FCC ID: 2AAV8QKP3 Wireless Driveway Alert Alarm

Driveway Alert Alarm Instruction Manual Model No.: QH-9821A-2T Summary Strong anti-interference performance The full range of fine temperature compensation CE, FCC and ROHS compliant Specification Power Supply (Receiver): DC 6 V or 1.5 V C Battery x 3 Power Supply (PIR Transmitter): DC 4.5 V (1.5 V AAA Battery x 3 ) Working Current (Receiver Alarming): 180mA Working Current (Receiver Chiming): 200mA Working Current (PIR Transmitter): 15mA Quiescent Current (Receiver): 400uA Quiescent Current(PIR Transmitter): 50uA Sensing Angle: 45 Sensing Distance: 58 m Ring Volume: 100dB ( within 0.5 m) Reception Sensitivity: - 85dBm Accessories List 2 x PIR Transmitters 1 x Receiver 1 x Instruction Manual 4 x Wall Plugs 4 x Screws Names for Parts

(1) LED Indicator (2) Speaker (3) DC 6V Input Jack

(4) Switch for Chime, Low, Alarm (5) On/Off Switch (6) Sound-and-Flash Switch Button

(7) Auto-learning Code Button (8) PIR (9) LED Indicator

(1)

(2) CHIME LOW ALARM

(3)

(4) ON OFF

(5)

(6)

(7)

(8)

(9) 1 Battery Installation (Receiver) 1. Remove the screws on the rear of the Receiver with a cross-headed screwdriver. Remove the battery compartment cover. 2. Insert three C type batteries in the battery compartment according to the+ -marks. 3. Replace the battery compartment cover and secure the screws. 3 x C 1.5V Alkaline Battery Battery Installation (PIR Transmitter) 1. Remove the screws on the rear of the PIR Transmitter with a cross-headed screwdriver. Remove the battery compartment cover. 2. Insert three A A A 1.5 V batteries in the battery compartment according to the+ -marks in the battery compartment. 3. Replace the compartment cover and secure the screws. 3xAAA 1.5V Alkaline Battery 2 Wall MountReceiver and PIR Transmitter PIR Transmitter Unit Drill a hole on the wall at your required height. Insert a wall plug (included) into the hole. Then insert a screw (included) into the wall plug. Be noted that you should not insert completely the screw into the wall plug, but keep a suitable length out of the wall surface, which is to hold the transmitter. Finally you can hang the transmitter.

(Mounting on UPVC or metal doorframe surfaces will reduce the transmitting range.) 1 2 2 Receiver Unit Drill two holes on the wall at your required height. The distance between the two holes should match the two hanging holes at the back of the receiver. Then insert two wall plugs (included) into the holes. After that, insert two screws (included) into the wall plugs. Be noted that you should not insert completely the screws into the wall plug, but keep a suitable length out of the wall surface, which is to hold the receiver. Finally you can hang the receiver. Avoid positioning on UPVC Frames, above heat sources (e.g. radiator) or in damp areas such as a kitchen or bathroom. 1 Installation Install the PIR transmitter in channels through by cars or on wall of the indoor main channels or key monitoring area. During installation, pay attention to the followings: avoid direct sunlight;

dont be in face of glass doors and windows; dont be opposite to cold and hot air vents or sources;

and dont be opposite to any easy oscillation. The recommended installation height is 1.0m-1.5m, adjusting the angle to make it face the monitoring area. If a car or a person moves into the detection range of the PIR transmitter; the PIR transmitter will send a signal to the receiver. The receiver makes ding-dong or alarm sound after receiving the signal to warn the master. Functions Instruction 1. Install the PIR Transmitter with three AAA alkaline batteries.It turns into induction state after 10 seconds power-on,with induction time interval 5 seconds. 2. Install the receiver with three 1.5V type C alkaline batteries or plug the receiver into DC6V 200mA power. Move the On/Off Switch to the ON position. Maximum 50 codes can be matched and saved in the receiver within 15 seconds. After 15 seconds, the receiver turns into power saving mode. Note: If there is no code matched and saved within the first 15s, the receiver can be matched with and save ONLY one code after 15s. 3. When there is a code saved within the receiver, you need not to match the code the second time you turn on the power, as the receiver will come directly into alarm state or chime state. 4. If you want to add PIR Transmitter or magnetic transmitter, press the auto-learning code button on the side of the Receiver once, then trigger the PIR Transmitter or magnetic transmitter. The Receiver will sound to indicate that the transmitter works successfully with the Receiver. (Press the button once can only match one transmitter). 5. Press the auto-learning code button and hold for 5 seconds, you can delete all the information within the receiver. At the same time, the LED indicator light will flash and receiver sounds. 6. There is a Sound and Flash Switch Button on the side of the receiver. Press this button for three options, working only with sound, only LED flash, sound and LED flash. 3 7. Low voltage indication: normal voltage for the receiver 3.08V0.1V and for the transmitter 3.08V0.1V. If lower than this voltage, the LED indicator light will flash once every second to remind you to change the batteries. 8.There is one Chime-Low-Alarm switch on the side of the receiver. It operates as follows: High Volume Chime/ Low Volume Chime / Alarm. 9. Move the Chime-Low-Alarm switch to Chime or Low position the receiver will work as a chime. Move the switch to Alarm position, it will work as an Alarm. 10.The receiver batteries lifespan: if a 1.5V C battery with capacity 7800mAh is used, based on average 10 sounds per day, 80% of the battery capacity available, these three batteries can be used for 20 months. 11.The PIR transmitter batteries lifespan: if a 1.5V AAA battery with capacity 1150mAh is used, based on average 10 sounds per day, 80% of the battery capacity available, these three batteries can be used for 12 months. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 4

