FCC ID: 2A7VD-H7184 Smart Kitchen Composter

H7184 1.0 145210mm 80G 28 Model:H7184 User Manual Smart Kitchen Composter Contents Important Safety Instructions Included in the Box Introduction Operation Govee Home App What Can I Put inMy Smart Kitchen Composter How to Care for theSmart Kitchen Composter Changing Filters Troubleshooting Appendix 01 02 03 08 14 15 16 18 19 22 Important Safety Instructions

Please read all accompanying instructions before your rst use of the product.

Do not touch any internal surfaces of the device. Move the device with the built-in handles if necessary.

Make sureall electrical componentsare kept away from water or other liquids to protect against electrical shocks.

Close supervision is necessary when the productis used by or near children.

Always unplug the unit when not in use. When adding/removing parts(e.g. lter or the bucket), also make surethe unit is unplugged.

When clearinga jam,do not use your hands or ngers,and always make surethat the deviceis turned o and unplugged.

Do not operate the deviceif the cord or plug is damaged.Similarly,do not operate if the device malfunctions or is dropped or damaged.Please contact our Govee suppor team for examination or repair.

Do not use any attachments not recommended or sold by GoveeLife as these could damage the device.

The productis intended for household use only.Do not use it outdoors.

Do not let the electric cord hang over the side of a counter or table or touch hot surfaces.

Do not place the deviceon or near a hot gas or electric burneror in a heated oven.

Keep the unit out of direct sunlight and away from any appliances which produce heat.

Make surethat the device sits on a at surface when in operation.To allow proper air ow, make sure to place the device at least 6 inches away from all walls and in a well ventilated space.

When the device is not in use,always make surethe lid remains closed to prevent items from falling into it.

Do not use the devicefor anything other than its intended useand do not alter or adaptin any way.

Do not immerse in water.

Do not place any non-food kitchen waste (e.g. metal, ceramic etc.) into the device to avoid damage.

Be careful not to drop or knock the bucket. Otherwise, the distortion might aect the normal use.

To avoid entrapment hazard, do not touch the grinding blades when it is moving. Do not press the Composting Button when the bucketis empty. Do not remove the bucket and touch the grinderwhen it is moving. PLEASE SAVE THESE INSTRUCTIONS Power Cord & Plug

A short power-supplycord is provided to reduce risks resulting from becoming entangled in or tripping over a longercord.

Do not use longer detachable power cords or extension cords, which may lead to poor contact or cause them to melt. 01

If a long detachable power-supply cord or extension cord is used:

a. The marked electrical rating of the detachable power-supplycord or extension cord should be at leastas great as the electrical rating of the appliance. b. This smart kitchen composter has a 3-prong grounding plug. Any extension cord should be a grounding type 3-wire cord. c.The longercord should be arranged so that it will not drape over the countertop or table top where it can be pulled on by children or tripped over.

Never use the cord as a handle or otherwise yank, strain or stretch the power cord. Do not allow the cord to touch hot surfaces.

Place the devicenear the plug,so that it can be unplugged immediately from power if an emergency occurs.

Do not operate this devicewith a damagedcordor plug.Discard the deviceor return to an authorized service facility for examination and/or repair.

Do not cover the cord with throw rugs, runners, or similar coverings. Do not route the cord under furniture or appliances.Arrange the cord away from high trac areas and where it will not be tripped over.

If the power cord or plug is damaged, please contact customer service or similar professionals for repairs to avoid danger. Note:If the electrical circuit is overloaded with other appliances,thedevicemay not operate properly.Operate it ona separate electrical circuit Risk of Electric Shock & Leakage

Do not insert any foreign objects in the air inlet or outlet when the deviceis powered on,as this may damage the deviceitself and cause electric shock or re.

