FCC ID: 2AVBV-APAIGENIE 360 degree object tracking holder

ModelApai Genie FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF warning statement:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Shenzhen Qiming Innovation Technology Develpment Co.,Ltd. Room A609,Huafeng Internet Creative Park,No.107 Gonghe Industrial Road,Xixiang Street,Baoan District,Shenzhen City FCC WARNING:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC RF EXPOSURE STATEMENT:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Room A609,Huafeng Internet Creative Park,No.107 Gonghe Industrial Road,Xixiang Street,Baoan District,Shenzhen City Shenzhen Qiming Innovation Technology Develpment Co.,Ltd.

Label Location On EUT Label Product Name: 360object tracking holder Model No.: Apai Genie FCC ID: 2AVBV-APAIGENIE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Shenzhen Qiming Innovation Technology Develpment Co.,Ltd. Declaration concerning Antenna Specification It is hereby declared that the product Model No.: Apai Genie, Snappy 1, Snappy 2, Snappy 3, Snappy 4, Snappy 5, Snappy 6, Snappy7, Snappy 8, QM001, QM002, QM003, QM004, QM005, QM006, QM007, Apai007, Mini-S, Capture 1, Capture 2, Capture 3, Capture 4, Capture 5, Capture 6, Falcon, Falcon Mini, Falcon 2, Falcon 3, Falcon 4, Falcon 5 FCC ID : 2AVBV-APAIGENIE fulfills the requirement in FCC test relating to the antenna type. The device specified above confirms to the FCC recommendations for internal antenna type(s) described below:

Model No. of antenna: N/A Type of antenna:

PCB Antenna Gain of the antenna: 0 dBi Frequency range: 2402MHz~2480MHz The mounting of the antenna is fixed to the radio module and no other antenna should be used. Company name: Shenzhen Qiming Innovation Technology Develpment Co.,Ltd. Address: Room A609, Huafeng Internet Creative Park, No.107 Gonghe Industrial Road, Xixiang Street, Baoan District, Shenzhen City, China City:

ZIP / Postal code:

Country:

Shenzhen China Place:

Shenzhen Date: 2020-05-25 Signature:

version01

Shenzhen Qiming Innovation Technology Develpment Co.,Ltd. Add: Room A609, Huafeng Internet Creative Park, No.107 Gonghe Industrial Road, Xixiang Street, Baoan District, Shenzhen City, Guangdong Province, China Tel: 0755-21615181 Fax: 0755-21615181 Email: zhangex@qmcx.net FCC Authorization Date: 2019-12-06 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We, Shenzhen Qiming Innovation Technology Develpment Co.,Ltd. hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, QA-FR-170-B

Shenzhen Qiming Innovation Technology Develpment Co.,Ltd. Add: Room A609, Huafeng Internet Creative Park, No.107 Gonghe Industrial Road, Xixiang Street, Baoan District, Shenzhen City, Guangdong Province, China Tel: 0755-21615181 -

Fax: 0755-21615181 Email: zhangex@qmex.net FCC Confidential Authorization Date: 2019-12-06 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCCID: 2AVBVAPAIGENIE In accordance with Sections 0.457 and 0.459 of the Commissions Rules, Shenzhen Qiming Innovation Technology Develpment Co.,Ltd. hereby requests long-term confidential treatment of information accompanying this application as outlined below:

e Block Diagram e Schematics e Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours," |

ignature yi) /

Signat Va ve Zhang Chunxia oe aa

Shenzhen Qiming Innovation Technology Develpment Co.,Ltd. Address:

Room A609, Huafeng Internet Creative Park, No.107 Gonghe Industrial Road, Xixiang Street, Baoan District, Shenzhen City, Guangdong Province, China 0755-21615181 0755-21615181 Tel.:

Fax:

E-mail:

zhangcx@qmcx.net Product Similarity Declaration 2019-11-19 To:

FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, We, Shenzhen Qiming Innovation Technology Develpment Co.,Ltd. hereby declare that we have a product named as 360object tracking holder (Model: ApaiGenie, FCC ID:

2AVBVAPAIGENIE

)was tested by BACL, Meanwhile, for our marketing purpose, we would like to list a series model (Snappy 1, Snappy 2, Snappy 3, Snappy 4, Snappy 5, Snappy 6, Snappy7, Snappy 8, QM001, QM002, QM003, QM004, QM005, QM006, QM007, Apai007, Mini-S, Capture 1, Capture 2, Capture 3, Capture 4, Capture 5, Capture 6, Falcon, Falcon Mini, Falcon 2, Falcon 3, Falcon 4, Falcon 5) on reports and certificate. These models have the same circuit. The differences among them is model name. We confirm that all information above is true, and well be responsible for all the consequences. Please contact me if you have any question. Sincerely Yours,