FCC ID: 2A7VD-H6098A Govee Smart TV Backlight 3S

Model: H6098 Govee Smart TV Backlight 3S English Franais 01 10 English Safety Instructions Read and follow all the safety instructions:

from sharp objects or strong corrosive chemicals. When bending the strip light during installation, avoid folding the LED components as it may aect the product's lifespan. Be cautious of static electricity during installation and usage. Keep the product away Remove nails, metal, or other conductive objects from the installation surface before attaching the strip light, as it may cause short-circuiting. Avoid installing the strip light near potentially dangerous sources (e.g., candles, liquid-lled objects). Do not allow children to install the strip light alone. Do not install the strip light near any heat sources. Introduction Thank you for choosing the Govee Smart TV Backlight 3S. This TV strip light provides an immersive viewing experience. The camera positioned in the top center of your TV can intelligently capture the colors displayed and automatically apply them to your lights. It signicantly enriches your gaming worlds and movie nights. What You Get LED Strip Light Adapter Control Box Camera User Manual 1 1 1 1 1 01 At a Glance On/O Button Color Button Music/Dimmer Button Indicator Light Control Box On/O Button Color Button Music/Dimmer Button Indicator Light Press to turn on/o. Press to adjust the color. Press to enter Music Mode. Long press to adjust the brightness. a. A red light indicates the device is not connected to the network. b. A blue light indicates the device has successfully connected to the network. c. No light indicates the device is not powered on or malfunctioning. Camera X 1 3M Adhesive 02 Installing Your Device Preparation Before Installing:

a. Unbox the strip light and check all items listed in the packing list. b. Power on the strip light and check whether it lights up. Installing Steps:

a. Wipe the installation surface to ensure it is dry and clean. b. Stick the strip light to the back of the TV. Press it rmly and then reinforce it with the provided clips. 03 c. Position the camera to the top center of the TV. Tip: If you have an ultra-thin TV, stick the black foam sticker on the back of the monitor to help x the camera. 90 d. Insert the cable of the strip light and the camera into the control box. (Type-C/DC) Type-C Type-C DC e. Ensure that the control box is in a proper position near your TV. f. Power on the strip light and try connecting it with Govee Home App. 04 Pairing Your Device with Govee Home App What you need:

A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands. 5GHz is not supported. Download Govee Home App from the App Store (iOS devices) or Google Play

(Android devices). Govee Home Turn on your smartphone's Bluetooth. Open the app, tap the "+" icon in the top right corner and search "H6098. Tap the device icon and follow the on-screen instructions to complete pairing. Calibrating the Camera with Govee Home App Mount the camera to the center of the screen. 05 Stick the foam stickers to the 7 calibration points on the screen. Open Govee Home App, go to the details page, then tap Calibration. Begin the calibration by following the instructions. Tips a. Drag the seven calibration points to the position points. Camera Position Points b. The picture will distort under the sh-eye camera. Make sure the calibration points are chosen correctly and the calibration line do not overlap or cross each other or drag the line outside the screen. After that, the chip will automatically calibrate the sh-eye picture and capture the colors. 06 Controlling the Device with Your Voice Open the app, then tap the device icon to enter the details page. Tap the settings icon in the top right corner. Select User Guide and follow the on-screen instructions to control the device using your voice. Specications Power Input (Adapter) Power Input (Control Box) Length Light Displaying Technology Camera Model

