FCC ID: A7M-RST67 MagSpeed 2-in-1 Wireless 15W Charging Station

MagSpeed 2-in-1 Wireless 15W Charging Station Model: RST67 B D USER MANUAL A B C D Magnetic wireless output 1 Wireless output 2 Indicator light A C Attaching the Ring For devices other than iPhone 12 series and above, apply the metal attachment ring to the outside of your phone case using the included applicator guide. Metal attachment ring is to be applied directly on the outside of phone cases only. 1. Place the guide over the back of your phone. Align your phone vertically so that each edge matches the same number on both sides. 2. Align your phone horizontally so that each edge matches the same letter on both sides. 3. If there are no obstructions, peel the protective layer from the metal attachment ring, and apply them to your phone case using the applicator guide. Charge Your Device Wirelessly device on the magnetic wireless output (B). Your device should begin to wirelessly charge. To achieve fast charging, ensure you are using a charger that is capable of fast charging. Some cases may interfere with wireless charging if they contain metallic material or are overly thick. Charge your AirPods Place your AirPods wireless charging case on the wireless output 2 (C). Your AirPods should begin to wirelessly charge. See below for indicator light (D) statuses for the wireless output 2 (C). Indicator Light Status Solid blue Powered and on standby Breathing red Wirelessly charging Flashing blue and red Foreign object on wireless output Name MagSpeed 2-in-1 Wireless 15W Charging Station Item Number RST67 5.0V 3.0A (15.0W) 9.0V 3.0A (27.0W) 12.0V 3.0A (36.0W) Wireless Output 1 5.0W, 7.5W, 10.0W, 15.0W Wireless Output 2 5.0W Total Output 20.0W Max Max Output Power

(for EU Compliance) Coil A: -10.14dBuA/m@10m Coil B: -10.54dBuA/m@10m Working Frequency Band Coil A: 121.84-205.12 kHz Coil B: 126.60-128.90 kHz RF exposure required while used 20cm away from the human body. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Hereby, Shenzhen Reflying Electronic Co., Ltd declares that this product is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address by clicking on the Compliance Documentation link at:

www.reflying.com

RST67 MagSpeed 2-in-1 Wireless 15W Charging Station USB-C Input: 9V 3A (Max), 12V 3A (Max) Magnetic Wireless Output: 15W (Max) Wireless Output: 5W (Max) Designed in Australia Manufactured in China FCC ID: A7M-RST67 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Silkprint Pantone Cool Grey 8C DO NOT SCALE DRAWING Printfile_Pelican1_V3 RWC52 TITLE:

DATE 08/09/2021 DRAWN:

RR SCALE:

1:1 REVISION:

A3 SHEET 1 OF 1 RST67 MagSpeed 2-in-1 Wireless 15W Charging Station USB-C Input: 9V 3A (Max), 12V 3A (Max) Magnetic Wireless Output: 15W (Max) Wireless Output: 5W (Max) Designed in Australia Manufactured in China FCC ID: A7M-RST67 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Shenzhen Reflying Electronic Co., Ltd. Date: 12/30/2021 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: A7M-RST67 To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) and Kobe Jian in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Shenzhen Reflying Electronic Co., Ltd. This authorization is valid until further written notice from the applicant. Print Name: Wen Luo Signature:

Title: Manager On behalf of Company: Shenzhen Reflying Electronic Co., Ltd. Telephone: (86) 755-26718925 E-mail: rown@reflying.com

ALOGIC Corporation Pty Ltd. Federal Communications Commission Date: 12/30/2021 Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD. 21046 RE: CHANGE IN IDENTIFICATION OF EQUIPMENT We, ALOGIC Corporation Pty Ltd. (Original Grantee), declare on our sole responsibility that Shenzhen Reflying Electronic Co., Ltd. (New Grantee) may apply Change in FCC Identifier as established in 47CFR 2.933(b) for our approved devices listed below:

FCC ID: 2ATCA-MSP21 (Date of Grant: 12/29/2021) Were also aware that Shenzhen Reflying Electronic Co., Ltd. (New Grantee) intends to file FCC Certification for the aforementioned device under FCC ID: A7M-RST67 Sincerely, Signature:

Print Name: Pratik Kumar Title: Product Manager On behalf of Company: ALOGIC Corporation Pty Ltd. Telephone: +61405653162 E-mail: pratik.kumar@alogic.co To:

Shenzhen Reflying Electronic Co., Ltd. Confidentiality Request regarding application for FCC ID: A7M-RST67 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States To:

Regarding:

SHORT TERM CONFIDENTIALITY The applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photo User manual Print Name: Wen Luo Signature:

Title: Manager On behalf of Company: Shenzhen Reflying Electronic Co., Ltd. Telephone: (86) 755-26718925 E-mail: rown@reflying.com

Shenzhen Reflying Electronic Co., Ltd. Date: 12/30/2021 To:

Federal Communications Commission Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD. 21046 Attention: Equipment Authorization Branch CHANGE IN IDENTIFICATION OF EQUIPMENT We, Shenzhen Reflying Electronic Co., Ltd. (New Grantee) request to apply for a new FCC ID as established in 47CFR 2.933(b) for a certified device. This application will establish a new FCC ID: A7M-RST67 1. The original identification is FCC ID: 2ATCA-MSP21 2. The original grant date is Grant: 12/29/2021 3. The equipment is electrically identical. There is no change in design, circuitry or 4. The original test results are applicable and representative of this changed device. 5. Exterior photographs, Label artwork are included in this application. construction. Sincerely, Signature:

Print Name: Wen Luo Title: Manager On behalf of Company: Shenzhen Reflying Electronic Co., Ltd. Telephone: (86) 755-26718925 E-mail: rown@reflying.com

Cover Letter-Wireless Charger Approval Date: 12/30/2021 Gentlemen:

Theres a Wireless Charger that would like to have your authorization as an Inductive wireless power transfer applications approval. The specific product as below, Wireless Charger, with its designed features and specified description, meets special requirements for KDB 680106 D01 section 5.2 requirements. Company:

Product Name:

Model Number:

FCC ID:

KDB 680106 D01 Section 5.2 Requirements a) Power transfer frequency is less that 1 MHz MagSpeed 2-in-1 Wireless 15W Charging Station Shenzhen Reflying Electronic Co., Ltd. RWC52, RST67 Complied A7M-RST67 Product Technical Specification Result Output 1: 114.16-205.36 kHz Output 2: 126.60-128.90 kHz Output 1: 15W max. Output 2: 5W max. Complied Complied Complied Complied Complied Please refer to RF exposure report b) Output power from each primary coil is less than or equal to 15 watts. c) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils d) Client device is placed directly in contact with the transmitter. e) Mobile exposure conditions only f) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Print Name: Wen Luo Signature:

Title: Manager On behalf of Company: Shenzhen Reflying Electronic Co., Ltd. Telephone: (86) 755-26718925 E-mail: rown@reflying.com