If any part of the deviceis damaged in operation, contact customer service or professionals for repair or replacement. Do not risk repairing or replacing by yourself. WARNING:To reduce the risk of electric shock, do not expose the deviceto water orrain. CAUTION: To provide continued protection against risk of electric shock, connect to properly grounded outlets only. CAUTION: For protection against the risk of electric shock, do not put metal containers or utensils in this appliance. Included in the Box Item Quantity Smart Kitchen Composter Bucket Activated Carbon Filter Module BackCover User Manual Quick Start Guide 02 1 1 1 1 1 1 Introduction This Smart Kitchen Composteris specially designed to transform and compress kitchen waste. It is electric and designed for indoor use, making it easy to compost food scraps on your countertop. Part Names a. Lid b. Lid Release Button c. Control Panel d. Built-in Handle e. Back Cover f. Activated Carbon Filter g. Filter Outlet Module h. Light Diuser i. RGBLight j. Non-slip Pad k.Bucket l. Bucket Handle m. Grinder n. Heating Plate n e h i j k m l 03 a c b d g f Controls Wi-FiIndicator Storage Mode Mode Button ON/OFF Button Composting Mode Clean Mode ON/OFF Button Standby: When the deviceis plugged into powerand the product is in standbymode, the indicatorwill light up and turn o gradually. Powered-on: When you touch the ON/OFF button, the ON/OFF Button and Mode Button will turn solid.At this time, you can touchthe Mode Button to switch and select dierent modes. Note: When a mode is operating, you can cancel the mode by pressing and holding the ON/OFF Button for 3s. At this time, the ON/OFF Button and the Mode Button are solid. Touchthe Mode Button to switch to a new mode. It will automatically enter the standby mode after 15 secondswithout operation. In the standby mode, the ON/OFFButtons indicator will ash slowly and the Mode Buttons indicator will go out. Mode Button Running at the selected mode: After the product enters the powered-on state, touch the Mode Button. The mode indicatorwill light up. The mode will cycle throughComposting, Storage, and Clean for each touch. The indicator light of the selected mode will remain solidafter ashingfor 3 seconds to conrm that this mode has startedrunning. 04 Restore to Factory Settings: When the device is in the standby mode or is running any other mode, press and hold the ON/OFF Button and the Mode Button for 5s simultaneously. All buttons and indicators will light up for 1s and the device will be restored to factory settings. Control Panel Indicators Indicator Status Wi-FiIndicator Composting Mode Storage Mode Clean Mode Displays the network connection status of the device. Note:

1. Device network is successful connected: The indicator remains solid during operation. When the device is reconnecting to the network in the standby status, the indicator lightsup for 2 seconds and then goes out. 2. Device is pairing with the app and needs conrmation: Flashes 3. Device failed to connect to the network or is disconnected: O 1. In standby mode: O 2. Composting Mode is selected: Flashes 3s 3. Composting Mode is running: Remains solid 1. In standby mode: O 2. Storage Mode is selected: Flashes 3s 3. Storage Mode is running: Remains solid 1. In standby mode: O 2. Clean Mode is selected: Flashes 3s 3. Clean Mode is running: Remains solid 05 Note:

1. There will be voice announcements when the product is powered on, the modeis starting, the treatment is moving to the next linkor when an exception occurs. You can choose to turn on/o the voice announcementin the app. 2. Exception Alerts: If theindicators of Composting Mode, Storage Mode, and Clean Modeare ashing circularly, and the voice broadcasts the classication of the product exception, please contact Govee customer service. RGB Light Status Mode Composting Mode (Drying Process) Composting Mode (Mixing Process) Composting Mode (Cooling Process) Storage Mode Clean Mode Night Light Mode Status Orange Light Green Light Blue Light Warm Yellow Light Cyan Light Turn the night light on or o in the app. Once turned on, the night lights lighting eects will replace the indicator lighting eects. You can set the lighting eects in the app. Functions Composting Mode In this mode, the food waste will be processed. The entire mode includes three steps:

Drying, Mixing, and Cooling. Depending on the typeand weightof food waste that put in, the running time willvary automatically. Drying 3 hours, Mixing 3 hours, and Cooling 1 hour. Note:

1. The processing times listed above may vary depending on the weight and type of food to be processed. The ranges provided are averages based on our internal testingand are for reference only. 2. When running in this mode, you can temporarily open the lid to add some food waste if the mode has started working for less than 15 minutes. It is recommended not to open the lid unless necessarybecause it might aect the result of the food waste processing. Be careful not to open the lid for more than 1 minute and be careful of hot surfaces after opening the lid. Closethe lid within 1 minute and the machine will continue the current 06 mode. If the lid is openedfor more than 1 minute, the mode will end and the device will enter the standby state.In addition, if you open the lid after the composer is running for 15 minutes, the current mode will not continue considering that the nal result might not be ideal. You need to restart the Composting Mode. If there is an overheating alert, you must wait until the bucket has cooled down, then you can restart the mode.mode. If the lid is openedfor more than 1 minute, the mode will end and the device will enter the standby state.In addition, if you open the lid after the composer is running for 15 minutes, the current mode will not continue considering that the nal result might not be ideal. You need to restart the Composting Mode. If there is an overheating alert, you must wait until the bucket has cooled down, then you can restart the mode. Storage Mode In this mode, the device will store the newly added food waste and the waste that has been processed before. In this mode, the food waste will be stirred and some odors will be discharged at intervals. Note:

