FCC ID: 2ASNSRB17P Two Way Radio

RB17P Two Way Radio Users Manual For downloading further resources:

Brochures, Software/Firmware, Manual etc, Pls contact your direct reseller first OR go to website retevis.com and check support in the each product link to download it. Directory Unpack and check the device........................................ Accessories..................................................................... Charging battery.............................................................. About Radio..................................................................... The parts of radio............................................................ LCD Display...................................................................... 3 Basic Operations............................................................. Functions and Operation................................................ Battery.............................................................................. NOAA function................................................................. Squelch level................................................................... CTCSS/DCS..................................................................... Switch working channel................................................. CTCSS Table.................................................................... CDCSS Standard Table................................................... Frequency Table.............................................................. 1 1 1 1 2 3 3 4 4 4 4 5 5 6 7 Unpack and check the device Please take the walkie-talkie out of package carefully.We recommend that check all the accessories as the below table list before you discard the package. If you find any accessory is missing or damaged, please contact your local seller. Accessories Item Quantity Antenna 1 Sling 1 Belt Clip 1 Charger 1 Battery 1 Manual 1 Charging battery Please use the specified charger to charge the battery: the indicator light of the charger can show the charging status. Charging status Indicator Show Battery charging mode The Red Light is on Full battery The Green Light is on About Radio 3.Antenna 4.Alarm button 5.Speaker 6.Menu button 7.Up 1.PTT Button 2.Progra-

mmable Side button 12.Power/

volume switch 11.Status indicator 10.Back Button 9.Down 8.Confirm Button 1 13.MIC/SP jack 14.Battery pack 15.Battery lock The parts of radio 1.PTT Button:

APress PTT can talk 2.Programmable Side button ASet as the CTCSS/DCS menu: Short press will switch: OFF -> CTCSS ->

DCS N -> DCS I -> OFF BShort press activate the function you set.Optional Function: scan, vox, sub-channel transmit, NOAA, Monitor(Cancel squelch) CLong press activate Monitor FunctionCancel squelch 3.Antenna AReceive and transmit signal 4.Alarm button A:In standby state, press this top Alarm button to activate Alarm.The Alarm mode can be programmed by its software. (local or local+ remote) B: When alarm is on. No key operation will work.After sending the alarm bell for 20s, standby 10s and repeat again and again. C: Press PTT button exit the alarm 5.Speaker A: Output Audio 6.Menu button APress will into Menu setting 7.Up A: In the programming setting, press the up button. B: In channel mode standby, switch scan direction in scan mode. C: Long press to achieve quick rollover 8.Confirm Button A: In menu operation, short press to confirm;

B: In standby, long press to open or close the keyboard lock. 9.Down A: In the programming setting, press the down button. B: In channel mode standby, switch scan direction in scan mode. C: Long press to achieve quick rollover 10.Back Button A: Short press during menu operation to return to the previous level, short press during standby to switch the main frequency to A or B;

B: Long press to start scanning; Activate NOAA channel scan when NOAA is on. When NOAA is off or standby, press to activate radio scan. 11. Status indicator A: The red light is on when transmitting, and the green light is on when receiving. 12. Power/volume switch A: Turn on or off the walkie-talkie/ Adjust the volume of the walkie-talkie. 13. MIC/SP jack A: It is used for external earphones, and can also be connected to the programming cable to program your radio 14. Battery pack A: Supply power for your walkie talkie 2 LCD Display No. Icon 1 2 3 4 5 6 7

8 9 10 11 6 7 8 9 Describe Save Mode 14 KeyTone Battery status CTCSS/DCS Narrow band Companding function A band working frequency Current Channel Number High power Current working Channel B band working frequency NOAA Keypad Lockout Menu A/B band switch Basic Operations 1.Power On A: When the radio is off, turn the power/volume switch knob clockwise to power on the walkie-talkie. 2.Power off:

