RAPOO Frequency Range/: 5727~5804 MHz Channel No./:
Modulation Type /: GFSK Date Rate/:
1Mbps Output Power/: 0dB Output Power/: 0dB 16 3100 P Wireless Optical Mouse Quick Start Guide (V1.1)
ON OFF USB 5.8G Nano Receiver user guide 1. Plug the Nano Receiver into a USB port of your computer. 2. Turn on the Wireless Optical Mouse. 3. Move the Wireless Optical Mouse to get connected with the Nano Receiver. USB Plug the receiver into the usb port. The receiver will match the keyboard automatically. 03041A 5.8G Nano Receiver 5.8G Close Take out Receiver
Press Open Insert the battery, 1.5V AA*1 or 1.5V AA*2 connected in parallel. 1.5V AA*11.5V AA*2
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of FCC RF Rules. Operation is subject to the following two conditions:
1) This device may not cause interference and 2) This device must accept any interference, including interference that may cause undesired operation of the device. Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. NCC
Declaration of Conformity Hereby, ShenZhen Rapoo Technology Co., Ltd, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Canada Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.
M/N Rating:
Approval No:
CMIIT ID: RAPOO
Country (or area) Information Description Hongkong Malaysia Vit Nam
Company name Address Tel#
Vim Yield Company
852-31522789 Company name Address Tel#
AV FUTURE LINK SDN BHD NO.23A,JALAN 5/152,TAMAN PERINDUSTRIAN OUG,PUCHONG,58200 KUALA LUMPUR ,MALAYSIA
(+0060)377830011 Tn cng ty a ch in thoi
CNG TY C PHN K THUT CNG NGH NAM THNH S 7, l 14A, khu th mi Trung Yn, ng Trung Ha, qun Cu Giy, H Ni, Vit Nam 0084-4-37834530
Cable
PWAs
Plastic parts
Metal parts
Rubber parts
(Cr VI
Cable
PWAs Plastic
enclosure
Plastic parts
Metal parts
(Cr VI
5601-07A00-222