1. You need to set the starting and ending time of this process. 2. When running in this mode, you can temporarily open the lid to add some food waste. Be careful not to open the lid for more than 1 minute. Closethe lid within 1 minute and the machine will continue the currentmode. If the lid is openedfor more than 1 minute, the mode will end and the device will enter the standby state. Clean Mode After taking out the processed food waste, ll thebucketwith an appropriate amount of water (below the MAX line) and turn on the Clean Modeto perform the pre-cleaning. After cleaning, take out the bucket, pour out the water and then rinse with cold water. Note:

1. The total running time of this mode is about 60 minutes. 2. When running in this mode, you can temporarily open the lid to add somewater. Do not open the lid unless necessary. Be careful not to open the lid for more than 1 minute. Additionally, be careful of hot surfaces after opening the lid. Closethe lid within 1 minute and the machine will continue the currentmode. If the lid is openedfor more than 1 minute, the mode will end and the device will enter the standby state. RGB Light 1. When any of the three modes is running, the corresponding indicatorwill light up. You can turn it o in the app. 2. In addition, you can turn on the night light eect in the app. After turning on, it will replace the indicator lighting eects. You can setthe lighting eects in the app. 07 Memory Function Thecomposterwill save its previous settings when powered o. When it is powered back on,the settingswillresume. Smart Function Connect this composterto Govee Home App via Wi-Fi or Bluetooth to enjoyremote control, schedule function, and light settings. Misplacement Reminder When the lid is closed, the device will detect whether the bucket has been properly placed. If not, the device will inform you via indicators, voice announcements, and app notications. After putting the bucket correctly, restart the program. Device Protection Corresponding alerts and protectionsare provided when there is a jam in the grinder, the bucketis overheating, the NTC fails, the heating components fail, or the lid is opened which causesa shutdown. Activated Carbon Filter It is used for absorbing odorsduring operation. Please replace the lter regularly according to the amount and the smell of foodprocessed. Voice Announcement The product has a voice announcementfunction to remind you when the product is powered on, program is started, process moves on, mode is completed, mode is interrupted, when an exception occurs, etc. Operation Getting Started Initial Setup 1. Remove all packaging. Remove the protective lms on the lid and the control panel if necessary. 08 2. Place the kitchen composteron a at,dry,stable surface. Make surethe composter is at least 6inches (15cm)from all walls and in a well ventilat-

ed areato ensure proper ventilation. 3. Install the activate carbon lter. Remove the protective lm from the activated carbon lter. Assemble the lter air outlet module on the smallest surface of the lter. Open the back cover of the composter and place the activated carbon lter into place with the larger surface facing down. Close the back cover to complete the installation. Make sure the air outlet aligns with the hole on the back cover. 1 5 2 4 3 4. Make sure the bucket is placed properly and the lid is in place. Then plug into power. 09 Using Your Smart Kitchen Composter It is recommended to unplug the composterand remove the bucket from the unit before adding any waste. 1. Open the Lid Press the lid release button to open the lid. Due to the spring design of the lid, be careful when pressing the button. 2. Take Out the Bucket Pull out the bucket with the bucket handle. 3. Add Food Waste to the Bucket As for the details of food waste, please refer to the What can l put in my kitchen composter? section.

Put the waste into the bucket gently.

Cut waste into smaller pieces if necessary. 10

Do not exceed the MAX line when adding food waste. Itis recommended to addnot more than 75% of the MAX line.

