FCC ID: 2AF6B-RAK7289C WisGate Edge Pro

WisGate Edge Pro RAK7289C User Manual PRODUCT NAME: WisGate Edge Pro MODEL NAME: RAK7289C 1 Product description WisGate Edge is RAKwireless flagship line of commercial-grade gateways. Gateways from this product line are designed to work either indoor, customizable in terms of the backhaul connectivity options, antenna type, and power provisioning. RAK7289 WisGate Edge Pro is a LoRaWAN Gateway. It is ideal product for IoT commercial deployment. With its industrial-

grade components, it achieves a high standard of reliability. It supports up to 16 LoRa channels, multi backhaul with Ethernet, Wi-Fi, and Cellular connectivity. Optionally there is a dedicated port for different power options, solar panels, and batteries. With its new enclosure design, it allows the LTE, Wi-Fi, and GPS antennas to be inside the enclosure. The gateway provides for a solid out-of-the-box experience for quick deployment. Additionally, since its software and UI sits on top of OpenWRT it is perfect for the development of custom applications (via the open SDK). Room 506, Bldg B, New Compark, Pingshan First Road, Taoyuan Street, XiLi Town Nanshan District, Shenzhen, China Manufacturers address:

Shenzhen RAKwireless Technology Co., Ltd. Instructions for use and safety information:

For safe commissioning, please read this manual and the documentation of your product. The complete documentation and further information about your product can be found in the RAKwireless Documentation Center: https://docs.rakwireless.com/Product-Categories/WisGate/#wisgate-edge. To do this, enter the product name or item number in the search box and click Search. 2 Packing List Device (1x) Installation Bracket (1x) Cable Gland (1x) LoRa Antenna (1x or 2x) Power Cord (1x) Power Adapter (1x) Waterproof Tape (1x) PVC Insulating tape (1x) 12V Cable (1x) User Manual (1x) 3 Product specifications Feature Computing Wi-Fi feature LoRa feature Frequency Cellular feature Power supply ETH Antenna Ingress protection Enclosure material Operating temperature Installation method Specifications MT7628, DDR2 RAM 128 MB Frequency: 2.4 GHz (802.11 b/g/b/) 2x2 MIMO X Sensitivity: -95 dBm (Min) TX Power: 20 dBm (Max) Operation channels: 2.4 GHz: 1-13 SX1303 mPCIe card (connects maximum of two) 8 Channels (16 channels optional) RX Sensitivity: -139 dBm (Min) TX Power: 27 dBm (Max) Listen Before Talk EU433/CN470/EU868/US915/AS923/AU915/IN865/KR920 Supports Quectel EG95-E/EG95-NA (IoT/M2M -optimized LTE Cat 4 Module) EG95-E for EMEA Region

- LTE FDD: B1/B3/B7/B8/B20/B28A

- WCDMA: B1/B8

- GSM/EDGE: B3/B8 EG95-NA for North America Region

- LTE FDD: B2/B4/B5/B12/B13

- WCDMA: B2/B4/B5 PoE (IEEE 802.3 af), 37~57 VDC RJ45 (10/100 Mbps) LoRa: 1 or 2 N-Type connectors LTE: Internal antenna Wi-Fi: Internal antenna IP67 Aluminum and plastic

-30 C to +55 C Pole or wall mounting 4 Interfaces and connectors RAK7289s interfaces and connectors are illustrated below:

Notes:

The SD card and the SIM card do not support hot-swap. Please always turn off the gateway before you insert or take off SIM or SD card. Do not power the Gateway without connected antenna/s. This may damage the radios. 5 LEDs Status Name Status PWR ON/OFF ETH ON/OFF/FLASH LoRa1 ON/OFF/FLASH LoRa2 ON/OFF/FLASH WLAN ON/OFF/Slow FLASH/FLASH LTE Flash slowly/ Flash quickly Description ON device power on OFF device power off ON link up OFF link down Flash - data transmitting and receiving ON - LoRa1 is working OFF - LoRa1 is not working Flash - LoRa1 packet transmitting and receiving ON - LoRa2 is working OFF - LoRa2 is not working Flash - LoRa2 packet transmitting and receiving OFF - Wi-Fi is disabled AP Mode:

- ON - WLAN is working

- Flash - data transmitting and receiving STA Mode:

- Flash slowly (1Hz) - connection is lost

- ON - connection is successful

- Flash - data transmitting and receiving Flash slowly 1 (200ms Bright/1800ms Dark) - unregistered network (network searching) Flash slowly 2 (200ms Dark/1800ms Bright) - idle status (online) Flash quickly - data transmitting and receiving 6 Installation 6.1 Mounting Instructions on mounting and securing the mounting kit to the enclosure and the bearing pole. Step 1. Fix the device bracket on the bottom of the enclosure with four M6*12 screws as shown below. Step 2. Position and tighten the pole clamps together around the pole with bolts, washers, and nuts. Note: The diameter of the pole that is supported by the brackets is 50-100 mm. If the pole diameter is more than this value, the steel strips can be used. The standard mounting kit does not include steel strips. If needed, they should be purchased separately. Step 3. Hang up the enclosure and fasten it with two M6*12 screws. 6.2 Connecting the PoE Adapter Step 1. Connect the Ethernet cable from the enclosure to the Ethernet port labeled POE on the adapter. Step 2. Connect an Ethernet cable from your LAN network to the Ethernet port labeled LAN on the adapter. Step 3. Connect one end of the power cord to the adapter. Connect the other end of the power cord to a power outlet. 6.3 Weather Protection To better protect the Ethernet cable gland and the antenna connector from the weather, you need to cover them with PVC tape. Step 1. Clean the surface area of the connector that will be wrapped. Wrap a layer of PVC tape with a 50% overlap according to the rotation direction of the connector. Continue wrapping the PVC tape to about 10 mm below the end of the connector. Step 2. Cut off about 50 cm waterproof tape. Stretch it to double the length. Wrap three layers around the connector with a 50% overlap. Hold the tape in place with your hand for a few seconds. Step 3. Wrap three additional layers with PVC tape with natural uncoiling force and a 50% overlap. Make sure to cover the head and the tail of the connector. 7 Accessing the gateway Make sure all the antennas are connected before powering the Gateway. The Gateway comes configured in such a way that you can use either the Ethernet port or the Wi-Fi in AP mode to connect to the Management platform. In both modes you can access the Management UI via a web browser pointing to the IP address of the gateway (check your router DHCP list). Alternately, the IP Address (192.168.230.1) is preconfigured as the one to use for access to the device provided you are directly connected to it. 7.1 Wi-Fi AP mode By default, the gateway is configured to work in Access Point (AP) mode. It has the following parameters:

Wi-Fi - SSID: RAK72XX_xxxx (no password is required to connect via Wi-Fi, "xxxx" represents the last two bytes of Web UI - Connect via a browser to the IP address assigned to the gateway, which is 192.168.230.1 by default. You should see the login page shown below. Use the credentials below:

the gateways MAC address) o UI user: root o UI password: root 7.2 WAN port (DHCP IP) mode Connect the Ethernet cable to the port marked ETH on the Gateway and the other end to the PoE port of the PoE injector. Connect the LAN port of the PoE injector to your PC. The default IP is 169.254.X.X. The last two segments (X.X) are mapped from the last four bits of the MAC address of your gateway. For example, the last four bits of the MAC address are 0F:01, and the IP address is 169.254.15.1. Make sure to manually set the address of your PC to one in the same network (for example 169.254.15.100). Use the same credentials for the Web UI as for AP mode. Note:

Detailed Quick Start Guides for the modules are available in the RAKwireless Documentation Center:

https://docs.rakwireless.com/Product-Categories/WisGate/RAK7289/Overview/#product-description 8 Certification warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution:

Changes or modifications not expressly approved by the part responsible for compliance could void the user's authority to operate the equipment. FCC RF Radiation Exposure Statement Caution: This device shall be installed with a minimum separation distance of 40 cm between the user or bystander and the device. FCC Statement:

"This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help."

IC statement:

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This equipment complies with Industry Canada radiation exposure limits set forth with a separation and this device shall be installed with a minimum separation distance of 40 cm between the user or bystander and the device. L'appareil est conforme aux limites d'exposition aux rayonnements tablies par Industrie Canada et est muni d'un dispositif d'isolement qui doit tre install une distance minimale de 40 cm entre l'utilisateur ou le spectateur et l'appareil. The device must be installed by a trained professional (training in RF Exposure) to ensure that the device is installed correctly with all safeguards in place. L'quipement doit tre install par un professionnel qualifi (formation l'exposition aux radiofrquences) pour s'assurer qu'il est correctement install et que toutes les mesures de protection sont en place.

58mm _ 5mm PRODUCT: WisGate Edge Pro RAK Avil Bord 38 pt Mode: RAKT299C

. K RNZ logo a: 3mm

= WEEE logo ii: 7mm rch: aren naxrzeec 2 & RNZ =

RCM logo##i: 4.5mm Contains FCC ID: 2AF6B-RAK634, 2AF6B-RAK5146, XMR201807EG95NA Contains c:25008-naKes4, 25008 naKst40,1o224a2oteecosua LARL Gweur a 23mm MADEINCHINA 1P67 58mm This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

Arial Regular 6.8pt (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 23mm

Authority to Act as Agent Date: 2021.04.01 TUV Rheinland Group 762 Park Avenue Youngsville, NC 27596 To Whom It May Concern:

I appoint TUV Rheinland (Shenzhen) Co., Ltd. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canadas regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with Shenzhen Rakwireless Technology Co., Ltd. /

Room 506, Tsinghua Harbor, Science and Technology Park North Buildings, Nanshan District, Shenzhen, China For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date:

12 months Title Engineer Telephone

19926584202 By

(Signature) On behalf of

QF094234 Shenzhen Rakwireless Technology Co., Ltd.

(Company Name) Vivian Xu

(Print Name) Page 1 of 1 Revision 0

Confidentiality Letter Date: 2021-11-17 Subject: Confidentiality Request for FCC ID: 2AF6B-RAK7289C Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent Permanent Permanent Permanent Permanent Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Part List/Tune-Up Procedure Schematics Test Setup Photos Users Manual Shenzhen Rakwireless Technology Co., Ltd. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition"

would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-

1705. Sincerely,

(Signature/Title) Vivian Xu

(Print name) By: