FCC ID: 2AZ7M-K02 wireless keyboard

Keyboard instruction

**Please read the instructions carefully before use**

Caps Indicator Light Power Indicator Light Charging interface Power switch devices may have some function keys inconsistent with the table or unresponsive. refer to the actual situation of the product. Unusual characters in IOS system please use with Alt or Alt+Shift, Please use the WIN/AND system with Alt Gr. Function key: when the key has more than one character or function icon, press Fn or Fn+Shift. Please refer to the following instructions according to the actual functions of the purchased products : (Partial product support) OFF/ON Note: Based on the open source nature of the operating system, different brands of Touch the mouse: Different operating system, gesture command will be different, please Single finger slipping Double finger sliding Double finger scaling function of the keyboard. By pressing this icon key, you can (turn on/Adjust the brightness/turn off) the luminous Charging Current:

200mA Awaken Time:

2~3 Seconds Wireless Indicator Light Keyboard connection operation:

red, please charge in time). 1. Turn on the power supply, and the green indicator light will be lit for one second (if the instruction is Press the matching key "Fn+C/ " for 1 second, the Wireless indicator lights flicker into the pairing state, and the effective time is about 120 seconds. Open the Wireless search function of the external device, click the "Wireless Keyboard" searched. After the pairing is successful, the indicator lights go out, and you can use the keyboard. 2. If there is no operation in 10 minutes, the keyboard will go to sleep state and wait for 2~3 seconds by any key to wake up. when the switch is successful. Fn+And is converted to Android ;

Fn+Win is converted to Windows;

Fn+iOS is converted to iOS. Disconnect the keyboard connection:

If you want to break the connection between keyboard and device, please clear the pairing information in the device, or turn off the keyboard power directly. Electricity indicator:

If the power indicator light is red slowly, the power is low, please charge it in time, the WINDOWS ANDROID IOS Back To Home Back To Home Back To Home Searching Searching Searching Email Browser Email Browser Virtual Keyboard Change Input Method Screenshots Screenshots Screenshots Reduce Backlight Reduce Backlight Reduce Backlight Volume Down Volume Down Volume Down Play/pause Next Song Sound Off Volume Up Lock Screen WINDOWS Back Windows Play/pause Play/Pause Next Song Sound Off Next Song Sound Off Volume Up Volume Up Lock Screen ANDROID Lock Screen IOS Back Cancel the input The function keys CMD=Command Avoid clicking in the lower Avoid clicking in the lower left corner right corner Note: please refer to the following instructions according to the actual functions of the keyboard:

Increase Backlight Increase Backlight Increase Backlight

(Partial product support) Please select the input program from the system of the corresponding device, press "FN+And/ Win/ IOS" for 1 seconds to switch, And the bluetooth light will light up Previous Song Previous Song Previous Song Touch the area at the lower Touch the area at the lower left, press with one finger as right, press with one finger to left click, as shown in the right click, as shown in the figure figure If the light can not be lit, or immediately after the light off, please timely charge; If the battery capacity is below 20%, the keyboard will force this function off. This icon indicates that the keyboard supports luminous function :

(Partial product support) If in the off state, press to turn on the luminescence, then press the brightness to increase 30%, then press the brightness to increase 30% again, then press again to turn off the luminescence; Loop through. FN+ can adjust the luminous color, and switch between different colors in turn. Note:

Special notes:

The battery life of the keyboard with luminous function is about 3-6 hours when the battery capacity is 100% (related to luminous brightness). Turn off the light for about 300 hours. Basic parameters: (part of the parameters are objective factors will vary). Working Voltage:

3.0V~4.2V Working Current:

3.0mA Working Time:

80 Hours Low Voltage Alert:

3.0~3.3V Sleeping Current:

0.3mA Battery Standby Time:

100 Days Battery Capacity:

150mAh Keystrokes:

Keyboard Lifetime:

300 Mlillion Times Charge Input:

Connect Distance:

10m Charging Time:

50g~70g 5V 1A 2~3 Hours Charging Port:

Micro USB (or Type-C) Working Temperatur:

-10C~+55C Matching Password: No Maintenance and warning:

* Do not squeeze or twist, clap the keyboard.