It is recommended to add 300g or more waste for each composting. Otherwise, it will not obtain the optimal eect and the waste inside the bucket could turn sticky and scorched. 4. Place the Bucket Back Pay attention when placing the bucket. The bucket handle needs to be placed horizon-

tallyand the protruding part of the handle should align with the groove. If the bucket does not t into place, slightly turn the grinderon the bucket's bottomand tryagain. 5. Close the Lid Make sure the lid is closed properly and will not pop up. 11 6. Plug into Power The indicator of the ON/OFFButton will light up and there will be a voice announcement reminding you to press the ON/OFFButton to turn on the device. 7. Press the ON/OFFButton to Turn on the Composter After turning on the composter, the indicator of the Mode Button will light up. Touch to select a mode. For the rst use, it will be the Composting Mode by default. Touch the Mode Button to switch the mode if necessary. When a mode is selected, the corresponding indicator will ash for 3s and remain solid to conrm the start of the operation. At the same time, there is a voice announcement indicating the process has started. Note: See Controls section for more operations. 8. Operation Completed When the composter is running in the selected mode, the bottom light will display the corresponding color(see Bottom Light Status Instructions). When the process is completed, the bottom light will turno. At the same time, there is a voice announcement indicating the process has ended. Note:

1. The Composting Mode consists of three links including Drying, Mixing, and Cooling. The bottom lights color will change in dierent links (see Bottom Light Status Instructions). At the same time, there will bea voice announcement indicating the mode switching. 2. You can turn on the night light or set other lighting eects for the bottom light in the app (check Lighting Eect Settings in the App). 12 Tips for Performance 1. The greater the variety of fruits and vegetables in your food waste and scraps, the better the end product your composter will produce. 2. Have an even mix of light and heavy food scraps interspersed. 3. Do not leave your unprocessed waste for a long period of time (e.g. over a week). Run the Composting Mode once when necessary. 4. Tuck the bioplastic materials on the sides of the bucketrather than just place themon top. 5. Avoid large amounts of dense or moisture-rich composition foods such as condiments and high sugar fruits. 6. Usethe smart kitchen composterto improve waste breakdown, increase biotic contentand further suppress odors. Smart Alerts Status Indicator Display Voice Announcement The bucket is not placed Composting/Stor-

Keeps ashing in the composter or age/Clean placed properly. Bucket is stuck during Composting/Stor-

Keeps ashing operation. age/Clean Bucket is overheating Composting/Stor-

Keeps ashing age/Clean The heating plate is not Composting/Stor-

Flashes circularly working properly. NTCerror display age/Clean Composting/Stor-

Flashes circularly age/Clean Yes Yes Yes Yes Yes 13 Govee Home App You can access more features using Govee Home App. Downloading Govee Home App To download Govee Home App, scan the QR code or search for Govee in the Apple App Store (iOS) or Google Play Store (Android). Note:

Choose Allow to the permissions requested when opening Govee Home App for the rst time. These permissions allow the apps features to function normally and are not used to record personal, private information.

Due to ongoing updates, Govee Home App may be slightly dierent than shown in this manual. In case of any dierences, always follow the in-app instructions. Pairing with Govee Home App 1. Turn on your smartphone's Bluetooth. 2. Open Govee Home App, touch the +"

icon in the top right corner and search for H7184"

3. Touch the device icon and follow the in-app instructions to press the ON/OFF Button to complete pairing. Note:

Method to turn o Bluetooth and Wi-Fi connection: Press and hold the ON/OFF Button and Mode Button for 5 seconds to restore the device to factory settings. For the next device connection,please make sure to delete the device on the app.

You can use Govee Home App to connect your kettle to Amazon Alexa or Google Assistant, Follow thein-app instructions to connect to each voice assistant.

Govee Home App is being continually updated and its features expanded. For App & Connectivity 1. Cannot connect to Govee Home App.

Make sur the Bluetooth of your smartphone is enabled and your smartphone is notconnected with other Bluetooth devices.

Enable the smartphone's Location Services.

Try connecting with another smartphone. 14

Make sure your app is the latest version.

Make sure you connect to your Wi-Fi router's 2.4GHz network and the network is Working correctly.

Make sure the Wi-Fi password you entered is correct.

Shorten the distance between the kettle, Wi-Fi router, and the smartphone.

Make sure your kettle and the Wi-Fi router are located away from appliances that produce electromagnetic radiation (e.g. microwave ovens, refrigerators, etc.).

If you are using a VPN, try turning it o and then connecting the kettle.

Disable portal authentication for your Wi-Fi network. lf portal authentication is enabled.this kettle will not be able to access your Wi-Fi network, and setup will fail. Portal authentication means that you need to sign in to your Wi-Fi network through a web pagejefore you can use the Internet. 2. Cannot nd the device on the Bluetooth Device Nearby page of the app.

The kettle may be connected with another smartphone. Disconnect it from the other smartphone rst. 3. The kettle is oine.

Make sure the kettle is plugged in and powered on, then refresh My Devices"

in GoveeHome App by swiping down on the screen.