1.. 2.(0.10mm). 3.. 5.00mm 7.00 mm m m 0 0 7

. m m 0 0 5

. 38*25mm Model: QK-P3 Optional PIR Montion Sensor Frequency:433.92MHz input:4.5V

(31.5V AAA battery) Max.15mA SHENZHEN QIAOHUA INDUSTRIES LIMITED Room 301, No.1 building, Qiaohua Industrial Park, Luotian forestry center, Yanchuan, Yanluo town, Bao An, Shenzhen, China 518127. FCC ID: 2AAV8QKP3 transmitter transmitter Model: QK-P3 Optional PIR Montion Sensor Frequency:433.92MHz input:4.5V SHENZHEN QIAOHUA INDUSTRIES LIMITED Room 301, No.1 building, Qiaohua Industrial Park, Luotian forestry center, Yanchuan, Yanluo town, Bao An, Shenzhen, China 518127. FCC ID: 2AAV8QKP3

(31.5V AAA battery) Max.15mA FCC QH-9821A& QK-P3 2023.6.20

DATE : 2023-06-20 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Actas Agent On our behalf, | appoint Jason Wu of Global United Technology Services Co., Ltd.and No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China to act as our agent in the preparation of this application for equipment certification. | certify that submitted documents properly describe the device or system for which equipment certification is sought. | also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission's regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, | acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with SHENZHEN QIAOHUA INDUSTRIES LIMITED and Room 301, No.1 building, Qiaohua Industrial Park, Luotian forestry center, Yanchuan, Yanluo, town, Bao An, Shenzhen, 518127, China Signature: Ruishi yory E Name: Ruishi Yang Title: General Manager Company: SHENZHEN QIAOHUA INDUSTRIES LIMITED

SHENZHEN QIAOHUA INDUSTRIES LIMITED DATE : 2023-06-20 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AAV8QKP3 Product Name: Wireless Driveway Alert Alarm Request for Confidentiality To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram

>] Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

{External Photos Test Setup Photos ;

[x] Internal Photos

{| User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR J For 180 days pursuantto KDB 726920 DO1. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Signature: ie ig Name: Ruishi Yang Title: General Manager

Differences Declaration To whom concern, We company SHENZHEN QIAOHUA INDUSTRIES LIMITED hereby declares:

The product models QH-9821A&QK-P3and QH-9821A-2T,QH-9821A ,QH-9821,QK-P3,QH-9820A,QH-9820A-2,QH-9820A-2TQH-

9820A-2R,QH-9820A-2P,QH-9820M,QH-9820M-2,QH-9820M-2T,QH-9820M-2M,QH-9 820M-2P,QH-9820G,QH-9820G-2,QH-9820G-2T,QH-9820G-2R,QH-9820G-2P,QH-982 1A-2,QH-9821A-2R,QH-9821A-2P,QH-9821M,QH-9821M-2,QH-9821M-2T,QH-9821M-

2M,QH-9821M-2P,QH-9821G,QH-9821G-2,QH-9821G-2T,QH-9821G-2R,QH-9821G-2 P,QH-9822A,QH-9822A-2,QH-9822A-2T.QH-9822A-2R,QH-9822A-2P,QH-9822M,QH-

9822M-2,QH-9822M-2T,QH-9822M-2M,QH-9822M-2P,QH-9822M-2R,QH-9822G,QH-9 822G-2,QH-9822G-2T,QH-9822G-2R,QH-9822G-2P,QK-P1,QK-P2,QK-P4,QK-P5,QK-

P6,QK-R1,QK-M1,QK-A1 are identical in the same PCB layout, interior structure and electrical circuits, the only difference is the model name for commercial purpose. Authorized signature:

Date: 2023-5-4

SHENZHEN QIAOHUA INDUSTRIES LIMITED U.S. Agent Designation for Service of Process -

Certification Attestation Letter 6/20/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2AAV8QKP3 FRN of applicant: 0022933832 Per section 2.911(d)(7) of the FCC rules, SHENZHEN QIAOHUA INDUSTRIES LIMITED certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process:

Company Name: 1 BYONE PRODUCTS INC Physical U.S. Company Address:

4230 E Belmont Street, Ontario,CA91761,USA Contact Person: Vincent Agent Email Address: vincent@1byone.com FRN: 0033538562 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Agent Signed (if different to Applicant):

Signed: Roishi ia Signed: Cpe Printed name: Ruishi Yang Printed name:Vincent Title: General Manager Title: General Manager Company Name: SHENZHEN QIAOHUA Company Name: 1 BYONE PRODUCTS INDUSTRIES LIMITED INC Date: 6/20/2023 Date: 6/20/2023

*the applicant must designate a contact located in the United States for purposes of acting as the applicant's agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process.

SHENZHEN QIAOHUA INDUSTRIES LIMITED Covered Equipment Certification Attestation Letter 6/20/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2AAV8QKP3 SHENZHEN QIAOHUA INDUSTRIES LIMITED certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not covered equipment. SHENZHEN QIAOHUA INDUSTRIES LIMITED certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Signed:

Printed name: Ruishi Yang Title: General Manager Company Name: SHENZHEN QIAOHUA INDUSTRIES LIMITED Date: 6/20/2023