A: In the power-on state, turn the power/volume switch knob counterclockwise to power off. 3.Adjust the volume A: When turned on, turn the power/volume switch knob clockwise to increase the volume; turn the power/volume switch knob counterclockwise to decrease the volume. Functions and Operation AIn standby, Press button into menu; LCD display shows menu introduction and settings. 3 B:Press / button choose the menu you want, press to confirm into setting C:Press / button to choose the setting you want, press to confirm your setting. D:Press button to exit the menu. Battery A:When the battery is fully charged, the green battery icon will be displayed on the upper right corner of the LCD display B:When the battery is low, the battery is marked yellow. C:When the battery is low power, the battery is marked with red; and the red flashed and voice prompts: "low power"

D:When the battery is about to run out, radio will automatically shut down. The LCD display will show: "please charge!" before shutting down. NOAA function A:When activating the NOAA, the squelch is also turn on. The state will be maintained for 300 seconds(5 minutes) to return back to Channel Mode. B:In NOAA working mode, radio can't receive and transmit signal. C:When the NOAA watch function is enabled: In both NOAA and channel mode, you need to receive 1050Hz signaling to enable NOAA reception, otherwise you cannot switch to NOAA mode D:In NOAA and Channel mode dual watch duty: At 1050Hz, it will switch to the receiving state after the "beep, beep" tone is emitted. Squelch level A: This function can filter out incoming signals that are not strong enough to produce clear emissions to eliminate unwanted noise. B: Squelch level 0~9 can be selected, under normal circumstances, the default setting is: 5;

users can set the appropriate squelch mode according to their needs. CTCSS/DCS You can set CTCSS/DCS. Select the CTCSS/DCS to encode or decode from the existing list.( For specific CTCSS/DCS value, please refer to the following CTCSS/DCS tables) A: Decode: The walkie-talkie at the receiving end needs to decode the subtones sent by the walkie-talkie at the sending end. When the subtone set here matches the subtone from the sender, the speaker will be turned on and the voice will be output;

B: Encode: The radio at the transmitting end encodes the sub-tones before sending the voice and adds the code to the voice and sends it out through the carrier. The receiver will turn on the speaker and output the voice when it receives a match with the sub-tone set here. 4 Switch working channel The current working interface can be set to different frequencies of the A/B band, and the A/B band will be standby working when the dual watch function is turned on. Press key to switch between A/B. In the upper right corner of the current working frequency band, display. 1.Power saving mode Enabling this function can make the walkie-talkie automatically enter the power-saving mode. The power-saving mode can extend the battery standby time, but it will also cause a delay in response time. The user can set the wake-up time ratio when the machine enters the power-saving mode. You can choose 1:4, 1:8, and off. The smaller the ratio, the more obvious the radio enters the power-saving mode. The default power-saving mode:

2.Key tone Allow users to turn on and off the key tone through the menu. The icon is displayed when it is turned on, and it is not displayed when it is turned off. 3.Companding function This function is an audio companding function that can improve the signal-to-noise ratio of the received audio signal, make the subject's voice clearer and reduce background noise. Show when turned on: No icon will be displayed when turned off. 4.Power selection Allows the user to adjust the high/low of the radio transmission power through the menu. High power display: H, low power display: L. 5.Keyboard lock Allow users to lock the keyboard through the menu. The keyboard lock screen displays . In the keyboard lock, except PTT and side keys, no other key operations can be performed; long press to unlock and lock operations. CTCSS Table CTCSS Frequency CTCSS Frequeny CTCSS Frequency CTCSS Frequency No. [Hz] No. [Hz] No. [Hz] No. [Hz]