Make sure your router is connected to the internet and your smartphone's network connection is working.

lf the Wi-Fi password has been changed, the kettle will automatically go oine. Try connecting it to the network again.

Delete the oine kettle from Govee Home App, then add and recongure the kettle again in the app. What Can I Put inMy Smart Kitchen Composter?

In Composting Mode and Storage Mode, you can put in foodwaste.A diverse mixture of food waste willallow the composter to give the best results.See below for what can and cannot be put in the kitchen composter. Dos

Fruit and vegetable scraps(without pits)

Food leftovers, plate scrapings(lter the excessive oil)

Meat scraps(cut into small pieces)

Soft bones (sh)

Soft shells (eggs,shrimp)

Coee lters,grounds, and tea bags Dont's

Hard bones (chicken, beef, pork, lamb)

Cooking oils, grease, liquids(Note:

Supports adding water in the Clean Mode)

Fruit pits (avocados, peaches, apricots, nectarines, mangoes)

Soaps, shampooandconditioner bars 15

Soft peels

Rinds(watermelon, melon)

Nuts

Starches(bread, pasta, rice, potatoes, cereals, oats and other grains)

Dairy products (cheese, yogurt)

Houseplants, plants and owers

Yard trimmings(leaves)

Lined bags(chips, cookies, pet food)

Soiled diapers, baby wipes

Cigarettes

Metal, plastic,glass

Foil wrap

Diapers,wipes,hygiene products

Produce netting

Styrofoam

Pet waste

Alcohol

Shellsh Note:

1. Make sure to cut up rigid stems/brous vegetables(e.g.ower stems,broccoli stems, kale stems,etc.)so that they don't get stuck during grinding.If the bucket/kitchen composter appears to bedamaged from the addition of any of the items listed in the Dontscolumn,the warranty is void. 2. Please lter out the oil and water in the food waste before treatment. The large amount of oil may lead to the failure of the drying treatment. 3. Do not mix high-sugar starchy food waste, such as rice, pasta, bananas, corn, potatoes, etc. This type of food waste should be mixed with other food waste or it will be easily scorched. How to Care for theSmart Kitchen Composter

Cleaning your Smart Kitchen Composter Knowing how to keep the composter clean is important so that it stays looking great and continues to function at its best. We recommend cleaning the composter exterior once a month or as frequently as you would clean any other kitchen appliance. To keep your composter at optimal performance,clean the interior of the bucket routinely Ensure your composter is unplugged before cleaning. To wash the exterior of the composter,simply wipe with a damp dish cloth.If your composter is particularly dirty, add a small amount of dish soap during thecleaning process. Finally, use a dry cloth to remove excess moisture. Never submerge your composter under water. Excesswater would cause signicant damage to the electrical componentsand could cause electric shock. 16

Smart Pre-clean Function 1. After the food waste treatment is completed, unplug from power. Take out the bucket(use the handle toprevent scalding). Pour out the food waste, and then ll the bucketwith water below the MAX line. Itis recommended to add water no less than 75% of the MAX line for each cleaning. 2. Put thebucket with water back into the composter. Make sure you put it in correctly. Close the lid. 3. Plug into power. Touch the ON/OFFButton. Then touch the Mode Button and select Clean Mode. 17 4. The Clean Mode will start and might last for one hour. After the cleaningis complet-

ed, take out the bucket. Use the handle toprevent scalding. 5. Pour out the liquids inside the bucket. Rinse the interior surfaces of the bucket several times with room temperature water. Before putting the bucket back, make sure the bucket surfaces are cool and dry.

Cleaning the Bucket The bucket can be easily removed and washed by hand or placed in the dishwasherfor a more thorough cleaning. Ensure the bucket is free from any excess dirt/particles before placing it in the dishwasher. This should be run on a hot cycle. Changing Filters 1. Itisrecommended that the activated carbon lteris replaced every 1-3 months

(Lifespan: 730- 2160 hours), depending on the food waste. Replace it every 3 months if the amount of food processed is small and the smell of it is light. Replace it every month if the amount of food processed is large and the smell of it is heavy. 2. Unplug the unit before replacing the ltersactivated carbon. 3. Installation of the Activated Carbon Filter Remove the protective lm from the activated carbon lter. Assemble the lter air outlet module on the smallest surface of the lter. Open the back cover of the composter, place the activated carbon lter into place with the larger surface facing down. Close the back cover to complete the installation. Make sure the air outlet aligns with the hole on the back cover. 18 1 2 3 4. If your activated carbon lters usage period has expired, please replace it. Please contact our customer service team for a replacement or purchasethrough the Govee Store. Troubleshooting The troubleshooting section below is for solving frequently asked questions. If your problem persists, please contact CustomerSupport. For GoveeLife Smart Kitchen Composter Problem The composter produces bad odors. Indicator

Replace used activated carbon inthe lter.

