Bluetooth headset R505 Users Guide 1. Introduction The blue tooth headset allows your freedom to make and receive calls while on the move or in the office. You can connect the headset to a compatible phone that supports Bluetooth wireless technology Read this user guide carefully before using the headset, Read the user guide for your phone, which provides important safety and maintenance information, Keep the headset and Its accessories out of reach of small children. Bluetooth wireless technology Bluetooth wireless technology allows you to connect compatible communication devices without cables, A blue tooth connection does not require the phone and the headset be in line of sight, but both devices should be within 10 meters(30feet)of each others. Connections can be subject to interference from obstructions, such as walls, or other electronic devices. The headset is compliant with the Bluetooth specification3.0+EDR supporting the following profiles: Headset Profile1.1 and Hands-free profile1.5 check with the manufacturers of other devices to determine the compatibility with this device There may be restrictions on using Bluetooth technology in same locations Check with your local authorities or service provider. 1. Get started Overview The headset contains the following parts
(1) Ear loop
(2) Bluetooth headset Before you start using the headset, you must charge the battery and connect the headset with a compatible phone. Note: parts of the headset are magnetic, metallic material may be attracted to the headset. Do not place credit cards or other magnetic storage media near the headset, because information stored on them maybe erased Chargers and Batteries Check the specification of any charger before using it with this device Warning: use only approved chargers with this particular enhancement. The use of any other types may invalidate any approval or warranty and maybe dangerous For availability of approved enhancement, please check with your dealer, when you disconnect the power cord of any enhancement grasp and pull the plug, not the cord Battery Charging This device has an internal non-removable, rechargeable battery Do not attempt to remove the battery from the device as you may imagine . 1. Connect the charger to the headset 2. Connect the charger. The red indicating light will be on during charging, disconnect the charger if charging does not start. Plug it in again, and retry. Charging the battery fully may take 2 hours 3. when the battery is fully charged, the red indicator turns off and the blue indicating light turns on. Disconnect the charger from the wall outlet and the headset The fully charged battery takes 4 hours for talking-time and 7.5 hours stand by time. However, the talking and stand by time may vary with different mobile phones, products that use Bluetooth connection, usage settings, styles and environments On/ Off Switching To switch On, press and hold the power key for 2sec or until you see the blue indicator or hear a beep ready for use. To switch Off, press and hold the power key, until you see the red indicator or hear a beep. Connecting the headset to a compatible phone, 1. activate the Bluetooth feature on your phone and have it ready to search for Bluetooth devices, see user guider of your phone for instructions 2. press the power button of the headset for about 5 seconds until you see blue-red light blinking 3. Search the Bluetooth device on your mobile phone 4. from the list of device, select our Bluetooth headset model 5. enter the password or code 0000 to connect the headset. In some phones you may need to make the connection separately after connecting, see the user guide of your phone for instructions 6. if the connection is successful the headset will beep and appear in the phone menu, where you can view the currently connected Bluetooth devices Disconnect the headset from the phone To disconnect the headset from your phone (for example to connect the phone to another Bluetooth device) Do one of the following Switch off the headset Disconnect the headset in the Bluetooth menu of your phone Move the headset more than 10 meters (30feet) Away from the phone You do not need to delete the connection with the headset to disconnect it Reconnect the headset to your phone To connect the headset to your phone, switch on the headset make the connection in the Bluetooth menu of your phone or press and hold the answer/end key You can set your phone to connect with the headset automatically when the headset is switched on, By changing your connected device settings in the Bluetooth menu. Trouble shooting If you can not connect the headset to your phone, do as follows. Ensure that the headset is charged, switched on, and paired with and connected to your phone Ensure that the Bluetooth feature is activated on your phone check that the headset is within 10 meters (30feet) of your phone and that there are no obstructions between the headset and the phone, such as walls or other electronic devices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help Shenzhen Roman Technology CO.,LTD Floor4,buildingC,Fengmenao Industrial Park,Gangtou Bantian. Longgang district.Shenzhen