199.5 1 67.0 14 203.5 2 69.3 15 206.5 3 71.9 16 210.7 4 74.4 17 218.1 5 77.0 18 225.7 6 79.7 19 229.1 7 82.5 20 233.6 8 85.4 21 241.8 9 88.5 22 250.3 10 91.5 23 254.1 11 94.8 24 12 97.4 25 13 100.0 26 27 159.8 40 28 162.2 41 29 165.5 42 30 167.9 43 31 171.3 44 32 173.8 45 33 177.3 46 34 179.9 47 35 183.5 48 36 186.2 49 37 189.9 50 38 192.8 39 196.6 103.5 107.2 110.9 114.8 118.8 123.0 127.3 131.8 136.5 141.3 146.2 151.4 156.7 5 CDCSS Standard Table CDCSS Encode Decode CDCSS Encode Decode CDCSS Encode Decode NO NO NO 1 D023N D023I 29 D174N D174I 57 D445N D445I 2 D025N D025I 30 D205N D205I 58 D464N D464N 3 D026N D026I 31 D223N D223I 59 D465N D465N 4 D031N D031I 32 D226N D226I 60 D466N D466I 5 D032N D032I 33 D243N D243I 61 D503N D503I 6 D043N D043I 34 D244N D244I 62 D506N D506I 7 D047N D047I 35 D245N D245I 63 D516N D516I 8 D051N D051I 36 D251N D251I 64 D532N D532I 9 D054N D054I 37 D261N D261I 65 D546N D546I 10 D065N D065I 38 D263N D263I 66 D565N D565I 11 D071N D071I 39 D265N D265I 67 D606N D606I 12 D072N D072I 40 D271N D271I 68 D612N D612I 13 D073N D073I 41 D306N D306I 69 D624N D624I 14 D074N D074I 42 D311N D311I 70 D627N D627I 15 D114N D114I 43 D315N D315I 71 D631N D631I 16 D115N D115I 44 D331N D331I 72 D632N D632I 17 D116N D116I 45 D343N D343I 73 D654N D654I 18 D125N D125I 46 D346N D346I 74 D662N D662I 19 D131N D131I 47 D351N D351I 75 D664N D664I 20 D132N D132I 48 D364N D364I 76 D703N D703I 21 D134N D134I 49 D365N D365I 77 D712N D712I 22 D143N D143I 50 D371N D371I 78 D723N D723I 23 D152N D152I 51 D411N D411I 79 D731N D731N 24 D155N D155I 52 D412N D412I 80 D732N D732N 25 D156N D156I 53 D413N D413I 81 D734N D734I 26 D162N D162I 54 D423N D423I 82 D743N D743I 27 D165N D165I 55 D431N D431I 83 D754N D754I 28 D172N D172I 56 D432N D432I 6 Frequency Table Channel RX TX GMRS CTCSS/DCS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Power bandwidth 462.5625 462.5625 HIGH 12.5KHz 462.5875 462.5875 HIGH 12.5KHz 462.6125 462.6125 HIGH 12.5KHz 462.6375 462.6375 HIGH 12.5KHz 462.6625 462.6625 HIGH 12.5KHz 462.6875 462.6875 HIGH 12.5KHz 462.7125 462.7125 HIGH 12.5KHz 467.5625 467.5625 LOW 12.5KHz 467.5875 467.5875 LOW 12.5KHz 467.6125 467.6125 LOW 12.5KHz 467.6375 467.6375 LOW 12.5KHz 467.6625 467.6625 LOW 12.5KHz 467.6875 467.6875 LOW 12.5KHz 467.7125 467.7125 LOW 12.5KHz 462.5500 462.5500 HIGH 12.5KHz 462.5750 462.5750 HIGH 12.5KHz 462.6000 462.6000 HIGH 12.5KHz 462.6250 462.6250 HIGH 12.5KHz 462.6500 462.6500 HIGH 12.5KHz 462.7250 462.7250 HIGH 12.5KHz 467.5500 462.5500 HIGH 12.5KHz 467.5750 462.5750 HIGH 12.5KHz 467.6000 462.6000 HIGH 12.5KHz 467.6250 462.6250 HIGH 12.5KHz 467.6500 462.6500 HIGH 12.5KHz 467.6750 462.6750 HIGH 12.5KHz 467.7000 462.7000 HIGH 12.5KHz 467.7250 462.7250 HIGH 12.5KHz 7 67.0 118.8 127.3 131.8 136.5 141.3 146.2 D243N D032N D047N D051N D053N D065N D116N 123.0 D743I D332I 127.3 D243I 136.5 136.5 136.5 136.5 136.5 136.5 136.5 136.5 136.5 462.6750 462.6750 HIGH 12.5KHz D606N 462.7000 462.7000 HIGH 12.5KHz D731I RF ENERGY EXPOSURE AND PRODUCT SAFETY GUIDE FOR PORTABLE TWO-WAY RADIOS Before using this radio, read this guide which contains important operating instructions for safe usage and rf energy awareness and control for compliance with applicable standards and regulations. ATTENTION!

