Pureatic Pureatic Shenzhen Pureatic Electronic Technology Co.,Ltd Address: 403,Shenian Industrial 6th Park,Dahe Area, Guanian Street Web:Longhua District Shenzhen City.China Emall: service@lexvss.com Instruction Manual Robot Vacuum Cleaner TYPE : V2-S005, Thank you for purchasing the Pureatic Vacoum Cleaner. f you have any quetions or concerns, please contact our customer service team at 'Service@
lexvss.com Pureatic Content
. Safety Instruction~
Product Composition:
Product Operations:
Charging Operations Maintenance. Sweeping Robot WIFI Instructions. Common Errors-
Specification
|. Mop install manual Pureatic 1.Safety Precautions 1.General Safety Although children See dysfunction, or those without relevant experience,use this product, but they need to be use ina safe manner under supervision or guidance and understa eee) Coreen Samer esa ae nan Sty battery or cradle. Users do not maintain Re meeetee tie nel ge ofthe charging stand meets the 1.2 Safety instructions
@ Read the safety precautions and operating instructions before operating the robot.
@ Please pay attention to the battery, power adapter, robot and all warnings in the instruction manual
(@ Please follow al instructions and instructions for use. Please note that seller is responsible for all non-routine maintenance.
(@ The damage caused by the wrong operation and the degree of damage are as follows.
| Ww. Indicates potently hazardous situation that, if not avoided, F198 | could result in death or serious injury at Indicates potential hazard that could esutin minor r moderate tention | injury it not avoided Label This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Pureatic Pureatic 1.3 About product safety matters ZAWarning QA this product is imited to the orignal battery cradle and adapter.
& SS Asoo notusethis product the host and accessor ofthe product are found ta be damaged, QX do not touch the power plug or product when your hands are wet, ZX do not use in a suspended environment without a guard bar. QX do not use the power cord to drag or move the product. do not allow the product to be near fre or near flammable, explosive, corrosive materials ute
&e gay | A\ donot et cothes or any part ofthe body har fingers, etc) Z\ Attention xe (Os
(Only use for iside Prevent inhalation Fishing the ground before use of water olor other Disordered wires to avid interference qui The dust machine works, se t Se Se Remove all consumables Grasp the front shel it the before use, bat is prohibited Please. Fold the body with both hands to lit vacuumeleaner. Non-original adaptation Is strictly Prohibited The charging base is Used to charge the machine oF will ause damage to the machine. 1.4 About Children Safety
* Not allow eid use alone Chiron are not allowed to play with the products packaging, otherwise it may cause suffocation 1.5 Battery A 4. This producti limited tothe manufacturer's battery;
2. The battery must be taken our when discarding 5. Ifyou need to replace the main battery please contact our aftersales service department if you use the wrong type of battery. 4f the battery leaks and accidentally let the liquid stick to the skinor clothing, immediately wipe it with a dry cloth Pureatic Pureatic EB 2.composition 2.1 Package List Nr Name. Main Unit(@atry Included) 2.2 View Bumper 2 5 ae : Fixed Area/ Power Button oe Manual: Side brush Mop for robot left brush vent
"Fie battery has installed inthe robot:
left wheel right wheel Pureatic Pureatic Dust box press button cover filter dust Box charge light adaptor input chip pole piece chip pole piece 2.3 Dust Box Installtion
( Take outwith the handler put in right place handler 2.4 Clean Side Brush sea cleaning brush to clean the rubbish on the side you have mace hal onthe side, use sisors to carefully cut the hai Lnstalation steps: Sweep the hole in the bottom ofthe base and press 2, Disassembly steps: Grab the brush on both sides ofthe sweep and pull tout witha litle force Tips:
1Lefore each use, please check whether the side sweep has been assemble, otherwise i will affect the normal cleaning of the vacuum cleaner, 2. Please distinguish the Lside brush and the side brush when installing the side brush, otherwise it wil affect the cleaning effect ofthe vacuum cleaner. Pureatic Pureatic El 3. Use Please take out the foam strip, and clean the area around the foam robot. en 3.1 Gound for Use. Scope of application prods are applicable to the following ground environment inapplicable Scope
) * Herston for winery ot 5 oreo
* Only use for isi,
* Cannot be used in a suspended environment without a protective fence. 4 | *Donotuse inet or fanmabl, expose or corse enironments. 3 + bo not low te prod to absorb unbumed grt or matches A * tt cannot be used to absorb toner and toner used in laser printers adele 3.2 Working State 1, Power off When the machine is of, press and hold the " auto " button the LED stops flashing and goes into standby state 2, Standing by The machine is in standby mode and both LEDs are on at the same time, State change:
1. the machine Is not operated, the machine will automaticaly shut down after 5 minutes of standby. 2, Short press the auto button once, the buzzer will sound once, and the automatic cleaning mode willbe entered after 2 delay of 35. 3. Press the fxed-time" button fora short time, the buzzer wil sound and enter the fixed-ime cleaning mode 4, Press and hold the auto button for 3 seconds, the buzzer will sound and the machine wil ut down, 5, Plugin the charger and the buzzer will sound and enter charging mode.