-VAC /Hz 12VDC 2A (55-65inch) 1.96ft (left/right)+3.93ft (top/bottom) RGBICW H6098A 07 Troubleshooting The strip light does not light up. Check all wired connections. Unplug and replug the power adapter and the DC port to ensure the control box powers on correctly. The strip light will light up 10s after being powered on. Check the wired connections for the strip light and the camera. If you unplugged the strip light, reboot the power adapter after the light is working correctly. Calibration failed. Calibrate the strip light again. Make sure no other strong lights are aecting the camera. Calibration points must be chosen correctly. For example, the top calibration point on your TV cannot be dragged to the bottom. The calibration lines cannot overlap or cross each other. Calibration can only begin after the strip light is successfully connected to Wi-Fi. The provided strip light's adhesive don't stick well. Wipe the installation surface to ensure it is dry and clean. When attaching the strip light, make sure you press down rmly. Reinforce the strip light with the provided clips or other strong adhesives. Calibration and picture upload failure. Wi-Fi connection failure. With your smartphone, check whether the Wi-Fi connection is stable. Do not skip the Wi-Fi connection during setup. Ensure you input the correct Wi-Fi name and password according to the app's instructions. 5GHz Wi-Fi is not supported. Connect the strip light to a 2.4G Wi-Fi band the reboot your router. With your smartphone, check whether the Wi-Fi connection is stable. The strip light is not compatible with the Wi-Fi name or password. Please change the Wi-Fi name and password. The strip light is not compatible with your router. Please try to connect your strip light to a smartphone hotspot. 08 Customer Service Warranty: 12-Month Limited Warranty Support: Lifetime Technical Support Email: support@govee.com Ocial Website: www.govee.com

@Govee

@Goveeocial

@govee_ocial

@govee.ocial

@Govee.smarthome 09 Franais Consignes de scurit Lisez attentivement toutes les instructions de scurit et respectez-les:

produit lcart dobjets pointus ou de produits chimiques corrosifs forts. Lorsque vous pliez la bande lumineuse pendant linstallation, vitez de plier les composants LED car cela pourrait aecter la dure de vie du produit. Faites attention llectricit statique pendant linstallation et lutilisation. Tenez le Retirez les clous, les objets en mtal ou tout autre objet conducteur de la surface dinstallation avant de xer la bande lumineuse, an dviter tout risque de court-circuit. vitez dinstaller la bande lumineuse proximit de sources potentiellement dangereus-

es ( linstar des bougies, objets remplis de liquide). Ninstallez pas la bande lumineuse proximit de sources de chaleur. Ne laissez pas les enfants installer la bande lumineuse seuls. Introduction Merci davoir choisi le Govee Smart TV Backlight 3S. Cette bande lumineuse TV ore une exprience visuelle immersive. La camra positionne en haut au centre de votre tlviseur capture intelligemment les couleurs aches et les applique automatique-

ment vos lumires. Elle enrichit considrablement vos univers de jeu et vos soires cinma. Contenu du carton Bande lumineuse LED Adaptateur Botier de commande Camra Manuel dutilisation 1 1 1 1 1 10 Prsentation rapide du produit Bouton marche/arrt Bouton de couleur Bouton Musique/Gradateur Voyant lumineux Botier de commande Bouton marche/arrt Bouton de couleur Musique/Gradateur Bouton Voyant lumineux Appuyez pour allumer/teindre. Appuyez pour rgler la couleur. Appuyez pour accder au mode Musique. Appuyez longuement pour rgler la luminosit. a. Un voyant rouge indique que lappareil nest pas connect au rseau. b. Une lumire bleue indique que lappareil sest connect avec succs au rseau. c. Labsence de lumire indique que lappareil nest pas sous tension ou quil fonctionne mal. Camra X 1 Autacollant 3M 11 Installation de votre appareil Prparation avant linstallation:

a. Dballez la bande lumineuse et vriez tous les lments rpertoris dans la liste de colisage. b. Allumez la bande lumineuse et vriez si elle sallume. tapes dinstallation:

a. Essuyez la surface dinstallation pour vous assurer quelle est sche et propre. b. Collez la bande lumineuse larrire du tlviseur. Appuyez fermement dessus puis renforcez-le avec les attaches fournies. 12 c. Placez la camra en haut au centre du tlviseur. Conseil: Si vous avez un tlviseur ultra n, xez l'autocollant en mousse noire l'arrire du moniteur pour pouvoir xer la camra. 90 d. Insrez le cble de la bande lumineuse et de la camra dans le botier de commande.

(Type-C/DC) Type-C Type-C DC e. Assurez-vous que le botier de commande est plac dans une position adquate prs de votre tlviseur. f. Allumez la bande lumineuse et essayez de la connecter lapplication Govee Home. 13 Association de votre appareil lapplication Govee Home Ce dont vous avez besoin:

Un routeur Wi-Fi qui prend en charge les bandes 2,4GHz et 802.11 b/g/n. La bande 5GHz nest pas prise en charge. Tlchargez lApplication Govee Home depuis lApp Store (appareils iOS) ou Google Play (appareils Android). Govee Home Activez le Bluetooth de votre smartphone. Ouvrez lapplication, appuyez sur licne + dans le coin suprieur droit et recherchez H6098. Appuyez sur licne de lappareil et suivez les instructions lcran pour terminer lassociation. talonner la camra avec lapplication Govee Home Montez la camra au centre de lcran. 14 Contrler lappareil laide de votre voix Ouvrez lapplication et appuyez sur licne de lappareil pour accder la page des dtails. Appuyez sur licne des paramtres dans le coin suprieur droit. Slectionnez Guide de l'utilisateur et suivez les instructions l'cran pour contrler l'appareil l'aide de votre voix. Specications Alimentation (adaptateur) Entre dalimentation

(botier de commande) Longueur Technologie dachage de la lumire Modle de camra Longueur de la camra 100-240 VCA 50/60 Hz 12V CC 2A (55-65pouces) 1,96 pied (gauche/droite) + 3,93pieds (haut/bas) RGBICW H6098A 96mm 16 Dpannage La bande lumineuse ne sallume pas. Vriez toutes les connexions laires. Dbranchez et rebranchez ladaptateur secteur et le port CC pour vous assurer que le botier de commande sallume correctement. La bande lumineuse sallume 10secondes aprs avoir t mise sous tension. Vriez les connexions laires de la bande lumineuse et de la camra. Si vous avez dbranch la bande lumineuse, redmarrez ladaptateur dalimentation une fois que la lumire fonctionne correctement. chec de ltalonnage talonnez nouveau la bande lumineuse. Assurez-vous quaucune autre lumire forte naecte la camra. Les points dtalonnage doivent tre choisis correctement. Par exemple, le point dtalonnage suprieur de votre tlviseur ne peut pas tre dplac vers le bas. Les lignes dtalonnage ne peuvent pas se chevaucher ou se croiser. Ltalonnage ne peut commencer quune fois que la bande lumineuse est connecte avec succs au Wi-Fi. Le ruban adhsif de la bande lumineuse fourni ne colle pas bien. Essuyez la surface dinstallation pour vous assurer quelle est sche et propre. Lorsque vous xez la bande lumineuse, assurez-vous dappuyer fermement. Renforcez la bande lumineuse avec les attaches fournies ou dautres rubans adhsifs puissants. chec de ltalonnage et du tlchargement de limage. chec de la connexion Wi-Fi. Avec votre smartphone, vriez si la connexion Wi-Fi est stable. Ne sautez pas ltape de connexion au Wi-Fi pendant la conguration. Assurez-vous de saisir le nom et le mot de passe Wi-Fi corrects conformment aux instructions de lapplication. Le Wi-Fi 5 GHz nest pas pris en charge. Connectez la bande lumineuse une bande Wi-Fi 2,4G et redmarrez votre routeur. Avec votre smartphone, vriez si la connexion Wi-Fi est stable. La bande lumineuse nest pas compatible avec le nom ou le mot de passe Wi-Fi. Veuillez modier le nom et le mot de passe Wi-Fi. La bande lumineuse nest pas compatible avec votre routeur. Essayez de connecter votre bande lumineuse un hotspot de smartphone. 17 Service clients Garantie: Garantie limite 12 mois Assistance: Assistance technique vie E-mail: support@govee.com Site Internet ociel: www.govee.com

