-19, TZ3-25, TZ3-35, TZ3-45, SC-19, SC-25, SC-35, SC-45, SU-19, SU-25, SU-35, SU-45,TA32-19LRF, TA32-25LRF, TA32-35LRF, TA32-45LRF, TA62-19LRF, TA62-25LRF, TA62-35LRF, TA62-45LRF, TB3-19LRF, TB3-25LRF, TB3-35LRF, TB3-45LRF, TC3-19LRF, TC3-25LRF, TC3-35LRF, TC3-45LRF, TS3-19LRF, TS3-25LRF, TS3-35LRF, TS3-45LRF, TS5-19LRF, TS5-25LRF, TS5-35LRF, TS5-45LRF, TS7-19LRF, TS7-25LRF, TS7-35LRF, TS7-45LRF, TS9-19LRF, TS9-25LRF, TS9-35LRF, TS9-45LRF, TZ3-19LRF, TZ3-25LRF, TZ3-35LRF, TZ3-45LRF, SC-19LRF, SC-25LRF, SC-35LRF, SC-45LRF, SU-19LRF, SU-25LRF, SU-35LRF, SU-45LRF We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Anna Ai Title:

manager Company: Shenzhen Pard Technology Co.,Ltd Date:

Nov. 15, 2021

FCC ID:2A3OF-TA32 Shenzhen Pard Technology Co.,Ltd Model Confirmation Letter We, (Shenzhen Pard Technology Co.,Ltd) certify the product: Thermal Imaging Camera, models: TA32, TA32-19, TA32-25, TA32-35, TA32-45, TA62-19, TA62-25, TA62-35, TA62-45, TB3-19, TB3-25, TB3-35, TB3-45, TC3-19, TC3-25, TC3-35, TC3-45, TS3-19, TS3-25, TS3-35, TS3-45, TS5-19, TS5-25, TS5-35, TS5-45, TS7-19, TS7-25, TS7-35, TS7-45, TS9-19, TS9-25, TS9-35, TS9-45, TZ3-19, TZ3-25, TZ3-35, TZ3-45, SC-19, SC-25, SC-35, SC-45, SU-19, SU-25, SU-35, SU-45,TA32-19LRF, TA32-25LRF, TA32-35LRF, TA32-45LRF, TA62-19LRF, TA62-25LRF, TA62-35LRF, TA62-45LRF, TB3-19LRF, TB3-25LRF, TB3-35LRF, TB3-45LRF, TC3-19LRF, TC3-25LRF, TC3-35LRF, TC3-45LRF, TS3-19LRF, TS3-25LRF, TS3-35LRF, TS3-45LRF, TS5-19LRF, TS5-25LRF, TS5-35LRF, TS5-45LRF, TS7-19LRF, TS7-25LRF, TS7-35LRF, TS7-45LRF, TS9-19LRF, TS9-25LRF, TS9-35LRF, TS9-45LRF, TZ3-19LRF, TZ3-25LRF, TZ3-35LRF, TZ3-45LRF, SC-19LRF, SC-25LRF, SC-35LRF, SC-45LRF, SU-19LRF, SU-25LRF, SU-35LRF, SU-45LRF Their electrical circuit design, layout, components used and internal wiring are identical, Only the name will be different . Signiture:

Grantee Contact: Anna Ai Company Name: Shenzhen Pard Technology Co.,Ltd Date: 2021-11-15

Shenzhen Pard Technology Co.,Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2A3OF-TA32 Date: Nov. 15, 2021 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Anna Ai Title: manager