Wireless Charger Product Introduction Wireless charger is an intelligent product, with simple design and compatible with any mobile phones with Qi standard. Mobile phone is without plug when charging, which is more convenient and efcient . It can bring you with limitless life experience as well as safe and free experience with wireless charging function. Product Outline LED indicator area Aviation aluminum shell Frosted PC plate Use Manual Applicable Devices 1, Devices with built-in wireless charging receiver(Nokia 1520,LG,Nexus 5 and more). 2, Devices with reserved wireless charging interface beside it battery(Samsung Galaxy S3,S4,S5,S6,S7,Note2,Note3,Note4,Note5,etc). 3.Devices with wireless charging receiver in its protection case(iPhone5/5s,iPhone6,iPhone6 plus,iPhone7,iPhone8,iPhoneX,etc). Note:All devices must be Qi standard. Instructions 1, Insert one end of USB charging cable into power adaptor or computer. shown as below. Power adaptor should be 5V 2A, 9V 1.67A with PD function. 2. Insert another end of USB charging cable into Micro USB port of the wireless charger. The LED indicator lights up to indicate well connectivity. 3. Place your phone on the wireless charger. Make sure that the phone is well located at the charging area of wireless charger. When the phone is being charged. the LED indicator will light up automatically to show charging status. Input Port of Power Supply Non-slip Pads Standard Accessories Wireless Charger USB cable User Manual Product Specication Input: 9V/1.67A 5V/2A Output: 5V/2A (max) 9V/1.47A(max) Charging Distance:8mm Charging Efciency:76%
Size:100mm X 5MM Attention:
1, Please keep the charger away from water or other liquid. 2.If you need to clean the charger, please make sure it is not connected power supply. 3. Using Environment temperature remains 0-45 NOTE: This equipment has been tested and found to comply with the limits for a wireless power charger, pursuant to Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This equipment has been tested and found to comply with the limits for a WPC device, pursuant to Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the product.