@Govee

@Goveeocial

@govee_ocial

@govee.ocial

@Govee.smarthome 18 FCC and ISED Canada Statement This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interfer ence that may cause undesired operation. Warning: Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil nedoit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolec trique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. FCC and IC Radiation Exposure Statement This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Lors de l'utilisation du produit, maintenez une distance de 20 cm du corps an de vous conformer aux exigences en matire d'exposition RF. This Class B digital apparatus complies with Canadian ICES-005. Cet appareil numrique de la classe B est conforme la norme NMB-005 du Canada. Responsible party:

Name: GOVEE MOMENTS(US) TRADING LIMITED Address: 2501 Chatham Rd Suite R Springeld IL 62704 Email: certication@govee.com Contact information: https://www.govee.com/support The trademark Govee has been authorised to Shenzhen Qianyan Technology LTD. Copyright 2021 Shenzhen Qianyan Technology LTD. All Rights Reserved. HAD--

mm G

H6098AD2 80*20mm 2.0 80 mm 20 mm Model: H6098D FCC ID: 2A7VD-H6098A IC: 28789-H6098A HVIN: H6098D Input:12VDC 0.4A ta: 40C Model: H6098D FCC ID: 2A7VD-H6098A IC: 28789-H6098A HVIN: H6098D Input:12VDC 0.4A ta: 40C

Shenzhen Qianyan Technology LTD Date Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Request of Class II Permissive Change Company name: Shenzhen Qianyan Technology LTD FCC ID: 2A7VD-H6098A FCC Part 15 Certification Gentlemen, This is to request a Class II Permissive Change for FCC ID: 2A7VD-H6098A originally granted on 12/10/2023 The major change filed under application is:

(1) Added model H6098D with different adapters, lamp lengths, and camera housing lengths. as follows:

Original Adapter: BI24G-120200-AdU Length of light string: 3.6m Camera: 96mm Model: H6098A version01 New Adapter: BI36GL-120300-AdU Length of light string: 5m Camera: 135mm Model: H6098D Adapter: YXTG36US-1203000 Length of light string: 5m Camera: 135mm Model: H6098D The changes are not related with the other RF parameters, only "Conducted Emission and Radiation Spurious Emission " of H6098D were retested, other data were referred to the original report. If you have any questions regarding this application, please feel free to contact Sincerely, Signature

[Xiaopeng Pan]

[Manager]

Shenzhen Qianyan Technology LTD version01

- Shenzhen Qianyan Technology LTD -

Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 12/6/23

[Shenzhen Qianyan Technology LTD] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: [2A7VD-H6098A ]):

Name and company of U.S. agent: GOVEE MOMENTS(US) TRADING LIMITED Physical U.S. address of agent: 2501 Chatham Rd Suite R Springfield IL 62704, USA FRN of U.S. agent: 0033426016 Email address of U.S. agent: certification@govee.com

[GOVEE MOMENTS(US) TRADING LIMITED] acknowledges their obligation to accept service of process on behalf of [Shenzhen Qianyan Technology LTD].

[Shenzhen Qianyan Technology LTD] with the FRN [0032478174] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature

[Xiaopeng Pan]

[Manager]

5 0 V

[Shenzhen Qianyan Technology LTD]

, U

) 7

) d

1 1 9 2 _ t n e g A _ S U

l e d o m

_ 8 4 Signature

[Tina Liu]

[Certification Manager]

[GOVEE MOMENTS(US) TRADING LIMITED]

- Shenzhen Qianyan Technology LTD -

Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 3/27/24 To whom it may concern:

We, [Shenzhen Qianyan Technology LTD], hereby certify that the equipment for which authorization is sought (FCC ID: [2A7VD-H6098A]) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and (d)(5) and (6). Sincerely, 2 0 V

, U

) i i

d n a

) i

) 5

) d

1 1 9 2 _ u q E d e r e v o C

l e d o m

_ 2 6 Signature

[Xiaopeng Pan]

[Manager]

[Shenzhen Qianyan Technology LTD]

The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01.