User Manual Video Doorbell QUHWA VP-K I. Packing List A. Video door phone host: 1 B. Mounting wrench: 1 C. Manual: 1 D. Host support: 1 E. Hex screw: 2 F. Screw expansion plug: 5 G. Support screw: 5 II. Product Diagram Front View 1) 1: Microphone 2: Light sensation window 3: Wide-angle high-definition camera and infrared lamp 4: Human model sensing window 5: Indicator light 6: Touch key area 7: Loudspeaker 2) Rear View A: Support fastener B: Reset button C: NO (normally open) D: GND (ground) E: NC (normally connected) FG: AC / DC H: Product Label I: Micro SD Connection instructions:
(NO + GND): to magnetic lock
(NC + GND): to electric lock AC/DC: to AC 8-16V or DC 9-24V, without polarity difference Micro SD: installed/removed in power off state, with a maximum of 64G supported. Reset button Operation: Long press the reset button for 5 seconds and release to restore the factory settings. The device will restart with a prompt tone upon completion. 3) Host support 1: Screw fixing hole; 2: Cord hole 3: Fastener hole. III. Installation Instructions IV. Downloading APP Search in application market for tilvision V. Registration and login VI. Adding equipment 1) Power on the device and wait for the system prompt tone. Device startup completed, before adding the device, make sure the mobile phone has been connected to the 2.4G WIFI network. 2)Open the tilvision app and click "+"Click the Setup device button and enter the Wi-Fi password. 3Long press the doorbell indicator light, release after the "di-di-di" tone 4) Warning tone two times will be presented during the configuration process:
a) The first beep tone indicates success of the device to obtain wifi information;
b) The second whistle indicates success of device configuration. 5) Search the configuration results. VII. Main function 1) Call answering When a visitor presses the call button, the indoor ding-dong machine (optional) ring out, and the mobile terminal receives the call information at the same time. Open the software, the call window is displayed against the background of a visitor picture. Operations available are the following: answer, talkback, video, photographing, unlock and reject. 2) PIR alarm mode When going out (or at night fortification) and the PRI monitoring mode is turned on, upon detection of someone stops at the doorway, the mobile terminal will receive the alarm screen with a screenshot of the visitor as the background, and at the same time the mobile terminal will emit audio warning to remind the owner to answer or monitor. 3) History query In the software main interface, swipe right to enter the menu mode, click the History icon to enter the archive recording interface (the following is an image of cloud storage as an example), click on the corresponding icon to view the corresponding history. 4) New member to add device
"Search" :Search the device which already set up in the same wifi
"Scan QR code" :Scan QR code of device shared by family members. 5)Administrator adds an new username The administrator needs to add username of the new member in the "Settings - User Management". 6)Device sharing click "Home page - Device - Device sharing"
Main product parameters Product Name: WIFI Video Doorbell Product Model: VP-T10 Video angle range: 120 Video compression: H.264 Video pixels: HD720P Audio: Two-way voice intercom, comes with echo cancellation Loudspeaker: 1W PIR distance: 3 meters detection Day-night mode: Automatic switching between photosensitive sensors and between IR-CUT dual filtering Night infrared lamp: 5 Wireless connection: WIFI 2.4GHz, IEEE 802.11 b/g/n Power input: AC 8-16V, DC 9-24V Working with auto-learning code wireless indoor chime Once indoor chime are powered the video doorbell and in 20seconds,press the call button to complete configuration. The indoor chime will sound if visitor rings the video doorbell in case the smart phone is not available. Names for Parts:
Functions Instruction 1.PresstheautolearningcodebuttononthesideoftheReceiver andholdfor2or3seconds,AbeepsoundcomesoutandtheLED indicationwilllight.Thenpressthecallbuttononthevideo doorbellonce.TheReceiverwillsoundtoindicatethatnew operationcodeisregisteredandmemorized.Thusthevideodoorbell workssuccessfullywiththeindoorchime.Maximum60codescanbe matchedandsavedinthechimewithin10seconds.Ifthereisno codematchedandsavedwithinthe10s,thechimewill automaticallyexitandtherewillbetwobeeps. 2.Thereisamelodyselectorlocatedonthesideofthe Receiver(seediagram).SelectableTone:Total36 melodiesavailable. Note: Youmustselectthedesiredringfirst,thenmatchthevideo doorbell.Ifyouwanttochangeringtones,youmustdeleteallthe informationsavedinthechimeandreset. Pressthemelodyselectorbuttonandholdfor5seconds,youcan deletealltheinformationwithinthechime.Atthesametime, theLEDindicatorlightwilllight. 3.ThereisalsoavolumebuttononthesideoftheReceiver(see diagram).Pressittoadjustthesoundvolume,totalsixlevels. 4.ThereisaSoundandFlashSwitchButtononthesideofthereceiver. Pressthisbuttonforthreeoptions,workingonlywithsound, onlyLEDflash,soundandLEDflash:
A.IfabeepsoundcomesoutandtheLEDindicatordoesnotlight. thechime willworkonlywithsound. B.IfabeepsoundcomesoutandtheLEDindicatorlights,the chimewillworkwithsoundandLEDflash. C.IftheLEDindicatorlights withoutbeepsound,thechime willworkonlywithLEDflash. Notes:
Ifthechimesoundsfornoreasonduringthedigitalcodesetting,it isindicatedthatithasbeen interferedbyothersimilarDoorbell nearby,resettheautolearningcodeasperpoint1above. FCC Caution:
This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment. Such modifications or change could void the users authority to operate the equipment. This radio transmitter (identify the device by certification number or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCCs RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.