FCC ID: 2AV6Y-CP80 Tablet

Product: Tablet PC Model: CP80 Input: 5V 2A 205-200028 CP80 IC: 28410-CP80 HVIN: CP80 Product: Tablet PC Model: CP80 Input: 5V 2A FCC ID:2AV6Y-P50 205-200028 1010

Wifi01 Wifi02 CP80

FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

connected. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Appendix FCC ID Label FCC ID:2AV6Y-CP80 Model: CP80 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Size for the label: 5mm X 5mm FCC ID: 2AV6Y-CP80 TB-RF-074-1.0

SHENZHEN ZHENYI INTELLIGENT TECH CO., LTD 701 Building A, Haohe Zhichuang, No.,10, Fuyuan, 2nd road Zhancheng Community, Fuhai Street, BaoAn District, Shenzhen, Guangdong, China Date: 2023-11-23 To:

Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern, The letter grants authorization for representative of SHENZHEN PEICHENG TECHNOLOGY CO.,LTD to apply for its own FCC identification number FCC ID: 2AV6Y-CP80 for the product that is the subject of the SHENZHEN ZHENYI INTELLIGENT TECH CO., LTD, FCC ID: 2A4IC-CP80, granted on 10/10/2022. The equipment is electrically identical. The only change being the label on the device. The original test results, technical information and relevant documents continue to be representative of and applicable to the changed equipment. Applicant/Grantee (Original Company) Name: SHENZHEN ZHENYI INTELLIGENT TECH CO., LTD Applicant/Grantee (New Company) Name: SHENZHEN PEICHENG TECHNOLOGY CO.,LTD New applicant Grantee Code (s): 2AV6Y New applicant FRN (s): 0029465119 Name of New Point of Contact to be in EAS Database: Jiefeng Lai E-mail address of New Point of Contact in EAS Database: sales11@sino-qps.com Please contact me if you have any question. SHENZHEN ZHENYI INTELLIGENT TECH CO., LTD 701 Building A, Haohe Zhichuang, No.,10, Fuyuan, 2nd road Zhancheng Community, Fuhai Street, BaoAn District, Shenzhen, Guangdong, China Contact name / title : Shaoyong Zhong/

Company: SHENZHEN ZHENYI INTELLIGENT TECH CO., LTD address : 701 Building A, Haohe Zhichuang, No.,10, Fuyuan, 2nd road Zhancheng Community, Fuhai Street, BaoAn District, Shenzhen, Guangdong, China Tel: 13714393771 Fax:

E-mail: zhenyizzb@sz-zzb.com 0755-26509195

SHENZHEN PEICHENG TECHNOLOGY CO.,LTD 5th floor,B building,Yingxin factory, Baotian 3rd Rd., Xixiang,Bao'an District, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-11-23 To whom it may concern:

We, SHENZHEN PEICHENG TECHNOLOGY CO.,LTD, hereby certify that the equipment for which authorization is sought FCC ID: 2AV6Y-CP80 is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and (d)(5) and (6). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature Jiefeng Lai Sales Representative SHENZHEN PEICHENG TECHNOLOGY CO.,LTD 3 0 V

, U

) i i

d n a

) i

) 5

) d

1 1 9

. 2 _ u q E d e r e v o C

l e d o m

_ 2 6

SHENZHEN PEICHENG TECHNOLOGY CO.,LTD 5th floor,B building,Yingxin factory, Baotian 3rd Rd., Xixiang,Bao'an District, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-11-23 To whom it may concern:

We, SHENZHEN PEICHENG TECHNOLOGY CO.,LTD the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AV6Y-CP80 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins current valid General Terms and Conditions

(AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title Company:

Address:

Phone:

Fax:

E-Mail:

Jiefeng Lai/Sales Representative SHENZHEN PEICHENG TECHNOLOGY CO.,LTD 5th floor,B building,Yingxin factory, Baotian 3rd Rd., Xixiang,Bao'an District, Shenzhen, China 0086-755-27334670 0086-755-29016980 sales11@sino-qps.com

SHENZHEN PEICHENG TECHNOLOGY CO.,LTD 5th floor,B building,Yingxin factory, Baotian 3rd Rd., Xixiang,Bao'an District, Shenzhen, China Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Attention: Application Examiner / Review Engineer Subject: Request to change in identification per section 2.933 of FCC rules Reference: FCC ID: 2AV6Y-CP80 To The Commission:

Date: 2023-11-23 This change of Identification request applies for a new FCC ID: 2AV6Y-CP80 as established in 47CFR 2.933(b) for a currently approved device. This application by SHENZHEN PEICHENG TECHNOLOGY CO.,LTD will establish a new FCC ID under SHENZHEN PEICHENG TECHNOLOGY CO.,LTD Grantee code for purpose of marketing. The original grant to SHENZHEN ZHENYI INTELLIGENT TECH CO., LTD will remain in effect. An authorization letter by SHENZHEN ZHENYI INTELLIGENT TECH CO., LTD attached. Per 2.933(b) 1. The original identification is FCC ID: 2A4IC-CP80 2. The original grant date is 10/10/2022 3. The equipment is identical to the original equipment. 4. The original test results are applicable and representative of this changed device. 5. Exterior photographs are included in this application. The following files are electronically submitted as attachments:

FCC ID label and label location External photographs Letter of Change FCC ID Authorization Letter for FCC ID User Manual Product Equality Declaration Sincerely, Clients name / title : Jiefeng Lai/ Sales Representative SHENZHEN PEICHENG TECHNOLOGY CO.,LTD 5th floor,B building,Yingxin factory, Baotian 3rd Rd., Xixiang,Bao'an District, Shenzhen, China Company: SHENZHEN PEICHENG TECHNOLOGY CO.,LTD address : 5th floor,B building,Yingxin factory, Baotian 3rd Rd., Xixiang,Bao'an District, Shenzhen, China Tel: 0086-755-27334670 Fax: 0086-755-29016980 Email: sales11@sino-qps.com

SHENZHEN PEICHENG TECHNOLOGY CO.,LTD 5th floor,B building,Yingxin factory, Baotian 3rd Rd., Xixiang,Bao'an District, Shenzhen, China Date: 2023-11-23 To:

Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern, Original FCC ID: 2A4IC-CP80; Model Number: CP80, CP80S, CP80K, CP81, CP81K, Q2, Q2S, Q2K New FCC ID: 2AV6Y-CP80; Model Number: CP80, This is to advise and officially, that we, SHENZHEN PEICHENG TECHNOLOGY CO.,LTD hereby declare that the product name is same and only FCC ID and model number difference as market requirement;

The original test results continue to be representative of and applicable to the equipment of the new FCC ID;

If you have any query, please feel free to contact me. SHENZHEN PEICHENG TECHNOLOGY CO.,LTD 5th floor,B building,Yingxin factory, Baotian 3rd Rd., Xixiang,Bao'an District, Shenzhen, China Sincerely, Clientsname/title:JiefengLai/ SalesRepresentative Company:SHENZHENPEICHENGTECHNOLOGYCO.,LTD address:5thfloor,Bbuilding,Yingxinfactory,Baotian3rdRd.,Xixiang,Bao'an District,Shenzhen,China Tel:0086-755-27334670 Fax:0086-755-29016980 Email:sales11@sino-qps.com

SHENZHEN PEICHENG TECHNOLOGY CO.,LTD 5th floor,B building,Yingxin factory, Baotian 3rd Rd., Xixiang,Bao'an District, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 2023-11-23 SHENZHEN PEICHENG TECHNOLOGY CO.,LTD acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought FCC ID: 2AV6Y-CP80 Name and company of U.S. agent:

ACT Lab LLC Physical U.S. address of agent:

3280 East 59th Street Long Beach, CA 90805 United States FRN of U.S. agent:

0033465568 Email address of U.S. agent:

shuber@act-lab.com ACT Lab LLC acknowledges their obligation to accept service of process on behalf of SHENZHEN PEICHENG TECHNOLOGY CO.,LTD. SHENZHEN PEICHENG TECHNOLOGY CO.,LTD with the FRN 0029465119 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. 5 0 V

, U

) 7

) d

1 1 9

. 2 _ t n e g A _ S U

l e d o m

_ 8 4 Sincerely, Signature Jiefeng Lai Sales Representative SHENZHEN PEICHENG TECHNOLOGY CO.,LTD Signature Scott Huber Senior Technical Director ACT Lab LLC