* Do not scan the microwave and get away from the magnetic field.

* Away from the liquid and used in a dry environment.

* Clean the keyboard with soft cloth, do not turn off the power for a long time.

* Other routine maintenance of electronic products. Common connection Troubleshooting:

* Make sure the power is turned on and the battery is sufficient.

* Make sure that the keyboard is within the range of working distance.

* Make sure that the Wireless related function of the device has been opened.

* Make sure that the keyboard and the device have been paired.

* Clear device pairing record and turn off Wireless function; re match.

* Please do not connect multiple Bluetooth keyboards at the same time; if necessary, please connect one by one.

** This product will not be updated in time for continuous product improvement. If there is any discrepancy, please refer to physical products. red light is bright when charging. When the indicator is green, it is full, please Stop Using Mouse Stop Using Mouse Stop Using Mouse disconnect the charging power to ensure safety.

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

Fn Fn+Shift

( ) OFF/ON IOS Alt lt+Shift WIN/AND Alt Gr WINDOWS ANDROID IOS 30%

30%

FN+

3.0V~4.2V 3.0mA 80 3.0~3.3V 0.3mA 100 150mAh 50g~70g 300 5V 1A 10m 2-3 200mA 2~3 MicroUSB (TYPE-C)

-10~+55 20%

100%

3~6 ( ) 300

1 1 Fn+C/ 1 120 Wireless Keyboard 2 10 2~3

, FN+And/ Win/ IOS 1 Fn+And Android Fn+Win Windows Fn+IOS IOS

- 2 -

Windows CMD=Command

- 1 -

- 3 -

- 3 -

- 4 -

- 4 -

- 5 -

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment

Shenzhen Rongjing Electronics Co., Ltd. C5266091_X10_Ed.2 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2AZ7M-K02 To Whom It May Concern, Date: Jun 03, 2021 Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No Short-Term Confidentiality NOTE 2 No No No No NOTE 1 NOTE 1 No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are the equipment. The public considered as proprietary information in operation of disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. short-term Confidentiality, the applicant requests the exhibits selected In case of above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. 1/1 C5266091_X10_Ed.2 Sincerely, Signature:

Name: Zhang Kuan Title: Manager 1/1

Model difference declaration letter Differences Description We Shenzhen Rongjing Electronics Co., Ltd. state:

wireless keyboard K02K03K05K06K07K08K09K10 K11K12K13K14K15K16K17X60 X61X62X63X64X65X66X67X68 X69X70X71X72X73X74X75X76 X77K18, K19 The above product with same circuit, PCB layout, electrical parts, materials and wiring structures, Appearance shape, the materials of decorative accessories is same, only different color, Product Model Name Signatory Date: 06-03-2021

<Signature>

NameZhang Kuan TitleManager CompanyShenzhen Rongjing Electronics Co., Ltd. Address Room 301,Building B,Lancui Pavilion,Xinguang Community,No. 10, Xinsha Road,Xinsha Community,Shatou Street,Futian District,Shenzhen

C5266091_X8_Ed.1 Letter of Authorization Shenzhen Rongjing Electronics Co., Ltd. Company: Shenzhen Rongjing Electronics Co., Ltd. Address: Room 301,Building B,Lancui Pavilion,Xinguang Community,No. 10, Street,Futian Community,Shatou Road,Xinsha Xinsha District,Shenzhen Product Name: wireless keyboard Model Number: K02K03K05K06K07K08K09K10K11K12 K13K14K15K16K17X60X61X62X63X64X65X66X67 X68X69X70X71X72X73X74X75X76X77K18, K19 FCC Identifier: 2AZ7M-K02 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. is allowed to forward all Name: Zhang Kuan Date: Jun 03, 2021 Title: Manager Signature of applicant:

1/1