This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or more users over a distance. RF energy, which when used improperly, can cause biological damage. All Retevis two-way radios are designed, manufactured, and tested to ensure they meet government-established RF exposure levels. In addition, manufactur-

ers also recommend specific operating instructions to users of two-way radios. These instructions are important because they inform users about RF energy exposure and provide simple procedures on how to control it. Please refer to the following websites for more information on what RF energy exposure is and how to control your exposure to assure compliance with established RF exposure limits:http://www.who.int/en/

Local Government Regulations When two-way radios are used as a consequence of employment, the Local Government Regulations requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your Retevis two-way radio has a RF Exposure Product Label. Also, your Retevis user manual, or separate safety booklet includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements. Radio License Governments keep the radios in classification, business two-way radios operate on radio frequencies that are regulated by the local radio management departments (FCC, ISED, OFCOM, ANFR, BFTK, Bundesnetzagentur...).To transmit on these frequencies, you are required to have a license issued by them. The detailed classification and the use of your two radios, please contact the local government radio management departments. Use of this radio outside the country where it was intended to be distributed is subject to government regulations and may be prohibited. Unauthorized modification and adjustment Changes or modifications not expressly approved by the party responsible for compliance may void the users authority granted by the local government radio management departments to operate this radio and should not be made. To comply with the corresponding requirements, transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representative of the user of those services. 8 Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the local government radio management departments equipment authorization for this radio could violate the rules. FCC Requirements:

This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. (Licensed radios are applicable);

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (Other devices are applicable)

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. NOTE:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CE Requirements:

(Simple EU declaration of conformity) Shenzhen Retevis Technology Co., Ltd. declares that the radio equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU; the full text of the EU declaration of conformity is available at the following internet address:

www.retevis.com. Restriction Information This product can be used in EU countries and regions, including: Belgium (BE), Bulgaria (BG), Czech Republic (CZ), Denmark (DK), Germany (DE), Estonia 9

(EE), Ireland (IE), Greece (EL), Spain (ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta

(MT), Netherlands (NL), Austria (AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden (SE) and United Kingdom (UK). For the warning information of the frequency restriction, please refer to the package or manual section. Disposal The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union, all electrical and electronic products, batteries, and accumulators (rechargeable batteries) must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area. IC Requirements:

Licence-exempt radio apparatus This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) lappareil ne doit pas produire de brouillage;

(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. RF Exposure Information DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may also cause you to exceed RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio, and the antenna gain shall not exceed the specified gain by the manufacturer declared. DO NOT transmit for more than 50% of total radio use time, more than 50% of the time can cause RF exposure compliance requirements to be exceeded. During transmissions, your radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites. Portable Device, this transmitter may operate with the antenna(s) documented in this filing in Push-to-Talk and body-worn configurations. RF exposure compliance is limited to the specific belt-clip and accessory configurations as documented in this filing and the separation distance between user and the device or its antenna shall be at least 2.5 cm. 10 Mobile Device, during operation, the separation distance between user and the antenna subjects to actual regulations, this separation distance will ensure that there is sufficient distance from a properly installed externally-mounted antenna to satisfy the RF exposure requirements. Occupational/Controlled Radio, this radio is designed for and classified as Occupational/Controlled Use Only, meaning it must be used only during the course of employment by individuals aware of the hazards, and the ways to minimize such hazards; NOT intended for use in a General population/uncon-

trolled environment. General population/uncontrolled Radio, this radio is designed for and classified as General population/uncontrolled Use. RF Exposure Compliance and Control Guidelines and Operating Instructions To control your exposure and ensure compliance with the occupational/controlled environment exposure limits, always adhere to the following procedures. Guidelines:

User awareness instructions should accompany the device when transferred to other users. Do not use this device if the operational requirements described herein are not met. Operating Instructions:

Transmit no more than the rated duty factor of 50% of the time. To Transmit

(Talk), push the Push to Talk (PTT) button. To receive calls (listen), release the PTT button. Transmitting 50% of the time, or less, is important because the radio generates measurable RF energy exposure only when transmitting in terms of measuring for standards compliance. Transmit only when people outside the vehicle are at least the recommended minimum lateral distance away from a properly installed according to installation instructions, externally mounted antenna. When operating in front of the face, worn on the body, always place the radio in a Retevis approved clip, holder, holster, case, or body harness for this product. Using approved body-worn accessories is important because the use of Non-Retevis approved accessories may result in exposure levels, which exceed the IEEE/ICNIRP RF exposure limits. Hand-held Mode Hold the radio in a vertical position with the microphone (and other parts of the radio including the antenna) at least 2.5 cm (one inch) away from the nose or lips. The antenna should be kept away from the eyes. Keeping the radio at a proper distance is important as RF exposure decreases with increasing distance from the antenna. Phone Mode When placing or receiving a phone call, hold your radio product as you would a wireless telephone. Speak directly into the microphone. Electromagnetic Interference/Compatibility NOTE: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic compatibility 11 Avoid Choking Hazard Small Parts. Not for children under 3 years. Turn off your radio power in the following conditions:

WARNING Turn off your radio before removing (installing) a battery or accessory or when charging battery. Turn off your radio when you are in a potentially hazardous environments: Near electrical blasting caps, in a blasting area, in explosive atmospheres (inflammable gas, dust particles, metallic powders, grain powders, etc.). Turn off your radio while taking on fuel or while parked at gasoline service stations. To avoid electromagnetic interference and/or compatibility conflicts Turn off your radio in any facility where posted notices instruct you to do so, hospitals or health care facilities (Pacemakers, Hearing Aids and Other Medical Devices) may be using equipment that is sensitive to external RF energy. Turn off your radio when on board an aircraft. Any use of a radio must be in accordance with applicable regulations per airline crew instructions. Protect your hearing:

WARNING Avoid Burns WARNING Use the lowest volume necessary to do your job. Turn up the volume only if you are in noisy surroundings. Turn down the volume before adding headset or earpiece. Limit the amount of time you use headsets or earpieces at high volume. When using the radio without a headset or earpiece, do not place the radio's speaker directly against your ear Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss Note: Exposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the radio's volume, the less time is required before your hearing could be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect. Antennas Do not use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with the skin when the radio is in use, a minor burn can result. Batteries (If appropriate) When the conductive material such as jewelry, keys or chains touch exposed terminals of the batteries, may complete an electrical circuit

(short circuit the battery) and become hot to cause bodily injury such as burns. Exercise care in handling any battery, particularly when placing it inside a pocket, purse or other container with metal objects 12 Safety Operation WARNING Long transmission When the transceiver is used for long transmissions, the radiator and chassis will become hot. Forbid Do not use charger outdoors or in moist environments, use only in dry locations/conditions. Do not disassemble the charger, that may result in risk of electrical shock or fire. Do not operate the charger if it has been broken or damaged in any way. Do not place a portable radio in the area over an air bag or in the air bag deployment area. The radio may be propelled with great force and cause serious injury to occupants of the vehicle when the air bag inflates. To reduce risk Pull by the plug rather than the cord when disconnecting the charger. Unplug the charger from the AC outlet before attempting any maintenance or cleaning. Contact Retevis for assistance regarding repairs and service. The adapter shall be installed near the equipment and shall be easily accessible Approved Accessories Contact Retevis for assistance regarding repairs and service. The adapter shall be installed near the equipment and shall be easily accessible This radio meets the RF exposure guidelines when used with the Retevis accessories supplied or designated for the product. Use of other accessories may not ensure compliance with the RF exposure guidelines and may violate regulations. For a list of Retevis-approved accessories for your radio model, visit the following website: http://www.Retevis.com MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES AND FEDERAL LAW. WARNING WARNING 13 Guarantee Model Number:

Serial Number:

Purchasing Date:

Dealer: Telephone:

Users Name: Telephone:

Country: Address:

Post Code: Email:

1.This guarantee card should be kept by the user, no replacement if lost. 2.Most new products carry a two-year manufacturers warranty from the date of purchase. Remarks:

l P e a s e c u t a o n g w l i t h t h i s l i n e Further details, pls read http://www.retevis.com/after-sale/

3.The user can get warranty and after-sales service as below:

Contact the seller where you buy. Products Repaired by Our Local Repair Center 4.For warranty service, you will need to provide a receipt proof of purchase from the actual seller for verification Exclusions from Warranty Coverage:

1.To any product damaged by accident. 2.In the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs. 3.If the serial number has been altered, defaced, or removed. 7/F, 13-C, Zhonghaixin Science&Technology Park, No.12 Ganli 6th Road, Jihua Street, Longgang District, Shenzhen, China Web: www.retevis.com E-mail: kam@retevis.com Facebook: facebook.com/retevis MADE IN CHINA 90*130mm

Two Way Radio Model:RB17P Voltage:7.4V Max Power'5W Frequency:GMRS FCC ID:2ASNSRB17P Fe RETGS |

2108R17P1100001 Shenzhen Retevis Technology Co.,Ltd. MADE IN CHINA //

Shenzhen Retevis Technology Co., Ltd. Agent Authorization Company: Shenzhen Retevis Technology Co., Ltd. Address: Room 700,7/F, 13-C, Zhonghaixin Science&Technology Park, No.12 Ganli 6th Road, Jihua Street, Longgang District, Shenzhen, China Product Name: Two Way Radio Model Number(s): RB17P Product Description: Two Way Radio We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2021-11-25 Name:

Weidong Shen Company: Shenzhen Retevis Technology Co., Ltd.

Shenzhen Retevis Technology Co., Ltd. _________________________________________________________________________________________ Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2021-11-23 Subject; Request for Confidentiality FCC ID: 2ASNSRB17P To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely ______________________________ Shenzhen Retevis Technology Co., Ltd. Contact person: Weidong Shen

___________________________________________________________________________________________ Shenzhen Retevis Technology Co., Ltd. Declaration Letter Date: 2021-11-24 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division Subject: Declaration of compliance to the requirements of 15.121 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2ASNSRB17P Dear Sir/Madam, We declare that, this scanning receiver is incapable of operating (tuning), or readily being altered by the users to operate, within the frequency bands allocated to the Cellular Radiotelephone Service in part 22 of this chapter (cellular telephone bands). This device will not be able to receive transmissions in the cellular telephone bands by means of clipping the leads of, or installing, a simple component such as a diode, resistor or jumper wire;

replacing a plug-in semiconductor chip; or programming a semiconductor chip using special access codes or an external device, such as a personal computer. This device is also incapable of converting digital cellular communication transmissions to analog voice audio. This device is designed so that the tuning, control and filtering circuitry is inaccessible. Any attempts to modify the equipment to receive transmissions from the Cellular Radiotelephone Service will render the receiver inoperable. This scanning receiver rejects any signals from the Cellular Radiotelephone Service frequency bands that are 38 dB or lower based upon a 12 dB SINAD measurement. We are aware that the modification of this device to receive transmissions from Cellular Radiotelephone Service frequency bands will be considered to constitute manufacture of such equipment. This includes any individual, individuals, entity or organization that modifies one or more scanners. Any modification to receive transmissions from the Cellular Radiotelephone Service frequency bands voids the certification of the scanning receiver, regardless of the date of manufacture of the original unit. Sincerely Yours, Signature:

___________________________ Weidong Shen, General Manager