Bonsai Bluetooth Speaker Lamp with Wireless Charging Pad User GuideEnglish E n g l i s h
Shining Tree x1 Model Name: Shining Tree Thank you for choosing our product! Shining Tree is a LED night lamp with multiple uses. BT Chipset: Realtek RTL876ATV BT Frequency: 2.4GHZ BT Prole: A2DP, AVRCP Introduction Thank you for choosing our product! Tree of Light is a LED night lamp with multiple uses. You can control the brightness with simple touch or slide. At the base of the lamp, you can wirelessly charge your favourite devices. Also it can connect to your smartphone, tablet or computer to give you fantastic music experience through BT (BT function apply to specic model).With all these functions compiled in one single body, it becomes a must have for every household and oce. Specication Packaging Contents Model Name: Tree of Light Tree of Light x1 Wireless Charging: 5V, 1A Charging Adaptor x1 Brightness: 200Lumens User Guide x1 Output Voltage: 5V Working Conditons Max Output Current: 800mA Conversion Rate: 70%~75%
Indoor Use only Temperature: -40~40/ -40~104 Humidity: 40%~60%
Precautions Please read all safety instructions and warnings thoroughly before using this product. Improper use of this product may result in damage to this or attached products. 1. Do not disassemble the product or attempt to x it. 2. Kindly use an original charging cable provided. 3. Do not attempt to replace any part of this product or battery inside. 4. Do not crush, puncture, dispose of in re, short the contacts or expose the product to water or other liquids. 5. Do not store or use the product in a high-temperature environment, including intense sunlight or heat. 6. Avoid drops, bumps, abrasions and impacts. 7. If there is any reason to believe that there is damage to the product, discontinue use immediately. 8. If you nd that the product is too hot, is emitting an odour, or is deformed, punctured or exhibits any suspicious or abnormal behaviour, discontinue use immediately and contact our customer service. 9. The product is not suitable using for Children. Table of Features E n g l i s h BT Metallic design Fast charging NFC c S Appearance & Interface Description MS-W10 1. Charge-In Port 2. LED Light 3. Wireless Charging Pad 4. LED Brightness Controller 5. Wireless Charging Indicator Light Operation Instructions MS-W10 1. Plugging in AC Adapter E n g l i s h 2. Turning the LED Light On/O Light on automatically when plugging in. Long Touch the LED Brightness Controller to turn on or o the light. Short touch for switching three gears of brightness 3. Wireless Charging Place your QI Wireless Charging enabled smartphone over the Wireless Charging Pad. The indicator light on pad will change into blue, and it will be o automatically in 10 secs 4. Charging Position Appearance & Interface Description MS-W10 E n g l i s h 1. Play/Pause(long press for BT) 2. LED Light 3. Wireless Charging Pad(apply to B2) 4. LED Brightness Controller 5. Charge-In port 6. Charging Indicator Light 7. Volume/Next Song 8. Volume/Previous Song 9. NFCSpecial model only) 10. Bluetooth Indicator 9 10 Appearance & Interface Description MS-W10 1. Plugging in AC Adapter E n g l i s h 2. Turning the LED Light On/O Light on automatically when plugging in. Touch the LED Brightness Controller again to turn o the light. Touch the LED Brightness Controller for 3 seconds to activate Auto-Sleep mode and light o within 30 mins. 3. Brightness control Slide your nger over the LED Brightness Controller to dim or brighten the LED light. 4. Wireless Charging (apply for partial models) Place your QI Wireless Charging enabled smartphone over the Wireless Charging Pad. Then begin to charge. The indicator light on pad will change from yellow into ice blue. 5. Paring Tree of Light Press Power Button until the Bluetooth indicator ashes with Disconnected notication sound or certain sound. Turn on the BT function of your devices and scan HomeTree out. Pair to HomeTree with Connect notication sound or certain sound. To control the volume and playback via paired device or top pad of Tree of Light. Quick click or to control volume. Long press for next song and for previous song. The blue indicator light will be o if Tree of Light not in use for a long time. FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. FCC Statement This device complies with Part 18 of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and any other radio device. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45-30 MHz. Variations of this language are permitted provided all the points of the statement are addressed and may be presented in any legible font or text style.