Check for old waste build up.

Dont let waste sit for too long.

The food waste might have a heavy smell. After being heated up, the steam might not completely disappear immedi-

ately. It is recommended to open the windows. 19 The food wasteis too wet. The food waste is too dry or it is scorched. The composter is taking too long.

Drain liquidsfrom waste before placing it in the bucket.

The Composting Mode might have been turned o accidentally during operation. If so, turn it on again.

The food waste in the bucket might have surpassed the MAX line. Make sure not to surpass the MAX line when adding waste.

The food waste might contain a large amount of oil or water. Filter the oil from the waste before adding into the bucket.

Add 100mL of water and try again. Note: The composter starter can be aected by location and local humidity levels.

The food waste might contain high-sugar starchy food such as rice, noodles, potatoes,etc.It is recommended to mix this type of food waste with many other types of food waste.

If scorching takes place, please add water and soak for a period of time and then wash it.

Listen carefully to check whetherthe grinder ismoving or if the fan is on.If not, there may be a jam.

Unplug the composter, open the lid and remove the waste that is causing the jam.

Close the lidand restart the cycle. What mix of waste and bioplastics is the best for the machine? Can I do a load with just bioplastics

Based on testing,a 10% maximum of bioplastic in relation to food waste/organic wasteis optimal. Do not try to go over this. Addingonly bioplastics is not recommended. It needs to be mixed with organic waste. Can l run a half load?

How full is the minimum and maximum You can run a load as small asyou want, but there is a line on the bucket indicating the maximum capacity.The composter will run with low content capacity. The cycle maycomplete faster.DO NOT RUN EMPTY 20 If I stop the composter or unplug it in the middle of operation, will it be hot?

What do Ido to start it up again Can the compostersit with unprocessed waste fora few days while I ll it?Will it smell Large steam comes out of the air outlet. The composting time is too long. Bucket and contents will be hot. CAUTION: DO NOT TOUCH! There may be some steam so don't stay too close. To restart, close the lid andtouch the ON/OFF Button again. Then touch the Mode Button and select Composting Mode. It will start the whole cycle again but will stillprocess the waste.The cycle might takea shorter amount of time with half-processed waste. It is okay to leave unprocessed waste in the composter for a few days. Filter odor control is inactive while the composter is not running, which may cause it to smell. We recommend you turn on the Storage Mode or run the Composting Mode routinely so that you are not leaving in waste for too long. The food waste might contain too much water. Steam is produced by the evaporation of water when heating food waste. To protect the environ-

ment and save energy, please lter out the oil and water rst. The food waste may be too much for the composter or it may contain too much water. Thewater content varies depending on the type and weight of food wasteadded. The processing time is generally 7.5 hours or less. Make sure your composter can complete the processing of food wastewithin the standard time while meeting the standard capacity (below the Max line). The grinder is clogged and the composter has stopped working. The food waste might contain ox bone, pig bone, sheep bone, shellsh and other waste that is hard to dispose. 21 Appendix After-Sales Service Warranty: 12-Month Limited Warranty Support: Lifetime Technical Support Email: support@govee.com Ocial Website: www.govee.com

@Govee

@GoveeOcial

@GoveeOcial

@goveeocial

@govee.ocial Specications Model Name Power Supply Power Consumption Composting Cycles Capacity Net Weight Dimensions H7184 AC 120V60Hz 550W Drying, Mixing, Cooling

3.0L/3.2QT 20.1 lb/9.1 kg 15.6x13.7x14.6in/39.6x34.7x37.1cm FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution 22 Changes or modications not expressly approved by the party responsible for compli-

ance could void the users authority to operate this equipment. RF Exposure Statement This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. The following importer is the responsible party :

Name: GOVEE MOMENTS(US) TRADING LIMITED Address: 2501 Chatham Rd Suite R Springeld IL 62704 Email: certication@govee.com Contact information: https://www.govee.com/support FOR INDOOR USE ONLY The trademark GoveeLife has been authorised to Shenzhen Qianyan Technology LTD. Copyright 2021 Shenzhen Qianyan Technology LTD. All Rights Reserved. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Shenzhen Qianyan Technology LTD is under license.

