Wireless charger instructions lines for charging. The operation Respected users:
Hello! Thank you for using this product and believe that the product will bring you a new and comfortable experience. If you have any advice on this product in the process of use, please contact our company in time. There are many kinds of mobile phone interfaces in the market. Different devices need different charging is troublesome and the connectors are easy to wear. The QI standard wireless charger solves this problem very well. As long as the mobile phone device integrating the QI standard receiving circuit can be used, Use this product for charging, no physical plug, no wear and tear, easy to use, please check the instructions for use, all the consequences caused by illegal operation beyond the product specifications have nothing to do with the company. Please read this manual carefully before using this product. 1. The content of product packaging Wireless charging host 1set Using instructions Certificate of qualification Maintenance card 2. About wireless charger With a wireless charger, you can recharge your cell phone or other compatible devices and avoid the trouble of recharging the cable. Just put your cell phone on the charging board, and the cell phone will start to recharge. Some parts of this product have magnetic properties. Metal materials may be adsorbed on this product. Do not make credit cards or other magnetic storage media close to this product so as not to lose their stored information because of demagnetization. 3. QI is a global standard for realize wireless charging for devices. For QI compatible devices, you do not need to connect any cable. Just put your equipment on the charging surface. About QI 4. Charging for the equipment Make sure there is no sundries on the electric board Put your cell phone or other compatible devices on the charging board. When the white indicator lights up, the battery is full of electricity. It's a normal phenomenon that charging boards and mobile phones are hot. If you use mobile phones when charging, such as streaming music, charging boards and mobile phones may become hotter. Status Orange breathing light Green fast blink Green light on Status description Normal charging Abnormal charging Charge Complete Wireless Charger RN02
-20-+70 5-9V 5W/10W
>70%
110.5KHz-205KHz 5V/9V 1A/1.2A Indicator light 5. Indicator light name Charging Indicator 6.Basic parameters Product name Model Work temperature Input voltage Transmitting power Efficiency Work frequency Output voltage Maximum output current FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. FCC Radiation Exposure Statement This equipment complied with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.