FCC ID: 2AWO9-H1 Bluetooth Headset H1

WIRELESS HEADSET Hl USER MANUAL Contents:

1. What's in the Box-----------------

3 2 Product Overv,ew-----------------

4 3. Basic Operation

5 What's in the Box Product Overview Basic Operation 4. LED Indicator

-----6 5. Basic Speccations-------------------------------6 Wireless Headset Type-C Charging Cable 6.Wearing on the Left or Right-----------------

----7 7. Super Easy Pairing-----------------

7 8. Super Easy Pairing

8 9. Super Easy Pairing

9 10. Pairing with 2 Devices 10 Simultaneously

o

11. Charging----------------------------------------

10 User Manual Package Contents:

A. Wireless Headset x 1 G) Multi-Function Button Track Volume+/Previous C) : Power on Poweroff After-sale Email: info@gixxted.com Official Website: www.gixxted.com B. Type-C Charging Cable x 1 Volume-/Next Track

@ LED Indicator C. User Manual x 1 Charging Port Microphone

-1-

-2-

-3-

-4-

LED Indicator Wearing on the L eft or Right Super Easy Pairing SuperEasy Pairing

\. : Answer/End a call

..., : Hang up a call Volume up - Previous Longpress track

-> : Volume down Muteon/off

:siri II : Play/Pause

\2 :

Reecta call Next track Singleclick

-s-

Poweron: LED flashes green for ls Power off: LED flashes red for ls then turns off B. How to pair with a computer B-1. How to pair?

The headset can pair with the computer included in the package) without using the dongle (not Pairing mode: LED flashes green & red alternately Connected:

off Green & red LED lights Charging status:

Red light on Charging complete:

Red light off, green light on Low battery:

Red light on with a voice prompt Reset: LED flashes green & red alternately 2S Basic Specifications To switch to your other ear,ustrotate the boom Supporting Protocols : A2DP/HFP/HSP/AVRCP Time

: 2-3 hours 30 hours 40 hours 90 days 400mAh 4 Operating Temperature

: -10 ---SO"C Blue/Reen LED light Super Easy Pairing 1. Turn on the headset, headset will enter pairing mode the

61,e,oo<h Voice Prompts Hl 1. When the headset is turned on, there will be a voice prompt: "Power on"

2. When the headset is turned off, there will be a voice prompt: "Power off"

3. After being connected successfully, there will be a voice prompt of your

- m II and search for the model name "Hl" to 2. Turn on the Bluetooth devices connect. hear a voice prompt When pairing saying" connected"

is complete, you will

" connected". 4. When disconnected,

"disconnected"

there will be a voice prompt

-6-

85*135mm 105g

-7-I 1. If your computer doesn't driver software according or contact successfully, corner of your computer your computer you will have a little have Bluetooth, first download a universal to the model of your computer manufacturer. When Bluetooth on browser is installed icon in the bottom right gray Bluetooth 2. Turn on your computer's Bluetooth 3. Start with the headset off. Press and hold the MFB button of Hl for 2 seconds, and blue lights will be discovered

"Pairing"

with red mode automatically so it Keep the Hl close to the computer say You will hear the voice guidance it will turn on and enter pairing flash alternately. by the computer. 4. On your PC, select Start > Settings Bluetooth of your device. is complete. or other device > Bluetooth A window will pop up indicating

> Click on the model number [Hl]

the Bluetooth connection You will hear "Your headset is connected"

at the same time

> Bluetooth

& other devices

> Add icon at the bottom right, then click Open Sound the Speakers S. Right-click settings Select [Hl] as your default Select [Hl] as your default make sure that Hl has been selected input device.Then output device (Speaker) input device (Microphone) as both default output and default close Settings or other device Search Bluetooth Connection Setting

(Hl) Sound Set (Hl) as default Bluetooth on Add Bluetooth

& other devices input & output

& Click click device

-8-

B. How to pair with a computer B-2. The microphone disabled or not set as the default device on your computer. and the speaker of the headset may be To avoid the problem of having no sound when pairing the headset with your computer:

1. Make sure the headset is pairing with the computer successfully. 2. Please check the sound settings is played via the correct connected with your computer. of your PC to make sure sound output and input after the headset is Please follow the steps below to set 1. Right-click the Speakers Sound settings 2. Select [ Hl ] as your default 3. Select [ Hl ] as your default 4. Make sure that Hl has been selected output device (Speaker)

) input device (Microphone as both default output and icon at the bottom right, then click Open default input device. Then close Settings B-3. Zoom & Other meeting Apps settings To avoid the problem of one side can not hear the voice from the other side when having calls via Zoom, Teams or other when using it with a computer:

conferencing platforms Pairing with 2 Devices Simultaneously

1. Follow pairing Page 7 to pair the 1st Bluetooth instructions on device 2. Turn off the Bluetooth of your The headset will e pairing model

{(I : '>) )