(Cc 10 Pureatic 3., Automatic Cleaning The machine isin the automatic cleaning state, and the automatic cleaning LED lights up State change:
-LPress the automatic or fixed-time button on the machine, the buzeer will sound and enter the standby mode. 2. Press the pat button, buzzer sounds 3 times, and enters the automatic spot cleaning mode 53. The faults detected, the error mode is entered, andthe machine alarms, 4. When the charger is plugged in, the buzzer will sound and enter the charging mode, Sp
{Auto cleaning route 4.Cleaning at fixed time In cleaning state at fixed time, LED light will be on when it cleans ata fixed time. Cleaning at Fixed time mode is suitable for cleaning a small dity area at home. The machine cleans this area ina bow shape, stops after the cleaning, and enters the automatic recharging mode, State change:
:LPress the automatic or fixed-time buttons an the machine, with the buzzer sounds it enters the standby mode, 2.When the battery power is low, buzzer will sound 3 times, then the machine will eter automatic recharge mode, 3. It detects the ful, it will enter the wrong mode and the machine wil alarm.
Pureatic 5. Charging mode In charging state, automatic cleaning mode, LED light will ash, indicating charging, When iis full of electricity, automatic cleaning LED light will be on. The following functions are available while robot is charging, Press the auto button or the spot button an the top ofthe machine, the buzzer will sound once, and the machine will enter the automatic cleaning mode or the spt cleaning mode after exiting the charging stand 12 Pureatic Pureatic a 4.Charging Operation 4.1 Put charger in right place In order help the machine to find the charging base in time, it is recommended to place charge base s-
moothiy on the side of the wall;and place any obstacles around the base within the area in front of 2 meters, and the left and right are within 1 meter 4.2 Self Charging When the battery is lower it will automatically start searching for charge base around the machine. 4.3 Manual charging Connect the power adapter directly to the machine and output.
:LFill the robot for 12 hours when charging for the first time. 2.For daily using, store the machine on the charging stand and, ensure that the charging stand is powered on. 3. the machine is not used for along time, charging the machine
{ullyturn off the machine, and store itin a dry and ventilated place, 13 5.Maintenance 5.1 Side brush I the side brush becomes dirty clean the side brush; ithe side brush is damaged, replace 5.2 Dust bin and filter Cleaning the dust bin and fier after using a following:
ey Tips
[After removing the dust bos, check the dust suction port af the box and robot, ifthe boxis block by foreign objects clean it. After cleaned, the filter and dust box must be fully dried, then can be re-used, otherwise it will affect the dust absorption effect and service life. 5.3 Clean the sensor and chip pole piece enti wipe the sensor andthe chip pote piece witha clearing tool ora sft oth. Tips: when there are foreign matter onthe charge pole pieces, please make sure it was cleaned up in time Pureatic 15 6.Sweeping Robot WIFI Instructions
=. Installation of Mobile WiFi APP 1. Sean below QR code with the mobile phone to download Smart Life APP (Applied to both Apple and Android stern) 3. Clik Add Device ater entering to below interface. click the + in the upper right comer, then click all devices" and select Sweeping Robot among all devices. Pureatic While the sweeping robot isin standby mode, press pont fixed button fora few seconds The buzzer wil sounds 2fimes, I enters the network configuration mode, the WIF LED flashes, cick indicator Fashes Quickly Contr
6.choose a WIF network and enter the network password and click the Confirmed button (Note:
only 2.46 WF network s supported) 72M is connecting 8, the WiFi connection is successful 16 Pureatic Pureatic 6.2 APP Control Operation Tips: APP transmission distance depends on your WIFI signal 11> Power Off Button
* Press Power Off Button, to turn off the robot. 2> Stand by
*Press the standby pause the robot into standby mode 3> Auto Button (/\)
* Press Auto, buzzer rings once, the robot will enter to auto cleaning mode. 4> Edge Button (
* Press Edge,buzzer rings once, the robot will enter to edge cleaning mode to clean along the edge of the wall. 5> Spot Button
* Press Spot button, buzzer rings once, the robot will enter to spot cleaning mode to start cleaning specific areas. 6> Auto Charging Button
* Press Auto Charging, buzzer rings once, enter to auto recharging mode. 7> Manual mode >) (You can choose to withdraw)
* Press manual button into human operation
(2)start/Pause
*To start cleaning.
* To stop current cleaning mode.
(2)Direction button <*>
"the robot will move according to selected direction. (press the left/right for once, choose the direction you want robot move,then press the foward/back) 8> Schedule Button
* Press Add Schedule, enter schedule page to set a cleaning time.
* Select a time you wanted and save it.
* Click save" on the top right corner,
* Click V' to cancel the schedule. 7 7.Common Errors Under the fault state the machine wil stop working. Automatic LED, LED light of fixe time will flash atthe same time, the buzzer will make an alarm. The alarm instructions areas follows. Fatuemode Falurereminding rubleshootre Left ground sensor fale | LED sh 1 tmes,buzer sound one voice
[check whether the eft ground sensor respons lens of machin has amase dust and clean Front round sensor flr LED Mash 2 times, buzmer sound one vice check whether the font around sensorresp ons eno machine has amas ut and clan
(Reh ground sensor falure| LED fash times, bute soundone voice
[check wheter the ight ground Sensor ese Jonselen of machine as amass ist and ean check whether the ight ont shel hasbeen 14 | ehtimpocttsire |teDfashtines buzwrsoundonewice |bioed Is | tetimpactaure | xD ash stimes uzesoundone wie |checkwhether thet rot sel as been boca 5 | teewhea fore |LrDAashatimes bunersaundone voice [check wheter hee whee tek sme:
thin orbeen locked 17 | Rehtwhee ure | LED asn9times buzersoundone ice [check whether te gh whe stuck som
[etirgo beenbiocind la | Fonte LED fash 10 times, buzer sound one ie cack wheter as foreign objects nthe fan 12 | Sdebrashfare _|LeD ash mes, buzzer sound one wees |check wheter the anc rit se rsh has been twned 10) midbrash fore iD ash 12times, buzersound one wc |eheckheter the mdb as been wine Iwthsomsting laa] robot suk nak sure the envenment wth og LED flash 13 times, buzzer sound one ice |
cba pleas do use inthe 1Sem carpet Tips If you cant rule out the corresponding faults by refering tothe above methods, please contact our customer service staff in time Pureatic 8.Specification 19 Type 2-005 Voltage 74V Rated power 1.2W Battery Type Lithium battery Battery capacity 4400mAh Charging time shour Working time 290minutes Temperature range 10C ~ 45C. Humidity range $90%RH Dust bin capacity 650mL Noise $6508 Size 310X310x81mm_ Pureatic 9.Mop Install Manual A A. Place the back of robot upwards A. Make sure no water or dust on the position B. Rip the Velcro strip B.Paste two Velero on the back of robot as picture A Paste the mop on the Velcro A. Do not use too much water wet the mop B.Mop can be reused after washing it avoid water stain, 20 Pureatic FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation, Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help,
*RE warning for Mobile device:
This equipment should be installed and operated with mi 20cm between the radiator& your body. imum distance a Pureatic 2