Reference No.: WTX23X12260039W001/002 Page 1 of 14 ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the devices expected lifetime. Proposed Label Location on EUT FCC ID Label Location Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn

Shenzhen Qianyan Technology LTD No.3301,Block C,Section 1,Chuangzhi Yuncheng Building,Liuxian Avenue,Xili Community, Xili Street, Nanshan District, Shenzhen, China Date: 2024-03-06 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attestation Statements Part 2.911(d) (5) (i) Filing Ref:

SUBJECT: FCC Application for FCC ID: 2A7VD-H7184 To Whom It May Concern:

Shenzhen Qianyan Technology LTD certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signatory

[Xiaopeng Pan, Manager]

Shenzhen Qianyan Technology LTD No.3301,Block C,Section 1,Chuangzhi Yuncheng Building,Liuxian Avenue,Xili Community, Xili Street, Nanshan District, Shenzhen, China Date: 2024-03-06 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Statements Part 2.911(d) (5) (ii) Filing Ref:

SUBJECT: FCC Application for FCC ID: 2A7VD-H7184 To Whom It May Concern:

Shenzhen Qianyan Technology LTD certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely, Signatory

[Xiaopeng Pan, Manager]

Shenzhen Qianyan Technology LTD No.3301,Block C,Section 1,Chuangzhi Yuncheng Building,Liuxian Avenue,Xili Community, Xili Street, Nanshan District, Shenzhen, China Date: 2024-03-06 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2A7VD-H7184 Confidentiality Request To whom it may concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. Block Diagram Operational Description Schematics Parts List Tune-Up Information Security Information Software Defined Radio (SDR) Information The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Internal Photos Test Setup Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. or For 180 days pursuant to KDB 726920 D01. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signatory

[Xiaopeng Pan, Manager]

Shenzhen Qianyan Technology LTD No.3301,Block C,Section 1,Chuangzhi Yuncheng Building,Liuxian Avenue,Xili Community, Xili Street, Nanshan District, Shenzhen, China Date: 2024-03-06 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT: FCC Application for FCC ID: 2A7VD-H7184 To Whom It May Concern:

I, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the class B device. I understand the following FCC requirements:

1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage:

https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm (Select the "accredited" option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the Users Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States. According to 2.909(b), the responsible party is either the Manufacturer or if the product is imported the Importer. Sincerely, Signatory

[Xiaopeng Pan, Manager]

Shenzhen Qianyan Technology LTD No.3301,Block C,Section 1,Chuangzhi Yuncheng Building,Liuxian Avenue,Xili Community, Xili Street, Nanshan District, Shenzhen, China Date: 2024-03-06 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2A7VD-H7184 POWER OF ATTORNEY To Whom It May Concern:

We, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Shenzhen Qianyan Technology LTD are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Signatory

[Xiaopeng Pan, Manager]

Shenzhen Qianyan Technology LTD No.3301,Block C,Section 1,Chuangzhi Yuncheng Building,Liuxian Avenue,Xili Community, Xili Street, Nanshan District, Shenzhen, China Date: 2023-12-20 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 USA Ref: Attestation Statements Part 2.911(d) (7) Filing Grantee Code: 2A7VD Applicant FRN: 0032478174 Shenzhen Qianyan Technology LTD certifies that, as of the date of the filing of the application, GOVEE MOMENTS (US) TRADING LIMITED is our designated U.S. agent for service of process for the above referenced Grantee Code. Shenzhen Qianyan Technology LTD accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. GOVEE MOMENTS (US) TRADING LIMITED accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced Grantee Code. Designated U.S. Agent Information:

Name: GOVEE MOMENTS (US) TRADING LIMITED U.S. Agent FRN: 0033426016 Address: 2501 Chatham Rd Suite R Springfield IL 62704 Contact Person:

Jenny You Tel.: 001 (206) 604-2935 Email: certification@govee.com Sincerely, Signed on behalf of Shenzhen Qianyan Signed on behalf of GOVEE MOMENTS(US) Technology LTD TRADING LIMITED Name: Xiaopeng Pan Title: Manager Date: 2023-12-20 Name: Jenny You Title: Manager Date: 2023-12-20