(j

, l))

e

tr 1st device tq procedure

om 3. Repeat the pairing 5. Turn the headset off and then on to reset The headset will automatically connect to the 2 devices at the same time Ch a r_g_i11_9_ with the computer successfully. as both default output of your PC. settings 1. Make sure the headset is pairing 2. Make sure that [ Hl J has been selected and default input device on the sound settings 3. Please check the sound make sure the mic and the speaker are both set to Hl & the microphone is not muted. Zoom, Teams o, othe, Sett;ng Aud;o & v;deo Set (Hl) confmn,;ng of these conferencing of the platforms as M;, and Speake,s platforms platfo,ms you are using, NOTE If you connected the headset With the charging flashes will alternately the headset unsuccessfully or your device can't findHl,please reset cable plugged in, press and hold the MFB button The LED for 5 seconds. green & red 2S. Reset is completed has matching C. Reconnect The headphone for 2 seconds to power on, Hl will automatically mode with red and blue lights reconnect to be connected the last paired device automatically, flash alternately manually records. Hold the MFB button of Hl enter pairing and will search and other devices need

-9-

WARRANTY If you encounter our professional Email: info@gixxted.com

@Gixxted Facebook:

any problems service customer in the use of the product. please team will provide feel free to contact solutions you with high-quality us.

-10-

FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Shenzhen Quanmeng Technology Co.,Ltd 201 Unit 2,no.1219,Guanguang Road,Guihua Community, Guanlan Street,Longhua District Shenzhen,Guangdong China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-7-26 To whom it may concer:

We, Shenzhen Quanmeng Technology Co.,Ltd, hereby certify that the equipment for which authorization is sought (FCC ID: 2AWO89-H1) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (httos://www foc. gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and (d)(5) and (6). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 DO1 Sincerely, ii que hua Signature GUO HUA LI The Manager Shenzhen Quanmeng Technology Co.,Ltd

Shenzhen Quanmeng Technology Co.,Ltd Add: 201, Unit 2,no.1219,Guanguang Road,Guihua Community,Guanlan Street, Longhua District Shenzhen, Guangdong China Date: 2023-7-26 FCC ID: 2AWO9-H1 Dear Sir/Madam, We, Shenzhen Quanmeng Technology Co.,Ltd Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model:

Product name: Bluetooth Headset H1 Model no.: H1, H2,H3,H4,H5,H6,H7,H8,H9 Sincerely, bi que hua NamelTitle : GUO HUA LI/The Manager Company: Shenzhen Quanmeng Technology Co.,Ltd Address: 201, Unit 2,no.1219,Guanguang Road,Guihua Community Guanlan Street,Longhua District Shenzhen,Guangdong China Phone: 86-13016083015 Fax: 0755-83973125 E-Mail: liguohua0604@163.com

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2023-7-26>

Pursuant to Paragraphs 0.457 and 0.459 of the Commission's Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID Model name 2AWO9-H1 H1 For the product stated above, we request that the following information be held confidential;

Long-Term Exhibits Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days Extemal Photos Internal Photos. Block Diagram Schematics Test Setup Photos:

User's Manual Parts List Tune Up moOooARRoo Operational Descriptions:

Dopooo0ol The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, GUO HUA LI/The Manager Shenzhen Quanmeng Technology Co.,Ltd 201,Unit 2,no.1219,Guanguang Road,Guihua Community,Guanlan Street Longhua District Shenzhen,Guangdong China Phone: 86-13016083015 Fax: 0755-83973125 E-Mail: liguohua0604@163.com

Shenzhen Quanmeng Technology Co.,Ltd 201,Unit 2,no0.1219,Guanguang Road,Guihua Community,Guanlan Street,Longhua District Shenzhen,Guangdong China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-7-26 To whom it may concer:

We, the undersigned, hereby authorize Eurofins Product Service GmbH to act.on our behaffin all matters relating to applications for equipment authorization FCC ID: 2AWO9-H1 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins current valid General Terms and Conditions

(AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, ii que hua Name/Title: GUO HUA LI/The Manager Company: Shenzhen Quanmeng Technology Co.,Ltd Address: 201,Unit 2,no.1219,Guanguang Road,Guihua Community Guanlan Street, Longhua District Shenzhen Guangdong China Phone: 86-13016083015 Fax: 0755-83973125 E-Mail: liguohua0604@163.com

-Shenzhen Quanmeg Technology U.S. AgenInformation Co.,Ltd. Commissio Communications and Evaluation Authorization Federal Authorization Equipment 7 435 Oakland Columbia, Mills MD 21046 Branch Road Division n

. Agent Designa 7/20/23

[Shenzhen Quanmeng Technology Co.,Ltd.]

acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: [FCC ID: 2AW09-H1 ]):

Name and company of U.S. agent:FCC Physical of agent:3722 U.S. address US Agent,LL C Illinois Avenue.Saint Charles,IL,6017 4,USA FRN of U.S. agent:0033402884 Email address of U.S. agent:Support@fccusa qent.com

[FCC US Agent,LLC]

acknowledges their obligation to accept service of process on behalf of

[Shenzhen Quanmeng Technology Co.,Ltd.].

[Shenzhen Quanmeng Technology Co.,Ltd.]

with the FRN (0029684057]

accepts its obligation to maintain an agent for service of process in the United States for no less than one year the after either grantee has permanently terminated II marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under2.911 (d)(7). Sincerely, k e Signatu

(Name of U.S. agent]Tim Pavne

[Title of U.S. agent]Manager

[Company of U.S. agent]:FCC US Agent,LLC The information An expiration the granting TCB. provided in this letter is based on the referenced n1le parts of Title 47 of the CFR as well as KDB 986446 DOI. date for tsIet1cr does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via

. O J\'n,

L

P J 6

.NI Iu

-s a n[

v F) P O E